BASF Ultradur S 4090 G6 30% Glass Filled PBT

Category	Polymer , Thermoplastic , Polyester, TP , Polybutylene Terephthalate (PBT) , Polybutylene Terephthalate (PBT), 30% Glass Fiber Filled
Manufacturer	BASF
Trade Name	Ultradur S
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	BASF Ultradur S 4090 G6 30% Glass Filled PBT.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

Ultradur S 4090 G6 is a 30% glass reinforced PBT+ASA blend. It produces moldings with good surface finish, is resistant to chemicals and stress cracking, and has low shrinkage and warpage.Applications: Plug connectors, housings and sunroof.

Physical Properties	Metric	English	Comments
Density	1.47 g/cc	0.0531 lb/in³	ISO 1183
Water Absorption	0.40 %	0.40 %	DIN 53495/1L
Moisture Absorption at Equilibrium	0.20 %	0.20 %	23°C/50% R.H.
Viscosity Test	105 cm³/g	105 cm³/g	Viscosity number; ISO 1628
Linear Mold Shrinkage, Flow	0.0010 cm/cm	0.0010 in/in	Sheet
	0.0029 cm/cm	0.0029 in/in	60x60x2mm; ISO 294
Linear Mold Shrinkage, Transverse	0.0075 cm/cm	0.0075 in/in	60x60x2mm; ISO 294
	0.0075 cm/cm	0.0075 in/in	Sheet
Melt Flow	23.9 g/10 min @Load 2.16 kg, Temperature 275 °C	23.9 g/10 min @Load 4.76 lb, Temperature 527 °F	ISO 1133

Mechanical Properties	Metric	English	Comments
Ball Indentation Hardness	164 MPa	23800 psi	ISO 2039-1
Tensile Strength at Break	125 MPa	18100 psi	5mm/min; ISO 527-2
Tensile Strength	65.0 MPa @Temperature 100 °C	9430 psi @Temperature 212 °F	ISO 527
	120 MPa @Temperature 50.0 °C	17400 psi @Temperature 122 °F	ISO 527
	150 MPa @Temperature 23.0 °C	21800 psi @Temperature 73.4 °F	ISO 527
	195 MPa @Temperature -40.0 °C	28300 psi @Temperature -40.0 °F	ISO 527
Elongation at Break	2.2 %	2.2 %	5mm/min; ISO 527-2
Modulus of Elasticity	9.70 GPa	1410 ksi	ISO 527-2
Flexural Strength	183 MPa	26500 psi	ISO 178
Charpy Impact Unnotched	5.90 J/cm²	28.1 ft-lb/in²	ISO 179/1eU
Charpy Impact, Notched	0.900 J/cm²	4.28 ft-lb/in²	ISO 179/1eA
Dart Drop, Total Energy	<= 5.00 J	<= 3.69 ft-lb	ISO 6603-1
Tensile Creep Modulus, 1000 hours	6700 MPa	972000 psi	ISO 899-1

Thermal Properties	Metric	English	Comments
CTE, linear, Parallel to Flow	3.00 µm/m-°C @Temperature 23.0 - 80.0 °C	1.67 µin/in-°F @Temperature 73.4 - 176 °F	DIN 53752
Specific Heat Capacity	1.50 J/g-°C	0.359 BTU/lb-°F	IEC 1006
Thermal Conductivity	0.290 W/m-K	2.01 BTU-in/hr-ft²-°F	DIN 52612
Melting Point	220 - 225 °C	428 - 437 °F
Maximum Service Temperature, Air	110 °C	230 °F	at 50% loss of tensile strength after 20000h; IEC 216-1
	140 °C	284 °F	at 50% loss of tensile strength after 5000h; IEC 216-1
	170 °C	338 °F
Deflection Temperature at 0.46 MPa (66 psi)	210 °C	410 °F	ISO 75-2
Deflection Temperature at 1.8 MPa (264 psi)	175 °C	347 °F	ISO 75-2
Flammability, UL94	HB @Thickness 1.60 mm	HB @Thickness 0.0630 in
	HB @Thickness 0.800 mm	HB @Thickness 0.0315 in
Flame Spread	<= 100 mm/min	<= 3.94 in/min	DIN 75200
Glow Wire Test	760 °C @Thickness 3.00 mm	1400 °F @Thickness 0.118 in	IEC 695

Electrical Properties	Metric	English	Comments
Volume Resistivity	3.00e+15 ohm-cm	3.00e+15 ohm-cm	IEC 60093
Surface Resistance	1.00e+14 ohm	1.00e+14 ohm	IEC 60093
Dielectric Constant	3.7 @Frequency 1.00e+6 Hz	3.7 @Frequency 1.00e+6 Hz	IEC 60250
	3.8 @Frequency 100 Hz	3.8 @Frequency 100 Hz	IEC 60250
Dielectric Strength	95.0 kV/mm	2410 kV/in	IEC 243/1
Dissipation Factor	0.0030 @Frequency 100 Hz	0.0030 @Frequency 100 Hz	IEC 60250
	0.018 @Frequency 1.00e+6 Hz	0.018 @Frequency 1.00e+6 Hz	IEC 60250
Comparative Tracking Index	125 V	125 V	Test solution B; IEC 60112
	500 V	500 V	Test solution A; IEC 60112

Processing Properties	Metric	English	Comments
Melt Temperature	250 - 275 °C	482 - 527 °F	Injection molding
	270 °C	518 °F	for shrinkage test
Mold Temperature	60.0 - 100 °C	140 - 212 °F
	80.0 °C	176 °F	for shrinkage test

Descriptive Properties	Value	Comments
Color	Natural
Commercial Status	Active America
Form	Pellets
Impact Modified	No
Primary Processing Technique	Injection Molding
Processing	Injection Molding
Special characteristic	Heat stabilized or stable to heat
	Light stabilized or stable to light
	Lubricant
	U.V. stabilized or stable to weather

Users viewing this material also viewed the following: