Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ISO 527 |
LATI LASTANE 50 G/25 25% Glass Fiber Reinforced Polyurethane (PUR)
(Unverified Data**) Description: Lastane thermoplastics are polyurethane (PUR) products. They exhibit good wear and impact resistance, even at low temperatures, noise inertness and excellent mould release. These proper.. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ISO 527 |
LATI LATAN 23 Polyoxymethylene Copolymer (POM)
(discontinued **) Description: Latan series thermoplastics are polyoxymethylene copolymer (POM) products. The main applications for Latan feature good wear resistance, chemical inertness and low water absorption (gea.. |
|||
Tensile Strength, Ultimate | 60.0 - 74.0 MPa | 8700 - 10700 psi | Average value: 68.0 MPa Grade Count:24 |
Overview of materials for Polycarbonate, Extruded This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate, Extruded". Each property range of values reported is minimum and maximum values of approp.. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM data at 5 mm/min. |
BASF Capron® 8202C HS Nylon 6 (Conditioned)
(discontinued **) Capron 8202C HS is a heat stabilized, low viscosity, polyamide 6 injection molding homopolymer possessing a modified crystalline structure for increased property performance and faster cycles. It i.. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM D638 |
LG Chemical Lupoy 3010-10 Polycarbonate Resin Description: LUPOY PC 3010-10 resin is designed for injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.Main Character.. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM D638 |
LG Chemical Lupoy 3030-10 Polycarbonate Resin Description: LUPOY PC 3030-10 resin is designed for injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.Main Character.. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM D638 |
LG Chemical Lupoy 3030-15 Polycarbonate Resin Description: LUPOY PC 3030-15 resin is designed for injection molding products. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.Main Character.. |
|||
Tensile Strength, Ultimate | 60.0 MPa @Temperature 22.0 °C |
8700 psi @Temperature 71.6 °F |
25mm flat samples, compression moulded; ISO 527-4 |
Menzolit Menzolit® SMC 0200 Unsaturated Polyester UP SMC 0200 is a general purpose SMC for a wide range of applications. Typically, it is used as housings, covers and functional components in mechanical engineering. The flammability meets the demands .. |
|||
Tensile Strength, Ultimate | 60.0 MPa @Temperature 22.0 °C |
8700 psi @Temperature 71.6 °F |
25mm flat samples, compression moulded; ISO 527-4 |
Menzolit Menzolit® SMC 0160 Unsaturated Polyester UP SMC 0160 is a general purpose SMC for applications in the field of electrical industry. Typical applications are housings, covers, wire distribution boxes and metering cabinets. The material meets .. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | |
Saint-Gobain Micaver® Glass-Mica Electrical Insulator, Compression Moldings Glass-mica compound that occupies a place between plastics and ceramics in terms of usage temperature. It can be molded and machined like plastics and has the mechanical properties (strength, hardn.. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | 5mm/min; ISO 527 |
Styrolution Terblend® N NG-04 20% Glass Filled ABS/PA6 (Conditioned) Terblend N NG-04 is a glass fibre reinforced ABS/PA6 blend with excellent dimensional stability, low mold shrinkage and high heat resistance.Information provided by STYROLUTION, which is a joint ven.. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM D638 |
Plenco 00757 Melamine-Phenolic, Granular, Injection Molded PLENCO 00757 is a melamine-phenolic, copolymer molding compound, offering excellent arc resistance and comparative track index values. It is formulated to provide improved mechanical strength proper.. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ISO 527-1, 2 |
Polyplastics Duranex® 2002 Polybutylene Terephthalate (PBT), Standard DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers .. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ISO 527-1, 2 |
Polyplastics Duranex® 2002U Polybutylene Terephthalate (PBT), Weather resistance DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers .. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ISO 527-1, 2 |
Polyplastics Duranex® 300FP Polybutylene Terephthalate (PBT), Unfilled PBT for film, Extrusion, High Flow DURANEX® is a crystalline thermoplastic based on polybutylene terephthalate (PBT) that can be readily strengthened, modified, or otherwise performance enhanced through the addition of glass fibers .. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | 5mm/min; ISO 527-1, 2 |
Polyplastics TOPAS® 6015 Cyclic Olefin Copolymer (COC) (Asia/Pacific Grade) A similar grade to 6013. However, heat deflection temperature is (HDT/B) = 150°C. This is a temperature that cannot be achieved with many other amorphous polymers.Information provided by PolyPlasti.. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM D638 |
Covestro Makrolon® 2205 Polycarbonate, Injection Grade Exceptionally good flow injection molding grade with easy mold release, for parts with a low wall thickness and long flow paths.Information provided by Bayer.As of 1 September 2015, Bayer MaterialSc.. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ATSM D638 |
Ashley Polymers Ashlene® 525LD Nylon 66 High impact Nylon 66 with good stiffness, for injection molding.Data provided by the manufacturer |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ATSM D638 |
Ashley Polymers Ashlene® 180 Acetal A general purpose, high viscosity, natural.Data provided by the manufacturer |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ATSM D638 |
Ashley Polymers Ashlene® 839N Nylon 6, Film Grade Nylon 6 resin for blown or caste film, in addition to co-extrusion applications.Data provided by the manufacturer |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | 5mm/min; ISO 527 |
BASF Ultramid® A3HG2 10% Glass Filled PA66 (Conditioned) Ultramid A 3HG2 is a 10% glass fiber reinforced grade of nylon 6/6 for injection molding. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM D638 |
A. Schulman ComAlloy Hiloy® 662 Nylon 6, Glass Bead Reinforced Data provided by the manufacturer, ComAlloy International Company.20% Glass Bead Reinforced.The ComAlloy product line has been integrated into the A Schulman product line. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM data at 5 mm/min. |
BASF Capron® 8253 Impact Modified Nylon 6 (Conditioned)
(discontinued **) Capron 8253 is an unfilled type 6 graft copolymer developed for both injection molding and extrusion applications. It is also available in heat stabilized (Capron 8253 HS) and/or pigmented versions.. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ATSM D638 |
Ashley Polymers Ashlene® PC/ABS Alloy 307WO General purpose flame retardant with high impact, good low temperature properties and high heat resistance.Data provided by the manufacturer |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ASTM D638 |
Chevron Phillips Ryton® PR09-60 Polyphenylene Sulfide Compound
(discontinued **) Polyphenylene Sulfide CompoundRyton® PR09-60 is pelletized unfilled high molecular weight polyphenylene sulfide resin suitable for extrusion or injection molding.Comments: Test specimen molding con.. |
|||
Tensile Strength, Ultimate | 60.0 - 75.0 MPa @Temperature 130 - 175 °C |
8700 - 10900 psi @Temperature 266 - 347 °F |
Average value: 69.4 MPa Grade Count:2 |
Overview of materials for Nylon 6, 20% Glass Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Nylon 6, 20% Glass Fiber Filled".Specific grades with glass content between 15% and 24% are included. Ea.. |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ATSM D638 |
Ashley Polymers Ashlene® P1051R Polycarbonate A high flow transparent polycarbonate with good impact properties.Data provided by the manufacturer |
|||
Tensile Strength, Ultimate | 60.0 MPa | 8700 psi | ATSM D638 |
Ashley Polymers Ashlene® PC/ABS Alloy 307 General purpose with high impact, good low temperature properties and high heat resistance.Data provided by the manufacturer |