- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 66
- Nylon 66, Extruded
- Ashley Polymers Ashlene® 538 Nylon 66
Ashley Polymers Ashlene® 538 Nylon 66
| Category | Polymer , Thermoplastic , Nylon , Nylon 66 , Nylon 66, Extruded |
| Manufacturer | Ashley Polymers |
| Trade Name | Ashlene® |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Ashley Polymers Ashlene® 538 Nylon 66.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
A general purpose high viscosity extrusion grade Nylon 66.Data provided by the manufacturer
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.14 g/cc | 0.0412 lb/in³ | ASTM D792 |
| Water Absorption | 1.2 % | 1.2 % | 24 hrs; ASTM D570 |
| Water Absorption at Saturation | 8.5 % | 8.5 % | ASTM D570 |
| Linear Mold Shrinkage | 0.0125 cm/cm | 0.0125 in/in | ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 118 | 118 | ASTM D785 |
| Tensile Strength, Yield | 85.0 MPa | 12300 psi | ASTM D638 |
| Elongation at Break | 90 % | 90 % | ASTM D638 |
| Flexural Modulus | 3.00 GPa | 435 ksi | ASTM D790 |
| Izod Impact, Notched | 0.640 J/cm | 1.20 ft-lb/in | ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 254 °C | 489 °F | ASTM D3418 |
| Deflection Temperature at 0.46 MPa (66 psi) | 220 °C | 428 °F | ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 100 °C | 212 °F | ASTM D648 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Electrical Resistivity | 1.00e+15 ohm-cm | 1.00e+15 ohm-cm | ASTM D257 |
| Dielectric Constant | 3.5 @Frequency 1e+6 Hz |
3.5 @Frequency 1e+6 Hz |
ASTM D150 |
Users viewing this material also viewed the following:
- PolyOne Nymax™ GF 600 A 33 Natural Polyamide 6 (Nylon 6)
- Polymax® Maxelast® P1740 TPE, PP Overmold or Standalone use
- LG Chemical LC100 Polyolefin Elastomer
- Techmer ES HiFill® ABS E GM5 LE 5% Glass Filled
- ExxonMobil Exxsol™ Isohexane Dearomatized Fluid
- 3M 25A25 Co-Extruded Polyethylene Protective Tapes
- Amco PRIMATOP HDPE RP 011 Granular High Density Polyethylene
- Arlon RBLW401R##-P1 0.040" (1.02 mm) Cured Self-Fusing Silicone Rubber
- DuPont Performance Polymers Crastin® LW9020 NC010 PBT+ASA (Unverified Data**)
Copyright © lookpolymers.com All Rights Reserved