- HOME
- POLYMER SEARCH
- Thermoset
- Epoxy
- Aremco Aremco-Bond™ 2210 High Performance Epoxide
Aremco Aremco-Bond™ 2210 High Performance Epoxide
| Category | Polymer , Adhesive , Thermoset , Epoxy |
| Manufacturer | Aremco |
| Trade Name | Aremco-Bond™ |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Aremco Aremco-Bond™ 2210 High Performance Epoxide.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Aluminum and Ceramic-Filled, Vibration and Impact Resistant, for Repairing Aluminum Mold and Wear Surfaces.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.18 g/cc | 1.18 g/cc |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 89 | 89 | |
| Flexural Strength | 97.2 MPa | 14100 psi | ASTM D790 |
| Shear Strength | 17.9 MPa | 2600 psi | ASTM D1002-94 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear | 27.0 µm/m-°C @Temperature 20.0 °C |
15.0 µin/in-°F @Temperature 68.0 °F |
|
| Thermal Conductivity | 1.59 W/m-K | 11.0 BTU-in/hr-ft²-°F | |
| Maximum Service Temperature, Air | 204 °C | 400 °F | |
| Minimum Service Temperature, Air | -55.0 °C | -67.0 °F | |
| Shrinkage | 0.50 % | 0.50 % | Cure Shrinkage |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+13 ohm-cm | 1.00e+13 ohm-cm | |
| Dielectric Constant | 6.5 @Frequency 1000 Hz |
6.5 @Frequency 1000 Hz |
|
| Dielectric Strength | 16.5 kV/mm | 420 kV/in | |
| Dissipation Factor | 0.090 | 0.090 |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | 120 min @Temperature 93.3 °C |
2.00 hour @Temperature 200 °F |
Alternate Cure |
| 1440 - 2880 min @Temperature 23.0 °C |
24.0 - 48.0 hour @Temperature 73.4 °F |
Recommended Cure | |
| Pot Life | 60.0 min @Temperature 25.0 °C |
60.0 min @Temperature 77.0 °F |
100 gm mass |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Chemical Resistance | Good | |
| Color | Gray | |
| Mix Ratio By Weight | 100:11 | resin:hardener |
| Viscosity | Paste |
Users viewing this material also viewed the following:
- NYCOA 2256 30% Glass Filled Nylon 6
- Permabond CSA-NF Cyanoacrylate Surface Activator
- Shuman SP930 White Polycarbonate
- A. Schulman POLYBATCH™ Opaque Blue 40356 Concentrate Based In LLDPE
- A. Schulman SCHULAMID® 66 MK30HI 30% Mineral Reinforced, Impact Modified Nylon 66
- Epoxyset Epoxiohm EO-21 Electrically Conductive Epoxy Adhesive
- Eurostar Staramide PF004EUC PA6, 20% Glass Filled, Injection Molded
- CMW® ELKONITE® 35S Silver Tungsten contact material ASTM B631, Class B, infiltrated
- Ascend Performance Materials Vydyne® R228 Nylon 66, 40% Mineral Reinforced, DAM
- Unifrax Fibermass® 2600 Ceramic Fiber Blocks
Copyright © lookpolymers.com All Rights Reserved