POLYMER SEARCH

Plenco 1586 Polyester, Pellet, Injection Molded

Category	Polymer , Thermoset , Filled/Reinforced Thermoset , Polyester, TS , Thermoset Polyester Glass and Mineral Filled BMC
Manufacturer	Plenco (Plastics Engineering Company)
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Plenco 1586 Polyester, Pellet, Injection Molded.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

PLENCO 01586 is a glass and mineral reinforced pelletized polyester molding compound offering excellent heat resistance and mechanical strength properties. This product is typically used for injection molded electrical appliance components. UL recognized under component file E40654. 01586 is available in white.Information supplied by Plenco.

Physical Properties	Metric	English	Comments
Bulk Density	0.890 g/cc	0.0322 lb/in³	ASTM D1895
Density	1.89 g/cc	0.0683 lb/in³	ASTM D792
Water Absorption	0.059 %	0.059 %	ASTM D570
Linear Mold Shrinkage	0.0037 cm/cm	0.0037 in/in	ASTM D955

Mechanical Properties	Metric	English	Comments
Hardness, Rockwell E	54	54	ASTM D785
Tensile Strength, Ultimate	64.0 MPa	9280 psi	ASTM D638
Elongation at Break	1.09 %	1.09 %	ASTM D638
Tensile Modulus	11.7 GPa	1700 ksi	ASTM D638
Flexural Strength	101 MPa	14600 psi	ASTM D790
Flexural Modulus	10.2 GPa	1480 ksi	ASTM D790
Compressive Strength	119 MPa	17300 psi	ASTM D695
Poissons Ratio	0.32	0.32	ASTM D638
Shear Modulus	4.43 GPa	643 ksi	Calculated
Izod Impact, Notched	0.410 J/cm	0.768 ft-lb/in	ASTM D256
Charpy Impact, Notched	0.350 J/cm²	1.67 ft-lb/in²	ASTM D256
Impact	289	289	J/m Drop Ball Impact; PLENCO

Thermal Properties	Metric	English	Comments
CTE, linear	86.0 µm/m-°C @Temperature 40.0 - 130 °C	47.8 µin/in-°F @Temperature 104 - 266 °F	TMA; ASTM E831
Thermal Conductivity	0.870 W/m-K @Temperature 100 °C	6.04 BTU-in/hr-ft²-°F @Temperature 212 °F	ASTM E1461
Maximum Service Temperature, Air	217 °C	423 °F	Heat Resistance; ASTM D570D
Deflection Temperature at 1.8 MPa (264 psi)	252 °C	486 °F	ASTM D648
Flammability, UL94	V-0 @Thickness 1.00 mm	V-0 @Thickness 0.0394 in
Oxygen Index	41 %	41 %	ASTM D2863
Shrinkage	0.0072 %	0.0072 %	72 hr, 120ºC; ASTM D1299

Electrical Properties	Metric	English	Comments
Volume Resistivity	1.80e+15 ohm-cm	1.80e+15 ohm-cm	ASTM D247
Dielectric Constant	4.4	4.4	ASTM D150
Dielectric Strength	11.1 kV/mm	282 kV/in	Step by Step; ASTM D149
	13.0 kV/mm	330 kV/in	Short Time; ASTM D149
Dielectric Breakdown	23000 V	23000 V	1hr 120C; ASTM D149
Dissipation Factor	0.0173	0.0173	ASTM D150
Arc Resistance	189 sec	189 sec	ASTM D495
Comparative Tracking Index	600 V	600 V	ASTM D3638

Users viewing this material also viewed the following: