Advanced Polymer Alloys DuraGrip™ 6150 BK Melt Processable Elastomer

Category	Polymer , Thermoplastic , Elastomer, TPE , Thermoplastic Olefinic Elastomer (TPO)
Manufacturer	APA - Advanced Polymer Alloys
Trade Name	DuraGrip™
Port	Shanghai port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Advanced Polymer Alloys DuraGrip™ 6150 BK Melt Processable Elastomer.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

DuraGrip™ 6150BK is designed to be a special purpose Melt Processable Elastomer (MPE) that is easy to use in injection molding and extrusion processes. DGR 6150BK has an excellent soft touch feel and will Bond to Nylon, ABS, PC, PC/ABS. DuraGrip™ 6100 series is hygroscopic and requires drying prior to use.Information provided by Advanced Polymer Alloys

Physical Properties	Metric	English	Comments
Specific Gravity	1.06 g/cc	1.06 g/cc	ASTM D471; ISO 2781
Viscosity	327000 cP @Shear Rate 300 1/s, Temperature 190 °C	327000 cP @Shear Rate 300 1/s, Temperature 374 °F	ASTM D3835
Linear Mold Shrinkage	0.019 cm/cm	0.019 in/in
	0.021 cm/cm	0.021 in/in
Linear Mold Shrinkage, Transverse	0.00 cm/cm	0.00 in/in
	0.0040 cm/cm	0.0040 in/in

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	52	52	Time of 5 seconds; ASTM D2240; ISO 48
Tensile Strength, Ultimate	5.86 MPa	850 psi	ASTM D412; ISO 37
	6.857 MPa	994.5 psi	After 7 days at 70°C; ASTM D412 ISO 37
	8.6150 MPa	1249.5 psi	After 7 days at 100oC; ASTM D412 ISO 37
Elongation at Break	360 %	360 %	ASTM D412; ISO 37
	381.6 %	381.6 %	After 7 days at 70°C; ASTM D412 ISO 37
	417.6 %	417.6 %	After 7 days at 100°C; ASTM D412 ISO 37
Modulus of Elasticity	0.00170 GPa	0.247 ksi	After 7 days at 100°C; ASTM D412 ISO 37
	0.00181 GPa	0.263 ksi	After 7 days at 70°C; ASTM D412 ISO 37
100% Modulus	0.00179 GPa	0.260 ksi	ASTM D412; ISO 37
Graves Tear Strength	25.6 kN/m @Temperature 23.9 °C	146 pli @Temperature 75.0 °F	Die C; ASTM D624
Taber Abrasion, mg/1000 Cycles	144	144	Cs-17 Wheel, 1000 g Load; ASTM D3389
Compression Set	19 %	19 %	After 22 Hr at 75°F (24°C); ASTM D395; ISO 815
	76 % @Temperature 70.0 °C	76 % @Temperature 158 °F	22 hrs.; ASTM D395; ISO 815
	87 % @Temperature 100 °C	87 % @Temperature 212 °F	22 hrs.; ASTM D395; ISO 815
Tensile Set	3.4 %	3.4 %	100% Tension; ASTM D412

Thermal Properties	Metric	English	Comments
Brittleness Temperature	-67.8 °C	-90.0 °F	ASTM D746; ISO 812

Processing Properties	Metric	English	Comments
Processing Temperature	227 °C	440 °F
Rear Barrel Temperature	204 - 221 °C	400 - 430 °F
Middle Barrel Temperature	216 - 227 °C	420 - 440 °F
Front Barrel Temperature	227 - 238 °C	440 - 460 °F
Nozzle Temperature	227 - 249 °C	440 - 480 °F
Melt Temperature	227 - 254 °C	440 - 490 °F
Mold Temperature	43.3 - 54.4 °C	110 - 130 °F
Injection Pressure	1.03 - 3.45 MPa	150 - 500 psi
Cycle Time - Injection	0.50 - 2.0 sec	0.50 - 2.0 sec	boost
Screw Speed	25 - 100 rpm	25 - 100 rpm
Cure Time	0.167 - 0.333 min	0.00278 - 0.00556 hour	Cooling Time

Descriptive Properties	Value	Comments
Fluid Resistance - Volume Change, % (ASTM D471)	1	After 7 Days in Water at 212°F (100°C)
	16	After 7 Days in ASTM Oil No.1 at 212°F (100°C)
	47	After 7 Days in ASTM Ref. Fuel No. B at 75°F (24°C)
	95	After 7 Days in IRM 903 Oil No.3 at 212°F (100°C)

Users viewing this material also viewed the following: