Polymer Property : Tensile Strength, Ultimate = 1000 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Ultimate	6.90 MPa	1000 psi	X, Y direction; ASTM D638
Rogers Corporation RT/duroid® 6002 High Frequency Laminate Features:Low loss for excellent high frequency performanceTight dielectric constant and thickness controlExcellent electrical and mechanical propertiesExtremely low thermal coefficient of dielectric..
Tensile Strength, Ultimate	6.90 MPa	1000 psi	TPE-0153 (ASTM D 412)
Advanced Elastomer Systems Trefsin® 3101-75 W305 Thermoplastic Rubber (discontinued **) A black thermoplastic elastomer with excellent permeation resistance to water, air and other gases. It can be processed using injection molding, extrusion, blow molding or other melt processing tec..
Tensile Strength, Ultimate	6.89 - 50.0 MPa	1000 - 7250 psi	Average value: 20.3 MPa Grade Count:68
Overview of materials for Polytetrafluoroethylene (PTFE), Glass Filled, Molded This property data is a summary of similar materials in the MatWeb database for the category "Polytetrafluoroethylene (PTFE), Glass Filled, Molded". Each property range of values reported is minimum..
Tensile Strength, Ultimate	6.90 MPa	1000 psi	ASTM D3574E
Mearthane Durethaneâ„¢ M DM-710A Foam Polyurethane MDI backbone: ether.Shore 00 Hardness: 55Summary: Durethane M is a flexible, microcellular, open cell and closed cell urethane foam. Because it is mechanically mixed, the cell size is uniform. Dur..
Tensile Strength, Ultimate	6.90 MPa	1000 psi	ASTM D412
Multibase Multi-FlexÂ® TPE A 5501 LC GREY Multi-Flex TPE contains Kratonâ„¢ G.Data provided by Multibase.
Tensile Strength, Ultimate	6.89 MPa	1000 psi	molded-without post cure; ASTM D412
Multibase C6-235 PERKADOX PD-50S Dow-Corning Class VI Elastomer Information provided by Multibase
Tensile Strength, Ultimate	6.89 MPa	1000 psi	molded-without post cure; ASTM D412
Multibase C6-235 VAROX DBPH Dow-Corning Class VI Elastomer Information provided by Multibase
Tensile Strength, Ultimate	6.89 MPa	1000 psi
Sylvin Technologies 9999-65 Natural PVC Molding Compound Information provided by Sylvin Technologies Inc.
Tensile Strength, Ultimate	6.89 MPa	1000 psi	Dry; ASTM D412
Lubrizol Estane® ALR G500 Water Absorbent Thermoplastic Polyurethane Type: Estane® ALR G500 is an aliphatic thermoplastic polyurethane (TPU) resin designed to absorb water and transport moisture.Features: Contains UV additivesAvailable in AmericasInformation Provide..
Tensile Strength, Ultimate	6.90 MPa @Temperature 49.0 °C	1000 psi @Temperature 120 °F	Type IV, crosshead speed 2 in/min; ASTM D638
DuPont Elvax® 550 Ethylene-Vinyl Acetate Copolymer Resin Elvax resins offer a unique combination of processing and performance characteristics. They provide outstanding toughness and resilience and maintain flexibility over a broad temperature range with..
Tensile Strength, Ultimate	6.89 MPa	1000 psi
Dow Corning SILASTIC® 37084-D SILICONE RUBBER BLACK 40 Durometer, peroxide cured, low compression set Silicone Rubber CompoundInformation provided by Dow Corning
Tensile Strength, Ultimate	6.89 MPa	1000 psi
Cytec EN-2527 (Conap) Potting and Encapsulation Adhesive Polyurethane Potting and Encapsulating SystemsConathane® EN-2500 series polyurethane potting and encapsulating systems from Cytek have varying degrees of worklife, viscosity and hardness for many s..
Tensile Strength, Ultimate	6.90 MPa	1000 psi	508 mm/min; ASTM D638
Dow Engage® 8200 Polyolefin Elastomer Description: Engage® 8200 and Engage® 8207 polyolefin elastomers are ethylene-octene copolymers that have excellent flow characteristics and performs well in a wide range of general purpose thermo..
Tensile Strength, Ultimate	6.90 MPa	1000 psi	508 mm/min; ASTM D638
Dow Engage® 8207 Polyolefin Elastomer Description: Engage® 8207 polyolefin elastomer is a loose talc surface coated ethylene-octene copolymer. The talc is untreated and has a nominal 1µm particle size. This product offers the exceptio..
Tensile Strength, Ultimate	6.89 MPa	1000 psi
Dymax 9-20558 Conformal Coating High Performance Light-Curing Adhesives and Coatings for Electronic AssemblyDymax 9-20558 Conformal CoatingThick barrier coating; excellent protection of sensitive circuits from moisture. Cure Speed..
Tensile Strength, Ultimate	>= 6.90 MPa	>= 1000 psi
Arlon 0.010" (0.254 mm) Layer-on-Layer Silicone Traction Motor Insulation (51229R020) 0.010 in. (0.25 mm) minimum uncured silicone on 0.002 in. (0.5 mm) minimum cured silicone on 0.008 in. (0.2 mm) nominal Prime Coated 7628 Fiberglass; 0.003 in. (0.08 mm) polyethylene interleave; ove..
Tensile Strength, Ultimate	>= 6.90 MPa	>= 1000 psi
Arlon 0.015" (0.381 mm) Layer-on-Layer Silicone Traction Motor Insulation (51229R015) 0.005 in. (0.1 mm) minimum uncured silicone on 0.002 in. (0.5 mm) minimum cured silicone on 0.008 in. (0.2 mm) nominal Prime Coated 7628 Fiberglass; 0.003 in. (0.08 mm) polyethylene interleave; over..
Tensile Strength, Ultimate	>= 6.90 MPa	>= 1000 psi
Arlon 0.020" (0.508 mm) Silicone Traction Motor Insulation with Fiberglass Substrate (19220R020) Uncured silicone rubber with a minimum thickness of 0.005 in. (0.13 mm) on Prime Coated 1523 Fiberglass; 0.0015 in. (0.8 mm) polyethylene interleave; overall thickness 0.020 in ± 0.0015 (0.51 mm ±..
Tensile Strength, Ultimate	>= 6.90 MPa	>= 1000 psi
Arlon 0.030" (0.762 mm) Silicone Traction Motor Insulation with Fiberglass Substrate (19220R030) Uncured silicone rubber with a minimum thickness of 0.015 in.(0.38 mm) on Prime Coated 1523 Fiberglass; 0.0015 in. (0.8 mm) polyethylene interleave; overall thickness 0.030 in ± 0.003 (0.76 mm ± 0..
Tensile Strength, Ultimate	6.89 MPa	1000 psi	silicone property; ASTM D412
Arlon 25188T010 Silicone Rubber/Laminated ETFE Film Liner: 3 mil PTFE coated fiberglass; Side 1: uncured silicone rubber; Substrate: laminated ETFE film, treated for adhesion
Tensile Strength, Ultimate	6.89 MPa	1000 psi	silicone property; ASTM D412
Arlon 25188T017 Silicone Rubber/Laminated ETFE Film Liner: 3 mil PTFE coated fiberglass; Side 1: uncured silicone rubber; Substrate: laminated ETFE film, treated for adhesion
Tensile Strength, Ultimate	>= 6.90 MPa	>= 1000 psi
Arlon Thermavac® 0.030" (0.762 mm) Uncured Silicone Vacuum Bagging (30400N030) Uncured, unsupported silicone rubber with a thickness of 0.030 in ± 0.003 (0.76 mm ± 0.038) on a Kodacel carrier (0.005 in., 0.13 mm nominal thickness); 0.003 in. (0.8 mm) polyethylene interleave...
Tensile Strength, Ultimate	6.89 MPa	1000 psi	ASTM D412; ISO 37
Advanced Polymer Alloys Alcryn® 2250 UT Melt Processable Rubber Alcryn melt-processable rubber (MPR) is a true rubber, based on a partially cross-linked, chlorinated olefin interpolymer alloy. Alcryn is designed for the manufacture of rubber parts with high prod..
Tensile Strength, Ultimate	6.90 MPa	1000 psi	TPE-0153 (ASTM D 412)
Advanced Elastomer Systems Santoprene® 101-64 W175 Thermoplastic Rubber (discontinued **) A black thermoplastic general purpose elastomer designed for thin wall extrusion with good fluid resistance, formulated to replace thermoset elastomers such as EPDM, polychloroprene, and chlorosulfo..
Tensile Strength, Ultimate	6.90 MPa	1000 psi	TPE-0153 (ASTM D 412)
Advanced Elastomer Systems Santoprene® 281-64 Thermoplastic Rubber (discontinued **) A colorable thermoplastic medical grade elastomer with good fluid resistance, certified non-toxic by MEM elution test. It has USP Class VI Certificate of Compliance for biocompatibility and can be ..
Tensile Strength, Ultimate	6.89 MPa	1000 psi	TM R050-36
Resinlab® SEC1222 Silver Filled Epoxy Adhesive Resinlab™ SEC1222 is a silver filled, two component, room temperature curing epoxy adhesive. It is designed to cure completely at room temperature. SEC1222 provides excellent electrical conductivit..
Tensile Strength, Ultimate	6.89 MPa	1000 psi
Loctite® 5145 Form-In-Place Adhesive/Sealant Gasketing and Wire TackersLoctite® innovative gasketing products offer precise, reliable sealing of electronic enclosures, protecting them from environmental hazards. Loctite offers both Form-in-pl..
Tensile Strength, Ultimate	6.89 - 130 MPa	1000 - 18900 psi	Average value: 80.8 MPa Grade Count:184
Overview of materials for Polypropylene with 30% Glass Fiber Filler This property data is a summary of similar materials in the MatWeb database for the category "Polypropylene with 30% Glass Fiber Filler". Specific grades with glass content between 25% and 34% are i..