Processing Properties | Metric | English | Comments |
---|---|---|---|
Cure Time | 4320 min @Temperature 25.0 °C |
72.0 hour @Temperature 77.0 °F |
Recommended Cure |
Parker Chomerics Tecknit® 72-00005 Silver-Filled Flexible Resin Caulking System Description: TECKNIT standard electrically conductive caulks consist of four one-component resin systems filled with silver plated glass or copper particles. These systems are formulated to provide .. |
|||
Cure Time | 4320 min @Temperature 25.0 °C |
72.0 hour @Temperature 77.0 °F |
50%; Full Cure |
Parker Chomerics Tecknit CON/RTV-I One Part: Silver-Filled Silicone RTV Description: TECKNIT CON/RTV-I system is a pure silver loaded, one component RTV silicone adhesive sealant. It is ready to use without mixing and cures quickly at room temperature on exposure to moi.. |
|||
Cure Time | 4320 - 5760 min @Temperature 25.0 °C |
72.0 - 96.0 hour @Temperature 77.0 °F |
Complete Cure Cycle |
Northstar Polymers MPA-A30B Mold-Making Resin MPA-A30B is a room-temperature-cure liquid castable polyurethane system. This ether-base polyurethane system is used in applications such as mold-making, prototyping, production of cast parts, pott.. |
|||
Cure Time | 4320 min @Temperature 23.0 °C |
72.0 hour @Temperature 73.4 °F |
Aluminum, working strength |
Permabond HH190 Anaerobic Gasketmaker Permabond® HH190 Gasketmaker is an anaerobic curing flange sealant that can replace, or be used as a dressing for, conventional pre-cut gaskets. Since HH190 is a flowable paste, it conforms to the .. |
|||
Cure Time | 4320 min @Temperature 23.0 °C |
72.0 hour @Temperature 73.4 °F |
M10 steel, full strength |
Permabond LH050 Anaerobic Threadsealant Permabond® LH050 pipe sealant with PTFE is a general purpose pipe sealant that provides instant air pressure seal up to 1000 psi with limited hand tightening. After cure, the sealing capability is .. |
|||
Cure Time | 4320 min @Temperature 23.0 °C |
72.0 hour @Temperature 73.4 °F |
M10 steel, full strength |
Permabond LH050P Pure Anaerobic Threadsealant PERMABOND® LH050 PURE anaerobic pipe sealant is single component paste that cures only when in contact with metal parts and oxygen is excluded. The sealant fills up the entire space between male an.. |
|||
Cure Time | 4320 min @Temperature 23.0 °C |
72.0 hour @Temperature 73.4 °F |
M10 steel, full strength |
Permabond LM113 Anaerobic Threadlocker Permabond® LM113 Threadlocker is a medium viscosity product for locking small threaded fasteners, such as screws and bolts or hydraulic fittings that might require disassembly. Due to its thixotrop.. |
|||
Cure Time | 4320 - 5760 min @Temperature 25.0 °C |
72.0 - 96.0 hour @Temperature 77.0 °F |
Complete Cure Cycle |
Northstar Polymers SAI-1 Low Viscosity Variable Ratio Polyurethane Gel SAI-1 is custom formulated polyurethane gel material to yield very soft elastomer gel material from low viscosity components at room temperature. This material is variable mixing ratio so that the .. |
|||
Cure Time | 4320 - 5760 min @Temperature 25.0 °C |
72.0 - 96.0 hour @Temperature 77.0 °F |
Full |
Lord Adhesives Thermosetâ„¢ UR-329 Two Component Urethane Potting Compound Lord UR-329 is a flexible, two-component, room temperature curing, urethane, encapsulating compound. UR-329 maintains low hardness and modulus over a wide temperature range, which imparts minimal st.. |
|||
Cure Time | >= 4320 min @Temperature 25.0 °C |
>= 72.0 hour @Temperature 77.0 °F |
|
Lord Adhesives HPC-3B Fluoroelastomer Coating LORD HPC-3B and HPC-3C are two-part, room temperature curing fluoroelastomer coatings which feature robust adhesion and exceptional mechanical properties. These coatings greatly enhance fuel and flu.. |
|||
Cure Time | 4320 min @Temperature 25.0 °C |
72.0 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Bond FDA16 Food and Drug Application Epoxy Adhesive TRA-BOND FDA-16 EPOXY ADHESIVE is a medium viscosity epoxy resin system specifically developed for medical device applications. It has been tested in accordance with USP biological reactivity tests,.. |
|||
Cure Time | 4320 min @Temperature 25.0 °C |
72.0 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Bond FDA25 Food and Drug Application Epoxy Adhesive TRA-BOND FDA-25 is a medium viscosity epoxy resin system specifically developed for bonding and coating applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug Admi.. |
|||
Cure Time | 4320 min @Temperature 25.0 °C |
72.0 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Bond FS152C Clear Low Viscosity Epoxy Adhesive TRA-BOND FS152C is a low viscosity epoxy system containing no solvents, cures at room temperature and has excellent flow and wetting characteristics. This two-part adhesive mixes easily and develops.. |
|||
Cure Time | 4320 min @Temperature 25.0 °C |
72.0 hour @Temperature 77.0 °F |
|
Tra-Con Tra-Bond FDA12WH01 Food and Drug Application Epoxy Adhesive TRA-BOND FDA12 WH01 is a medium viscosity epoxy resin system specifically developed for bonding and coating applications in accordance with Title 21, U.S. Code of Federal Regulations, Food and Drug .. |
|||
Cure Time | 4320 min @Temperature 16.0 °C |
72.0 hour @Temperature 60.8 °F |
Full Chemical |
Chesterton ARC 10 Paste grade machinable composite Description: A reinforced composite for the repair and protection of metal surfaces. It is machinable with excellent compressive strength, chemical resistance and corrosion resistance. It is non-sag.. |
|||
Cure Time | 4320 min @Temperature 16.0 °C |
72.0 hour @Temperature 60.8 °F |
Full Chemical |
Chesterton ARC 890 Course Grade Sliding Wear Compound An advanced ceramic composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is normally applied at the thickness of 6 mm (1/4”).. |
|||
Cure Time | 4320 min @Temperature 16.0 °C |
72.0 hour @Temperature 60.8 °F |
Full Chemical |
Chesterton ARC 897 Fine Grade Sliding Wear Compound Description: ARC 897 is an advanced ceramic reinforced composite for the repair and protection of all metal surfaces subjected to severe erosion, corrosion, and chemical attack. It is applied at a t.. |
|||
Cure Time | 4320 min @Temperature 10.0 °C |
72.0 hour @Temperature 50.0 °F |
Full Load |
Chesterton ARC S1 General purpose coating Description: An advanced polymer composite formulated to protect metal surfaces from corrosion and chmical attack. It is normally applied at a thickness of 250 microns (10 mils) per coat. Non-shrink.. |
|||
Cure Time | 4320 - 7200 min @Temperature 25.0 °C |
72.0 - 120 hour @Temperature 77.0 °F |
|
Cytec (Conap) FR-1050 Conapoxy® Resin / Conacure® Hardener Epoxy Potting and Encapsulating Systems for Electronic ApplicationsHigh technology epoxy resin systems for potting and encapsulation, for the defense, aerospace, electronics, computer, automotive an.. |
|||
Cure Time | 4320 min @Temperature 23.0 °C |
72.0 hour @Temperature 73.4 °F |
|
Epoxy Technology EPO-TEK® 301-2FL Low Stress, Optical Epoxy Product Description: EPO-TEK® 301-2FL is a two component optical, medical, and semiconductor grade epoxy resin. It is a more flexible version of EPO-TEK® 301-2.Advantages & Application Notes: Sug.. |
|||
Cure Time | 4320 min @Temperature 23.0 °C |
72.0 hour @Temperature 73.4 °F |
Minimum Bond Line |
Epoxy Technology EPO-TEK® E4110 Electrically Conductive, Silver Epoxy Product Description: EPO-TEK® E4110 is an electrically conductive, silver-filled epoxy paste. This two component system is designed for low temperature curing from ambient to 80°C, although other.. |
|||
Cure Time | 4320 min @Temperature 23.0 °C |
72.0 hour @Temperature 73.4 °F |
|
Epoxy Technology EPO-TEK® EJ2189 Electrically Conductive Epoxy Product Description: EPO-TEK® EJ2189 is an electrically conductive, silver-filled epoxy paste. This two component system is designed for low temperature curing from ambient to 80°C, although othe.. |
|||
Cure Time | 4320 min @Temperature 23.0 °C |
72.0 hour @Temperature 73.4 °F |
|
Epoxy Technology EPO-TEK® EJ2189-LV Electrically Conductive Epoxy Low Viscosity, two component room temp curing conductive epoxyInformation Provided by Epoxy Technology |
|||
Cure Time | 4320 min @Temperature 16.0 °C |
72.0 hour @Temperature 60.8 °F |
Full Chemical |
Chesterton MRS 10 Metal Rebuilding System Description: A reinforced composite for the repair and protection of metal surfaces. It is machinable with excellent compressive strength, chemical resistance It is non-sagging, non-shrinking and 10.. |
|||
Cure Time | 4320 min @Temperature 32.0 °C |
72.0 hour @Temperature 89.6 °F |
Full Chemical |
Chesterton ARC S1HB Sprayable high-viscosity, 100% solids, advanced coating An advanced composite formulated to protect concrete and metal surfaces from corrosion and chemical attack. It is normally applied at a thickness of 1-2 mm (40-80 mils) per coat. However, greater si.. |