Polymer Property : Dielectric Strength = 330 kV/in Product List

Electrical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Electrical Properties	Metric	English	Comments
Dielectric Strength	13.0 - 19.0 kV/mm	330 - 483 kV/in	ASTM D149
Polimersan Plastics POLITEF® (PTFE) with 25% Carbon As a result of Filled-In POLITEF® alloys, apart from all of its superior properties, POLITEF®, according to its usage areas has gained additional properties as described below:Electrical Conductiv..
Dielectric Strength	13.0 - 19.0 kV/mm	330 - 483 kV/in	ASTM D149
Polimersan Plastics POLITEF® (PTFE) with 25% Carbon As a result of Filled-In POLITEF® alloys, apart from all of its superior properties, POLITEF®, according to its usage areas has gained additional properties as described below:Electrical Conductiv..
Dielectric Strength	13.0 kV/mm	330 kV/in	ASTM D149
Premix Premi-Ject® 1102H Fiberglass Reinforced Thermoset BMC Premi-Ject® 1102H is a fiberglass reinforced thermoset bulk molding compound for coil encapsulation applications.Key features and benefits are:Designed with unique flow properties to encapsulate co..
Dielectric Strength	13.0 kV/mm	330 kV/in	ASTM D149
Chevron Phillips Ryton® R10 5002C PPS Polyphenylene Sulfide (discontinued **) Ryton® PPS is used in many electronic and automotive applications because of its high strength, favorable electrical properties, and high temperature stability.Data provided by the manufacturer.Sol..
Dielectric Strength	13.0 - 22.0 kV/mm	330 - 559 kV/in	Average value: 16.5 kV/mm Grade Count:6
Overview of materials for Polyphenylene Sulfide (PPS) with 30% Glass Fiber Filler This property data is a summary of similar materials in the MatWeb database for the category "Polyphenylene Sulfide (PPS) with 30% Glass Fiber Filler". Specific grades with glass content between 25%..
Dielectric Strength	13.0 kV/mm	330 kV/in	ASTM D149
Plenco 501 Black Electrical Grade Mineral/Flock Filled Phenolic Molding Compound (discontinued **) Plaslok 501 is a two-stage, mineral and flock-filled phenolic molding compound designed for use in heat resistant and electrical applications. It is designed for elevated temperature exposure for e..
Dielectric Strength	13.0 kV/mm	330 kV/in	200Â°C for 1,000 hrs
Fujipoly Industries SarconÂ® 45Q Thin-Film QR Sarcon QR is Fujipolys originally developed High Heat Conductive/Low Hardness Silicone Rubber. Fine, high heat conductive ceramic particles are mixed with insulative silicone rubber.Information prov..
Dielectric Strength	13.0 kV/mm	330 kV/in	200Â°C for 1,000 hrs
Fujipoly Industries SarconÂ® 45U Thin-Film UR Sarcon UR is Fujipolys originally developed High Heat Conductive/Low Hardness Silicone Rubber. Fine, high heat conductive ceramic particles are mixed with insulative silicone rubber.Information prov..
Dielectric Strength	13.0 kV/mm	330 kV/in	60Â°C for 500 hrs with 95% RH
Fujipoly Industries SarconÂ® 45U Thin-Film UR Sarcon UR is Fujipolys originally developed High Heat Conductive/Low Hardness Silicone Rubber. Fine, high heat conductive ceramic particles are mixed with insulative silicone rubber.Information prov..
Dielectric Strength	13.0 kV/mm	330 kV/in	JIS-K-6249; ASTM D-149
Fujipoly Industries SarconÂ® GR-L Gap Filler Pad Sarcon GR-L is a highly formable, thermally conductive gel material (no electicity conductive) in a versatile sheet form that easily fits and adheres to most all shapes and sizes of components, and ..
Dielectric Strength	13.0 kV/mm	330 kV/in	Short Time; ASTM D149
Plenco 1586 Polyester, Pellet, Injection Molded PLENCO 01586 is a glass and mineral reinforced pelletized polyester molding compound offering excellent heat resistance and mechanical strength properties. This product is typically used for injecti..
Dielectric Strength	13.0 kV/mm	330 kV/in
Elastomer Engineering Elastamide 200 Elastomer Modified RIM Nylon 6 26% crystallinity. Information supplied by Elastomer Engineering.
Dielectric Strength	13.0 kV/mm	330 kV/in
Elastomer Engineering Elastamide 300 Elastomer Modified RIM Nylon 6 22% crystallinity. Information supplied by Elastomer Engineering.
Dielectric Strength	13.0 kV/mm @Thickness 2.00 mm	330 kV/in @Thickness 0.0787 in	ASTM D149
Toyobo T-661 Nylon 66, Standard Grade (Conditioned) Features: Non-reinforced, Standard GradeInformation provided by Toyobo.
Dielectric Strength	13.0 kV/mm	330 kV/in	ASTM D149-95a
Thermoseal KLINGERSIL® C-4324 Compressed Inorganic Fiber Gasketing Recycled Fiberglass & Aramid BlendNitrile BinderLow Pressure Steam, Water & GasesGood for Oils and FuelsInformation provided by Thermoseal Inc.
Dielectric Strength	13.0 kV/mm	330 kV/in
Dow Corning SE 4440 LP KIT Two-part, grey, 1:1, addition cure gel, good thermal conductivity, low viscosity.Information provided by Dow Corning
Dielectric Strength	13.0 kV/mm	330 kV/in	ASTM D149
Covestro Baydur® 726 IBS Polyurethane Structural Foam RIM, Density 40 pcf, MDI-based 2-Component Liquid System 0.25 in. thickness. IBS = Interactive Blowing System RIM = Reaction Injection MoldingInformation provided by Bayer Corporation, Polyurethanes DivisionAs of 1 September 2015, Bayer MaterialScience ..
Dielectric Strength	13.0 kV/mm	330 kV/in	DIN 53481
DSM Fibre Intermediates Nyrim® 2000 (Conditioned) Conditioned at 23°C and 50% Relative Humidity.Nyrim is a Block Copolymer of Nylon 6 and an elastomer with exceptional properties in impact resistance, fatigue and abrasion resistance. Nyrim is proc..
Dielectric Strength	13.0 kV/mm @Thickness 1.00 mm	330 kV/in @Thickness 0.0394 in	IEC 60243
Ascend Performance Materials Vydyne® ECO-315 Nylon 66/6, non-halogenated, ignition resistant, DAM Vydyne® ECO315 is non-halogenated, unfilled, flame-retardant PA66/6 copolymer with excellent strength and toughness. It is lubricated for machine feed and has an Underwriters Laboratories UL 94 fla..
Dielectric Strength	13.0 kV/mm	330 kV/in	Short Time
Bulk Molding Compounds BMC 600 Mineral Filled, Glass Fiber Reinforced Polyester Compound BMC 600 molding compound is a mineral filled glass-fiber-reinforced polyester compound suitable for compression, transfer and stuffer injection molding. It is a general purpose material with medium ..
Dielectric Strength	13.0 kV/mm	330 kV/in	Short Time
Bulk Molding Compounds BMC 600LS Mineral Filled, Glass Fiber Reinforced Polyester Compound BMC 600LS molding compound is a low-shrink, Mineral filled, glass-fiber-reinforced polyester compound suitable for compression, transfer and stuffer injection molding It is a general purpose materia..
Dielectric Strength	13.0 - 100 kV/mm	330 - 2540 kV/in	Average value: 28.4 kV/mm Grade Count:20
Overview of materials for Nylon 6, Extruded This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, Extruded". Each property range of values reported is minimum and maximum values of appropriate ..
Dielectric Strength	13.0 kV/mm @Thickness 2.00 mm	330 kV/in @Thickness 0.0787 in	IEC 243-1
LATI LARTON G/50 50% Glass Fiber Filled Polyphenylene sulfide (PPS) (discontinued **) Description: Larton thermoplastics are polyphenylene sulfide (PPS) products. They are distinguished by a group of very interesting properties combined with easy moldability. Larton parts feature: ex..
Dielectric Strength	13.0 kV/mm	330 kV/in	ASTM D149
Gharda Chemicals Gafone™ B2300 Polysupersulfone (PSS) (discontinued **) Characteristics: Excellent Dimensional properties Transparent Improved Impact Strength and Toughness as compared to PES Excellent Hydorlytic Stability High Stress Cracking Resistance Good Chemical..
Dielectric Strength	13.0 kV/mm	330 kV/in	Wet, Step by Step
Cosmic Plastics D33 Short Glass Fiber Filled Ortho Diallyl Phthalate Molding Compound Data provided by the manufacturer.