- HOME
- POLYMER SEARCH
- Thermoset
- Epoxy
- Epoxy Adhesive
- Aremco Aremco-Bond™ 2320 High Performance Epoxide
Aremco Aremco-Bond™ 2320 High Performance Epoxide
| Category | Polymer , Adhesive , Thermoset , Epoxy , Epoxy Adhesive |
| Manufacturer | Aremco |
| Trade Name | Aremco-Bond™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aremco Aremco-Bond™ 2320 High Performance Epoxide.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Toughened, Unfilled, Fast-Setting, BPA Free, 2:1, High Peel & Shear Strength
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.10 g/cc | 1.10 g/cc | |
| Viscosity | 35000 cP | 35000 cP |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 78 | 78 | |
| Shear Strength | 33.09 MPa | 4800 psi | ASTM D1002-94 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 59.4 µm/m-°C | 33.0 µin/in-°F | |
| Maximum Service Temperature, Air | 121 °C | 250 °F | |
| Minimum Service Temperature, Air | -55.0 °C | -67.0 °F | |
| Shrinkage | 0.00100 % | 0.00100 % |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 2.00e+14 ohm-cm | 2.00e+14 ohm-cm | |
| Dielectric Strength | 43.3 kV/mm | 1100 kV/in |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 120 min @Temperature 93.3 °C |
2.00 hour @Temperature 200 °F |
alternate cure |
| 1440 - 2880 min @Temperature 79.4 °C |
24.0 - 48.0 hour @Temperature 175 °F |
recommended cure | |
| Pot Life | 60.0 min @Temperature 25.0 °C |
60.0 min @Temperature 77.0 °F |
100 gm mass |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Chemical Resistance | Good | |
| Color | Off-White | |
| Mix Ratio | 2:1 |
Users viewing this material also viewed the following:
- Polimeri Europa Riblene® GM 30 R Low Density Polyethylene - Coating Grade
- Materion Beryllium Copper Alloy 25 Rod and Bar; AT (TF00) Temper; over 76 mm (UNS C17200)
- DSM Arnitel® PM471 Polyether Ester Elastomer (European and Asian Grade)
- Fainplast Compounds CL 71 Flexible PVC, Sheathing
- Dow Corning Z-6042 SILANE
- China Tungsten ST2365 PM Antifriction Parts
- Cadi 100W Tungsten
- BASF Ultramid® B3EG10 BK00564 50% Glass Filled PA6 (Dry)
- PolyOne Elastamax XL-0257-2 TPU-Based Thermoplastic Elastomer (discontinued **)
Copyright © lookpolymers.com All Rights Reserved