Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Deflection Temperature at 1.8 MPa (264 psi) = 105 °C Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
Deflection Temperature at 1.8 MPa (264 psi) 105 °C
221 °F
Flatw 80*10*4 sp=64mm; ISO 75/Af
SABIC Innovative Plastics Cycoloy® CY9650 PC+ABS
PC+ABS, High Impact and High Flow, ductility at low temperature, excellent properties retention after Hydrolytic and Heat AgingThis data was supplied by SABIC-IP for the Americas region.
Deflection Temperature at 1.8 MPa (264 psi) 105 °C
221 °F
Flatw 80*10*4 sp=64mm; ISO 75/Af
SABIC Innovative Plastics Cycoloy® CY9650 PC+ABS (Asia Pacific)
PC+ABS, High Impact and High Flow, ductility at low temperature, excellent properties retention after Hydrolytic and Heat AgingThis data was supplied by SABIC-IP for the Asia Pacific region.
Deflection Temperature at 1.8 MPa (264 psi) 105 °C

@Thickness 6.35 mm
221 °F

@Thickness 0.250 in
Unannealed; ASTM D648
PolyOne Edgetek® XT XT-100-BW00 Natural Polycarbonate + PBT (PC+PBT)
EDGETEK™ XT High Performance Polymers are polycarbonate and polyester alloys that combine strength, durability and chemical resistance. The Edgetek XT product family includes a complete line of gen..
Deflection Temperature at 1.8 MPa (264 psi) 105 °C

@Thickness 6.40 mm
221 °F

@Thickness 0.252 in
ASTM D648
Kingfa MAC-501 Modified PC/ABS Alloy
Features:Excellent balance propertiesGood weather resistanceGood impact strengthGood processing propertiesSuit for electro-platingApplications:Injection moldingAutomobile license plateWater tank cov..
Deflection Temperature at 1.8 MPa (264 psi) 105 °C
221 °F
ASTM D648
LG Chemical LUCEL FW-7005 Friction and Wear Resistant POM, Oil filled
LUCEL semi-crystalline acetal copolymer resins are produced by gas phase polymerization. LUCEL resins can be widely accepted as the replacement of thermosets, aluminum and zinc die-casts or other m..
Deflection Temperature at 1.8 MPa (264 psi) 105 °C

@Thickness 6.40 mm
221 °F

@Thickness 0.252 in
Unannealed; ASTM D648
LG Chemical Lupox® TE5000S PBT+PC
Description: Injection Molding, PBT+PC, High Impact, Dimensional Stability, Good WeatherabilityApplication: Automotive (Roof Rack)CAS No. 137050-02-03, 24968-12-5 and 103598-77-2Information provided..
Deflection Temperature at 1.8 MPa (264 psi) 105 °C
221 °F
Ineos ABS Lustran® H950
Very high heat resistance,,Property data per ISO test methods.
Deflection Temperature at 1.8 MPa (264 psi) 105 °C

@Thickness 3.17 mm
221 °F

@Thickness 0.125 in
ASTM D648
Metton LMR M2100VO Liquid Molding Resin
Metton LMR is a tough and durable engineering plastic material used to produce large or thick molded parts for many diversified applications. The Metton LMR reaction injection molding process can ..
Deflection Temperature at 1.8 MPa (264 psi) 105 °C

@Thickness 3.20 mm
221 °F

@Thickness 0.126 in
unannealed; ASTM D648
SABIC Innovative Plastics LNP LUBRILOY D20001 PPO
LNP* LUBRILOY* Z20001 is a compound based on PPO resin containing Proprietary Lubricant. Added features of this material include: Wear Resistant, Flame Retardant.
Deflection Temperature at 1.8 MPa (264 psi) 105 °C

@Thickness 6.40 mm
221 °F

@Thickness 0.252 in
ASTM D648
Samsung Cheil Industries Starex® GR-4020 ABS, 20% Glass Filled
Information provided by Samsung Cheil Industries.
Deflection Temperature at 1.8 MPa (264 psi) 105 °C
221 °F
Edgew 120*10*4 sp=100mm; ISO 75/Ae
SABIC Innovative Plastics NORYL PX1185 PPE+HIPS (Europe-Africa-Middle East)
NORYL PX1185 is a special NORYL grade developed for extrusion of automotive trims. NORYL PX1185 offers high heat resistance and good impact performance.
Deflection Temperature at 1.8 MPa (264 psi) 105 °C
221 °F
ASTM D648
Supreme Petrochem SP 6450 High Heat Polystyrene
Characteristics High impact and modulus Very good flow properties High heat resistance & strength Available in any dark colorProcessing Injection moldingApplications Instrument enclosures Automo..
Deflection Temperature at 1.8 MPa (264 psi) 105 °C

@Thickness 6.40 mm
221 °F

@Thickness 0.252 in
unannealed; ASTM D648
SABIC Innovative Plastics NORYL N1050 PPE+HIPS (Asia Pacific)
Noryl* N1050 is an unfilled, injection moldable modified polyphenylene ether resin. Designed for good dimensional stability and good flow , this resin also uses non-chlorinated, non-brominated FR ad..
Deflection Temperature at 1.8 MPa (264 psi) 105 °C

@Thickness 6.40 mm
221 °F

@Thickness 0.252 in
unannealed; ASTM D648
SABIC Innovative Plastics NORYL N1052P PPE+HIPS (Asia Pacific)
PPE+PS 105deg.C FR V-2
Deflection Temperature at 1.8 MPa (264 psi) 105 °C

@Thickness 3.20 mm
221 °F

@Thickness 0.126 in
unannealed; ASTM D648
SABIC Innovative Plastics NORYL PX0844 PPE+PS
PPE+PS blend. Unfilled. UL94 HB rated. Low water absorption. Hydrolytic stability. Dimensional stability.
Deflection Temperature at 1.8 MPa (264 psi) 105 °C
221 °F
0.5 inch; ASTM D648
PlastxWorld CEVIAN® EG106 ABS
Inherently Static Dissipative and Glass Fiber reinforced ABS.These are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by Plastx..
Deflection Temperature at 1.8 MPa (264 psi) 105 °C
221 °F
0.5 inch unannealed; ASTM D648
PlastxWorld CEVIAN® SKG20 20% GF ABS
Glass fiber reinforced, heat resistant and flame retarded ABS.These are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by Plast..
Deflection Temperature at 1.8 MPa (264 psi) 105 °C
221 °F
DIN 53461
Polyram RamTal RM2309 Acetal, Injection Molding
Acetal copolymer for injection molding applicationsInformation provided by Polyram Ram On Ind.
Deflection Temperature at 1.8 MPa (264 psi) 105 °C
221 °F
ISO 75-1/-2
EMS-Grivory Grivory® GTR 45 PA6I/6T
Product description: Grivory GTR 45 is a transparent engineering thermoplastic based on amorphous, partially aromatic copolyamide for injection molding. Compared to other semi crystalline polyamides..
Deflection Temperature at 1.8 MPa (264 psi) 105 °C
221 °F
0.125 in bar Annealed 4 hours at 80°C; ASTM D648
Diamond Polymers ABS 4001H3F
Description: Heat Resistant Grade, High HeatInformation provided by Diamond Polymers, Inc.
Deflection Temperature at 1.8 MPa (264 psi) 105 °C
221 °F
0.125 in bar Annealed 4 hours at 80°C; ASTM D648
Diamond Polymers ABS 4001HH
Description: Heat Resistant Grade, High HeatInformation provided by Diamond Polymers, Inc.
Deflection Temperature at 1.8 MPa (264 psi) 105 °C
221 °F
0.25 in bar Unannealed/Conditioned 40 hours at 23°C; ASTM D648
Diamond Polymers SE 3 HH
Description: High Heat ABSInformation provided by Diamond Polymers, Inc.
Deflection Temperature at 1.8 MPa (264 psi) 105 °C
221 °F
Method A - Annealed; ASTM D-648
Bhansali Engineering Abstron IMG-1115 Glass Reinforced Grade
Glass Reinforced ABS & SAN Resins for product specific requirement of very high rigidity and temperatureInformation provided by Bhansali
Deflection Temperature at 1.8 MPa (264 psi) 105 - 115 °C
221 - 239 °F
ASTM D648
Arkema Group KYNAR® 740 Black/Red Polyvinylidene Fluoride Homopolymer - Injection Molding and Extrusion
Characteristics: Pigmented. High stability in harsh thermal, chemical and ultraviolet environments. High toughness and mechanical strength, low permeability, abrasion resistance; high purityAppli..
Deflection Temperature at 1.8 MPa (264 psi) 105 °C
221 °F
0.25 inch; ASTM D648
PlastxWorld CEVIAN® A1700 PA/ABS Alloy, DAM
Property data is for dry as molded (DAM) samples.Information provided by PlastxWorld Inc.
Deflection Temperature at 1.8 MPa (264 psi) 105 °C

@Thickness 6.40 mm
221 °F

@Thickness 0.252 in
Unannealed; ASTM D648
LG Chemical LUPOY GN5201F PC/ABS+GF20%, Halogen Free Flame Retardant
Description: Injection Molding, PC/ABS+GF20%, Halogen Free Flame Retardant, High StiffnessApplication: E&E (Housing, OA Frame)CAS: 103598-77-2, 9003-56-9, 181028-79-5 and 65997-17-3Information provi..
Copyright © lookpolymers.com All Rights Reserved