POLYMER SEARCH

BASF Ultramid® 8260 40% Mineral Filled PA6 (Dry)

Category	Polymer , Thermoplastic , Nylon , Nylon 6 , Nylon 6, 40% Mineral Filled
Manufacturer	BASF
Trade Name	Ultramid®
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultramid® 8260 40% Mineral Filled PA6 (Dry).pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Ultramid 8260 is a 40% mineral reinforced PA6 injection molding compound. It possesses high stiffness, dimensional stability and heat resistance combined with excellent processability including low warp and resistance to sink-mark formation. It is also available in heat stabilized (Ultramid 8260 HS) versions. It can be painted or chrome plated and is also available in pigmented versions.

Physical Properties	Metric	English	Comments
Density	1.291 g/cc	0.04664 lb/in³	Melt; ISO 1183
	1.49 g/cc	0.0538 lb/in³	ISO 1183
Water Absorption	1.1 %	1.1 %	24 hour; ISO Test
	5.7 %	5.7 %	ISO 62
Moisture Absorption at Equilibrium	1.6 %	1.6 %	23°C/50% R.H.; ISO 62
Linear Mold Shrinkage	0.0090 cm/cm	0.0090 in/in	ASTM Data; MD

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell R	119	119	ASTM Test
Tensile Strength at Break	90.0 MPa	13100 psi	0.2 in/min; ASTM Test
Tensile Strength, Ultimate	85.0 MPa	12300 psi	5mm/min; ISO 527
Elongation at Break	10 %	10 %	5mm/min; ISO 527
	10 %	10 %	0.2 in/min; ASTM Test
Tensile Modulus	6.40 GPa	928 ksi	1mm/min; ISO 527
	0.970 GPa @Temperature 120 °C	141 ksi @Temperature 248 °F	ISO Data
	1.36 GPa @Temperature 80.0 °C	197 ksi @Temperature 176 °F	ISO Data
	8.31 GPa @Temperature -40.0 °C	1210 ksi @Temperature -40.0 °F	ISO Data
Flexural Strength	138 MPa	20000 psi	ASTM Test
	140 MPa	20300 psi	ISO Data
	34.0 MPa @Temperature 120 °C	4930 psi @Temperature 248 °F	ASTM Test
	35.0 MPa @Temperature 93.0 °C	5080 psi @Temperature 199 °F	ASTM Test
	55.0 MPa @Temperature 65.0 °C	7980 psi @Temperature 149 °F	ASTM Test
	207 MPa @Temperature -40.0 °C	30000 psi @Temperature -40.0 °F	ASTM Test
Flexural Modulus	5.20 GPa	754 ksi	ISO Data
	5.76 GPa	835 ksi	ASTM Test
	0.810 GPa @Temperature 93.0 °C	117 ksi @Temperature 199 °F	ASTM Test
	0.815 GPa @Temperature 120 °C	118 ksi @Temperature 248 °F	ASTM Test
	1.54 GPa @Temperature 65.0 °C	223 ksi @Temperature 149 °F	ASTM Test
Izod Impact, Notched	0.530 J/cm @Thickness 3.17 mm	0.993 ft-lb/in @Thickness 0.125 in	ASTM Test
Izod Impact, Unnotched	16.4 J/cm	30.7 ft-lb/in	ASTM Test
Charpy Impact Unnotched	11.5 J/cm²	54.7 ft-lb/in²	ISO 179
Charpy Impact, Notched	0.300 J/cm²	1.43 ft-lb/in²	ISO 179
	0.300 J/cm² @Temperature -30.0 °C	1.43 ft-lb/in² @Temperature -22.0 °F	ISO 179

Thermal Properties	Metric	English	Comments
CTE, linear	50.0 µm/m-°C @Temperature -30.0 - 30.0 °C	27.8 µin/in-°F @Temperature -22.0 - 86.0 °F	ASTM Test
CTE, linear, Parallel to Flow	46.0 µm/m-°C	25.6 µin/in-°F	ISO 11359
CTE, linear, Transverse to Flow	58.0 µm/m-°C	32.2 µin/in-°F	ISO 11359
Specific Heat Capacity	1.999 J/g-°C	0.4778 BTU/lb-°F	Melt
Thermal Conductivity	0.281 W/m-K	1.95 BTU-in/hr-ft²-°F	Melt
Melting Point	220 °C	428 °F	10 K/min
	220 °C	428 °F	ASTM Test
Deflection Temperature at 0.46 MPa (66 psi)	195 °C	383 °F	ISO 75
Deflection Temperature at 1.8 MPa (264 psi)	125 °C	257 °F	ASTM Test

Electrical Properties	Metric	English	Comments
Volume Resistivity	>= 1.00e+13 ohm-cm	>= 1.00e+13 ohm-cm	IEC 60093

Processing Properties	Metric	English	Comments
Melt Temperature	275 °C	527 °F	Injection molding
Mold Temperature	95.0 °C	203 °F	Injection molding

Descriptive Properties	Value	Comments
Color	Natural
Commercial Status	Active America
Form	Pellets
Impact Modified	No
Primary Processing Technique	Injection Molding
Processing	Injection Molding
Special characteristic	X

Users viewing this material also viewed the following: