- HOME
- POLYMER SEARCH
- Oxide
- Silicon Oxide
- Aremco Ceramabond™ 618-N High Temperature Ceramic Adhesive/Paste, Silica Filled
Aremco Ceramabond™ 618-N High Temperature Ceramic Adhesive/Paste, Silica Filled
| Category | Ceramic , Oxide , Silicon Oxide |
| Manufacturer | Aremco |
| Trade Name | Ceramabond™ |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aremco Ceramabond™ 618-N High Temperature Ceramic Adhesive/Paste, Silica Filled.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Aremco's ceramic adhesives are easy to use, one- and two-component systems which air dry in 1-2 hrs and are ready for use following a 200 to 700 °F cure. These materials are mostly water-based and do not outgas after curing. They are also environmentally safe, non-flammable materials which contain no volatile organic compounds.General Features: Low CTE, Good Strength Bonding: Ceramic to Ceramic, Quartz Principal Use: Tubes, Vessels, Sensors
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.80 - 1.90 g/cc | 0.0650 - 0.0686 lb/in³ | |
| Volatile Organic Compounds (VOC) Content | 0.000 g/l | 0.000 g/l | |
| Viscosity | 40000 - 60000 cP | 40000 - 60000 cP |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Impact Test | 104 J | 77.0 ft-lb | Torque Strength; curing at 1000°F |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 0.594 µm/m-°C | 0.330 µin/in-°F | |
| Maximum Service Temperature, Air | 1650 °C | 3000 °F |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Dielectric Strength | 6.14 kV/mm | 156 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Processing Temperature | 50.0 - 90.0 °C | 122 - 194 °F | Application Temp |
| Cure Time | 120 min @Temperature 93.3 °C |
2.00 hour @Temperature 200 °F |
Step 1, preceeded by 1-4 hour air set |
| 120 min @Temperature 260 °C |
2.00 hour @Temperature 500 °F |
Step 2 | |
| 120 min @Temperature 371 °C |
2.00 hour @Temperature 700 °F |
Step 3 | |
| Shelf Life | 6.00 Month @Temperature 4.44 - 32.2 °C |
6.00 Month @Temperature 40.0 - 90.0 °F |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Acid Resistance | Good | |
| Alkali Resistance | Good | |
| Color | Off-White | |
| Moisture Resistance | Excellent | |
| Solvent | Water | |
| Thinner | 618-N-T |
Users viewing this material also viewed the following:
- Plaskolite Optix® CA - 1000 E-2 High Impact Grade Acrylic Resin
- NYCOA 1417HS PA 6
- SABIC Innovative Plastics Cycoloy® C1200 PC+ABS
- Guarniflon PTFE G405 Polytetrafluoroethylene 25% Glass Fiber
- CP-Polymer-Technik Wellamid® 6600 HWUVCP Nylon 66, UV Stabilized, Heat Stabilized, Dry
- Eurotec® Tecotek® PC43 GR20 BK002 PC, 20% glass fiber reinforced, black
- Arlon 31570R015 0.015" (0.381 mm) Uncured Unsupported Silicone Rubber on a HDPE Carrier
- Ceradyne SEMICORE® S1-5C Specials SmCo5 Samarium Cobalt Magnet
- Ashley Polymers Ashlene® 827L-25G Nylon 6, 25% Glass Reinforced
- 3M 7744 Polyester Overlaminating Film
Copyright © lookpolymers.com All Rights Reserved