- HOME
- POLYMER SEARCH
- Thermoplastic
- Polyphenylene Sulfide (PPS)
- Polyphenylene Sulfide (PPS), Unreinforced, Extruded
- Quadrant EPP Techtron® HPV PPS (ASTM Product Data Sheet)
Quadrant EPP Techtron® HPV PPS (ASTM Product Data Sheet)
| Category | Polymer , Thermoplastic , Polyphenylene Sulfide (PPS) , Polyphenylene Sulfide (PPS), Unreinforced, Extruded |
| Manufacturer | Quadrant Engineering Plastics Products |
| Trade Name | Techtron® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Quadrant EPP Techtron® HPV PPS (ASTM Product Data Sheet).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.43 g/cc | 1.43 g/cc | ASTM D792 |
| Water Absorption | 0.010 % | 0.010 % | Immersion, 24hr; ASTM D570(2) |
| Water Absorption at Saturation | 0.090 % | 0.090 % | Immersion; ASTM D570(2) |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell M | 84 | 84 | ASTM D785 |
| Tensile Strength | 75.2 MPa | 10900 psi | ASTM D638 |
| Elongation at Break | 4.0 % | 4.0 % | ASTM D638 |
| Tensile Modulus | 3.72 GPa | 540 ksi | ASTM D638 |
| Flexural Strength | 72.4 MPa | 10500 psi | ASTM D790 |
| Flexural Modulus | 3.69 GPa | 535 ksi | ASTM D790 |
| Compressive Strength | 107 MPa | 15500 psi | 10% Def.; ASTM D695 |
| Compressive Modulus | 2.36 GPa | 342 ksi | ASTM D695 |
| Izod Impact, Notched | 0.747 J/cm | 1.40 ft-lb/in | ASTM D256 Type A |
| Coefficient of Friction, Dynamic | 0.20 | 0.20 | Dry vs. Steel; QTM55007 |
| K (wear) Factor | 125 x 10-8 mm³/N-M | 62.0 x 10-10 in³-min/ft-lb-hr | QTM 55010 |
| Limiting Pressure Velocity | 0.307 MPa-m/sec | 8750 psi-ft/min | 4:1 safety factor; QTM 55007 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 59.4 µm/m-°C @Temperature -40.0 - 149 °C |
33.0 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
| Thermal Conductivity | 0.303 W/m-K | 2.10 BTU-in/hr-ft²-°F | ASTM F433 |
| Melting Point | 280 °C | 536 °F | Crystalline, Peak; ASTM D3418 |
| Maximum Service Temperature, Air | 221 °C | 430 °F | Long Term |
| Deflection Temperature at 1.8 MPa (264 psi) | 116 °C | 240 °F | ASTM D648 |
| Flammability, UL94 | V-0 | V-0 | 1/8 inch (Estimated Rating) |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Surface Resistivity per Square | >= 1.00e+13 ohm | >= 1.00e+13 ohm | EOS/ESD S11.11 |
| Dielectric Strength | 19.7 kV/mm | 500 kV/in | Short Term; ASTM D149 |
| Compliance Properties | Metric | English | Comments |
|---|---|---|---|
| 3A-Dairy | No | No | |
| Canada AG | No | No | |
| FDA | Yes | Yes | |
| NSF | No | No | |
| USDA | No | No | |
| USP Class VI | No | No |
| Chemical Resistance Properties | Metric | English | Comments |
|---|---|---|---|
| Acids, Strong (pH 1-3) | Limited | Limited | |
| Acids, Weak | Acceptable | Acceptable | |
| Alcohols | Acceptable | Acceptable | |
| Alkalies, Strong (pH 11-14) | Acceptable | Acceptable | |
| Alkalies, Weak | Acceptable | Acceptable | |
| Chlorinated Solvents | Acceptable | Acceptable | |
| Conductive / Static Dissipative | No | No | |
| Continuous Sunlight | Limited | Limited | |
| Hot Water / Steam | Acceptable | Acceptable | |
| Hydrocarbons - Aliphatic | Acceptable | Acceptable | |
| Hydrocarbons - Aromatic | Acceptable | Acceptable | |
| Inorganic Salt Solutions | Acceptable | Acceptable | |
| Ketones, Esters | Acceptable | Acceptable |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Machinability | 3 | 1-10, 1=Easier to Machine |
Users viewing this material also viewed the following:
- Northstar Polymers SBA-041 Polyester Curing Agent
- Termopol Termoton® K4GA4070A TPE Compound, based on SEBS and Polyolefins
- TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 90 PHR Iceberg Clay Filler
- Taiwan Sheen Soon Sheenthane® A8511H TPU for Ink
- SABIC Innovative Plastics LNP Thermocomp EF008E PEI
- Master Bond UV15FL One Component, High Strength, Flexible UV Curable Epoxy
- Eastman Eastar MN211 Copolyester, Natural
- Asahi Kasei Thermofil P-20TC-1628 20% Talc Filled, Heat Stabilized
- Axiall 38831 Coax & Telecom Flexible PVC
- Haynes 625 alloy, 50% cold reduction
Copyright © lookpolymers.com All Rights Reserved