- HOME
- POLYMER SEARCH
- Thermoset
- Silicone
- Silicone Rubber
- Silicone, Molded, Glass Fiber Filled
- Arlon 51976XA015 Silicone Rubber/Fiberglass Laminate
Arlon 51976XA015 Silicone Rubber/Fiberglass Laminate
| Category | Polymer , Thermoset , Silicone , Silicone Rubber , Silicone, Molded, Glass Fiber Filled |
| Manufacturer | Arlon |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Arlon 51976XA015 Silicone Rubber/Fiberglass Laminate.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Side 1: cured silicone rubber; Substrate: 7628 fiberglass; Side 2: uncured silicone rubber; Interleave: 3 mil polyethylene
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.44 g/cc | 1.44 g/cc | silicone property; Arlon SQA-TMS-024 |
| Thickness | 88.9 microns | 3.50 mil | side 1; Arlon SQA-TMS-003 |
| 140 microns | 5.50 mil | side 2; Arlon SQA-TMS-003 | |
| 203 microns | 8.00 mil | substrate; Arlon SQA-TMS-003 | |
| 432 microns | 17.0 mil | overall; Arlon SQA-TMS-003 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 62 | 62 | silicone property; ASTM D2240 |
| Tensile Strength, Ultimate | 8.89 MPa | 1290 psi | silicone property; ASTM D412 |
| Elongation at Break | 150 % | 150 % | silicone property; ASTM D412 |
| Adhesive Bond Strength | 0.0207 MPa | 3.00 psi | Arlon SQA-TMS-011 |
| Tear Strength | 14.5 kN/m | 83.0 pli | Die B; silicone property; ASTM D624 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Maximum Service Temperature, Air | 232 °C | 450 °F | |
| Minimum Service Temperature, Air | -56.7 °C | -70.0 °F | |
| Flammability, UL94 | V-1 | V-1 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 31.9 kV/mm | 811 kV/in | ASTM D149 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 120 min @Temperature 204 °C |
2.00 hour @Temperature 400 °F |
|
| 15.0 min @Pressure 0.345 MPa, Temperature 121 °C |
0.250 hour @Pressure 50.0 psi, Temperature 250 °F |
||
| Shelf Life | 6.00 Month @Temperature 23.9 °C |
6.00 Month @Temperature 75.0 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | Gray |
Users viewing this material also viewed the following:
- Quadrant EPP Ertacetal® H POM-H, extruded (ISO Data)
- H.C. Starck Amperit® 782.3 Titanium Oxide (TiO2)
- SABIC Innovative Plastics Ultem ATX100F PEI+PCE
- Teknor Apex Monprene® MP 1527 Thermoplastic Elastomer
- CMT Materials HYTAC® LP Syntactic Plug Assist System for Heavy-Gauge Thermoforming
- Aclo Accutech Polypropylene Homopolymer HP0334W10L1 Wollastonite Reinforced
- Carmel Olefins IPETHENE® 213 Low Density Polyethylene
- BASF Ultraform N 2640 Z6 UNC POM
Copyright © lookpolymers.com All Rights Reserved