- HOME
- POLYMER SEARCH
- Polymer Property : Flash Point = 302 °F
Polymer Property : Flash Point = 302 °F Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Flash Point | >= 150 °C | >= 302 °F | Ignition |
| M Chemical GUARD DOGâ„¢ UV123 HALS Light Stabilizer GUARD DOGâ„¢ UV123 hindered amine light stabilizer is highly effective in protecting polymers against degradation caused by exposure to UV radiation.Applications: GUARD DOGâ„¢ UV123 is mainly.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | Ignition |
| M Chemical GUARD DOGâ„¢ UV292 HALS Light Stabilizer GUARD DOGâ„¢ UV292 is a highly effective hindered amine light stabilizer that protects polymers against degradation caused by exposure to UV radiation.Applications: This UV stabilizer is mainly .. |
|||
| Flash Point | >= 150 °C | >= 302 °F | Ignition |
| M Chemical GUARD DOGâ„¢ UV770 HALS Light Stabilizer GUARD DOGâ„¢ UV770 unhindered amine light stabilizer is a highly effective radical scavenger that protects polymers against degradation caused by exposure to UV radiation.Applications: Extremely.. |
|||
| Flash Point | 150 °C | 302 °F | ASTM D92 |
| ExxonMobil 275 NC Mobiltac Mobiltac 375 NC, 325 NC and 275 NC extra high performance non-leaded, diluent-type, heavy-bodied open gear lubricants designed for a wide variety of open gear and mining applications. They contain a.. |
|||
| Flash Point | 150 °C | 302 °F | |
| ChevronTexaco Inhibited Transformer Oil Texaco Transformer Oil and Texaco Transformer Oil Inhibited deliver value through:Prolonged transformer life — Excellent conductive heat transfer properties improve cooling of transformer component.. |
|||
| Flash Point | 150 °C | 302 °F | ASTM D92 |
| ChevronTexaco Mechanism LPS® ISO 15 Hydraulic Oil Chevron Mechanism LPS Hydraulic Oils are highly refined, paraffinic oils containing oxidation and rust inhibitors, and special antiwear additives to extend the life of hydraulic pumps and motor part.. |
|||
| Flash Point | 150 °C | 302 °F | ASTM D92 |
| ExxonMobil 275 NC Mobiltac Mobiltac 375 NC, 325 NC and 275 NC extra high performance non-leaded, diluent-type, heavy-bodied open gear lubricants designed for a wide variety of open gear and mining applications. They contain a.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | |
| Dow BETAMATE™ 1045 Epoxy BETAMATE™ 1045 is a one component, epoxy based adhesive especially developed for the body shop. The product has the following properties: Good rheology performance (Wash-out resistant, excellent.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | |
| Dow BETAMATE™ 1496 V Epoxy BETAMATE™ 1496 V is a one component, epoxy based adhesive especially developed for the body shop. The product has the following properties: Good rheology performance (Wash-out resistant, excelle.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | |
| Dow BETAMATE™ XW 1044-3 Epoxy BETAMATE™ XW 1044-3 is a one component, epoxy based adhesive especially developed for the body shop. The adhesive can be applied by robot systems and it shows high adhesion to metal and non-metal .. |
|||
| Flash Point | 150 °C | 302 °F | |
| Duratherm 450 Paraffinic Heat Transfer Fluid Duratherm 450 - thermal fluid specifically engineered for applications requiring process heating and cooling efficiently between 30°F and 450°F. Economical and thermally stable, Duratherm 450 offe.. |
|||
| Flash Point | 150 °C | 302 °F | |
| BASF Ethylene Carbonate S Formula: C3H4O3CAS: 96-49-1Description: Ethylene carbonate is a colorless to yellow solid, with a fruity odor. It is fully soluble in water.Synonyms: EC, 1,3-Dioxolan-2-oneApplications: Intermediat.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
| Aptek 2100-A/B Urethane Encapsulant and/or Potting Compound General purpose encapsulant and potting compound. Outstanding hydrolytic stability. Excellent adhesion to components/circuit boards. Low modulus, low stress. Field proven for military and space appl.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | A Component; ASTM D92 |
| Aptek 2100-A7C/B Low modulus urethane staking compound APTEK 2100-A7C/B is a thixotropic, two component, electrically insulating, low modulus urethane system designed for the staking of electrical/electronic components to printed circuit boards. Althoug.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
| Aptek 2100-A7C/B Low modulus urethane staking compound APTEK 2100-A7C/B is a thixotropic, two component, electrically insulating, low modulus urethane system designed for the staking of electrical/electronic components to printed circuit boards. Althoug.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | A Component; ASTM D92 |
| Aptek 2210A/B Electrically conductive urethane adhesive Electrically conductive urethane adhesive, silver-filled, flexible low modulus, low outgassingAPTEK 2210-A/B is a two component, silver-filled, urethane adhesive designed for application where flexi.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
| Aptek 2503R-A/B Premeasured conformal urethane coating repair kit APTEK 2503-A/B is an unfilled, two component, electrically insulating, transparent, flexible urethane coating system designed for the encapsulation and protection of electrical/electronic components.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | A Component; ASTM D92 |
| Aptek 2710A/B Low modulus silicone adhesive Low modulus silicone adhesive; -110ºC to 260ºC operating range; Low outgassing/space grade; Electrostatically Discharging (ESD)APTEK 2710-A/B is a two component, black, low modulus, thixotropic, s.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | A Component; ASTM D92 |
| Aptek 2712-A/B Very low stress silicone adhesive Very low stress silicone adhesive; -110ºC to 260ºC operating range; Low outgassing/space gradeAPTEK 2712-A/B is a two component, white, very soft, thixotropic, electrically insulative, silicone ad.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
| Aptek 6100-1A/B Epoxy Encapsulant Optoelectronic grade, water clear encapsulant for IR and visible LED discreet devices. Lower Tg versions available for display devices.Part A is dark blue. Part B is clear to pale yellow.Information.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
| Aptek 6103-A/B Epoxy Encapsulant Optoelectronic grade, reddish black encapsulant for IR LED discreets. Transparent to IR light while blocking out visible light.Part A is deep red. Part B is clear to pale yellow.Information provided.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | B Component; ASTM D92 |
| Aptek 6109-A/B Epoxy Encapsulant Optoelectronic grade flexible water clear encapsulant. Higher viscosity/lower Tg version for clear blob-top encapsulation of ceramic substrate devicesPart A is blue. Part B is clear to pale yellow.I.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | ASTM D92 |
| Aptek 6500-PMF Electrically conductive epoxy adhesive High purity, low outgassing, electrically conductive adhesiveAPTEK 6500-PMF is a one component, pre-mixed frozen, 100% solid, silver-filled epoxy adhesive specifically designed for microelectronic d.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | ASTM D92 |
| Aptek 6505PMF Electronic-grade, non-conductive adhesive APTEK 6506-PMF is a one component, 100% solid, mineral-filled epoxy adhesive specifically designed for the attachment of electronic components to printed circuit boards as well as a protective barri.. |
|||
| Flash Point | >= 150 °C | >= 302 °F | ASTM D92 |
| Aptek 6512-PMF Electronic grade, conductive epoxy adhesive APTEK 6512-PMF is a one component, 100% solid, silver-filled, electrically conductive epoxy adhesive specifically designed for the attachment of electronic components to printed circuit boards. APT.. |
|||
Copyright © lookpolymers.com All Rights Reserved