Thermal Properties | Metric | English | Comments |
---|---|---|---|
Maximum Service Temperature, Air | 135 °C | 275 °F | |
Resinlab® CYNERGY CA6907 Adhesive Description: The CYNERGY 6900 SERIES are for use in demanding applications where very fast cure speeds and high temperature resistance are required. These are single component solvent free materials.. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | short period, no load |
Omnia Plastica PC Polycarbonate This amorphous polymer is commonly used for its high shock resistance even at low temperature. It is not a material recommended for mechanical applications, even if its dimensional stability does ma.. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | |
NextGen Adhesives M907-19 Medical Grade Epoxy Adhesive Description: NGAC M907-19 is a medium viscosity and thixotropic adhesive system that is specifically formulated for medical device assembly applications.Advantages and Applications: Uses include lam.. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | 20,000 h; IEC 60216/T1 |
Raschig Group MELOPLAS® 181.5 MF Cellulose-reinforced, phenol-modified MF molding compound (MPF) in white and colored shades. Very good electrical properties, high surface hardness, good mechanical strength, high UV and heat resis.. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | 20,000 h; IEC 60216/T1 |
Raschig Group MELOPLAS® 182 MF Wood flour-reinforced and inorganically filled, phenol-modified MF molding compound (MPF) in dark colors. Improved dimensional stability and electrical properties as compared with MP 180, high surf.. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | Continuous (GTP 50% Tensile); IEC 60216 |
PolyOne Bergadur™ PB40 G15 UF UV Polybutylene Terephthalate (PBT) Information provided by PolyOne |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | Continuous temperature Rating, 1000 hours |
Advanced Elastomer Systems Santoprene® 253-50 Thermoplastic Rubber
(discontinued **) A colorable thermoplastic flame retardant elastomer with good fluid resistance, formulated to replace thermoset elastomers such as EPDM, polychloroprene, and chlorosulfonated polyethylene. It can b.. |
|||
Maximum Service Temperature, Air | 135 - 250 °C | 275 - 482 °F | Average value: 186 °C Grade Count:6 |
Overview of materials for Nylon 66, 60% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 66, 60% Glass Fiber Filled". Specific grades with glass content between 55% and 64% are included. .. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | |
Lehmann & Voss LUVOCOM® 21-7928 Polyamide 6/6T, with carbon fiber, lubricant modified Applications: Automotive industry, textile- and office machinery, apparatus- and precision engineering.Strong, stiff parts.Dynamic stressed parts at high movement velocity.Improved friction and wear.. |
|||
Maximum Service Temperature, Air | 135 °C @Pressure 1.21 MPa |
275 °F @Pressure 175 psi |
|
Garlock 98206 EPDM Sheet Rubber Gasketing Ethylene propylene diene monomer (EPDM)Certified to NSF/ANSI 61.Information provided by Garlock Rubber Technologies |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | |
Henkel Frekote 700-NC Mold Release Agent A non-CFC, semi permanent, multiple release polymer resin that effectively releases all thermoset resins. Versatile agent that provides slip where mold geometry problems are encountered. Cures at r.. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | |
Tra-Con Tra-Bond 2123 Metal Repair Steel/Epoxy Adhesive TRA-BOND 2123 is a versatile steel metal/epoxy adhesive formulation developed for modern industrial repair, casting and bonding applications where a steel-like or cast iron finish is required. This .. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | |
Loctite® SpeedBonder™ 324 High Impact Acrylic Bonding Adhesive Acrylic Bonding AdhesivesLoctite® Acrylic Adhesives were developed for bonding applications that require tensile, shear and peel strength combined with maximum impact, stress and shock resistance. .. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | See Note 2. |
ChevronTexaco Marfak® Heavy Duty 3 Texaco Marfak grease delivers value through:Good film strengthGood rust and corrosion protection, even in wet conditions.Texaco Marfak greases are fibrous sodium soap greases. It resists oil separat.. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | |
ExxonMobil Santoprene® 121-58W175 Thermoplastic Elastomer A soft, black, UV resistant thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance, and is designed for .. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | |
ExxonMobil Santoprene® 121-67W175 Thermoplastic Elastomer A soft, black, UV resistant thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance, and is designed for .. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | 1008 hr |
ExxonMobil Santoprene® 201-64 Thermoplastic Elastomer A soft, colorable, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide ra.. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | |
ExxonMobil Santoprene® 201-73 Thermoplastic Elastomer A soft, colorable, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide ra.. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | few hours; VDE 0304/P2-1, IEC 216 |
EPICHEM Epilon FR-PC V0 Polycarbonate Characteristics: self-extinguishing V0 at 1,6 mm |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | for 50% loss of tensile strength after 20,000 hr |
BASF Ultramid® B3EG6 BK00564 30% Glass Filled PA6 (Conditioned) Ultramid B3EG6 BK00564 is a 30% glass fiber reinforced, pigmented black injection molding PA6 grade. It conforms to FDA requirements of 21 CFR 177.1500. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | for 50% loss of tensile strength after 20000hr |
BASF Ultramid® B3EG7 35% Glass Filled PA6 (Dry) Description: 35% Glass fiber reinforced injection molding grade for industrial articles and electrical insulating parts.Information provided by BASF |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | for 50% loss of tensile strength after 20000hr |
BASF Ultramid® B3EG7 BK 00564 35% Glass Filled PA6 (Dry) Description: 35% Glass fiber reinforced injection molding grade for industrial articles and electrical insulating parts.Information provided by BASF |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | for 50% loss of tensile strength after 20000hr |
BASF Ultramid® KR 4355 G7 BK 00564 35% Glass Filled PA6/6T (Conditioned) Description: 35% glass-fiber reinforced product for injection-molding; high toughness, strength and stiffness, low water absorption, high melting point (295°C [563°F]). The mechanical properties r.. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | |
3M Scotch® FP-301VW Heat Shrink Tubing Scotch® Heat Shrink Tubing FP-301VW has the same outstanding balance of electrical, physical and chemical properties as FP-301 tubing, and is specially engineered for excellent flame resistance. FP.. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | |
ExxonMobil Santoprene® 211-55 Thermoplastic Elastomer
(discontinued **) A soft, colorable, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide ra.. |
|||
Maximum Service Temperature, Air | 135 - 190 °C | 275 - 374 °F | Average value: 150 °C Grade Count:22 |
Overview of materials for Melamine-Phenolic Copolymer This property data is a summary of similar materials in the MatWeb database for the category "Melamine-Phenolic Copolymer". Each property range of values reported is minimum and maximum values of ap.. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | |
LATI Later 4E61 GCER/450-V0 PBT, Glass/Mineral Filled, Flame Retardant Polybutylene Terephthalate (PBT) based compound. Toughened. Glass fibers / Mineral filler. UL94 V-0 classified, with brominated flame retardants, PBB/PBDE free. Very good electrical properties.Avail.. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | |
LATI Latilon 28D G/30 PC, 30% Glass Fiber Reinforced Polycarbonate (PC) based compound. Glass fibers. Low smoke density and low toxicity index. High dimensional stability.Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North A.. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | |
ExxonMobil Santoprene® 211-87 Thermoplastic Elastomer
(discontinued **) A hard, colorable, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide ra.. |
|||
Maximum Service Temperature, Air | 135 °C | 275 °F | |
ExxonMobil Santoprene® 101-87 Thermoplastic Elastomer A hard, black, versatile thermoplastic vulcanizate (TPV) in the thermoplastic elastomer (TPE) family. This material combines good physical properties and chemical resistance for use in a wide range .. |