Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Modulus | 0.600 GPa | 87.0 ksi | ASTM D638 |
Quadrant EPP TIVAR® Dockguard - UHMW-PE - Black UV Stabilized UHMW-PE (ASTM Product Data Sheet) |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | ASTM D638 |
Quadrant EPP TIVAR® DrySlide UHMW-PE, Lubricant Filled, Electro Static Dissipative, UV Stabilized (ASTM Product Data Sheet) |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | ISO 527-1/-2 |
Quadrant EPP TIVAR® SuperPlus PE-UHMW + specific additives (ISO Data) TIVAR SuperPlus is a wear optimised, partially cross-linked PE-UHMW material with extremely high degree of polymerisation for use in most demanding applications and environments. When used for drain.. |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | |
Radici Radilon® S USX200 (cond.) Nylon 6 Radilon® S is a range of polyamide 6 (PA6) products obtained through the polymerization of caprolactam and used for injection, extrusion and blow-molding.Information provided by Radici group. |
|||
Tensile Modulus | 0.600 GPa @Temperature 175 °C |
87.0 ksi @Temperature 347 °F |
ISO 527 |
Solvay Specialty Polymers Amodel® AP-9240 NL Polyphthalamide (PPA) Resin, 40% Mineral Filled, Dry as Molded
( AMODEL AP-9240 NL resin is a 40% mineral-filled, impact-modified polyphthalamide (PPA). It was designed to provide a smooth molded surface suitable for many decorative applications. This resin offer.. |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | ASTM D4894 |
3M Dyneon™ 1750 PTFE Powder
(discontinued **) Type II PTFE. The unique properties of polytetrafluoroethylene (PTFE) makes it an indispensable material for modern industry. PTFE offers the following exceptional characteristics:Inert to a wide r.. |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | ASTM D4894 |
3M Dyneon™ 1620 PTFE Powder
(discontinued **) Type II, gr. 3 PTFE. The unique properties of polytetrafluoroethylene (PTFE) makes it an indispensable material for modern industry. PTFE offers the following exceptional characteristics:Inert to a.. |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | ASTM D638 |
3M Dyneon™ 1645 PTFE Powder
(discontinued **) Type IV, gr. 2 PTFE. The unique properties of polytetrafluoroethylene (PTFE) makes it an indispensable material for modern industry. PTFE offers the following exceptional characteristics:Inert to a.. |
|||
Tensile Modulus | 0.600 - 0.700 GPa | 87.0 - 102 ksi | DIN 53457 |
Isoflon TFM Fluoropolymer material specifications.Information provided by Isoflon. |
|||
Tensile Modulus | 0.600 - 0.700 GPa | 87.0 - 102 ksi | DIN 53457 |
Isoflon PTFE Polytetrafluoroethylene Fluoropolymer material specifications.Information provided by Isoflon. |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | ASTM D638 |
Solvay Specialty Polymers Hyflon® PFA P220 Perfluoroalkoxy (PFA) Hyflon® PFA is a unique family of semi-crystalline, melt processable perfluoropolymers which combine excellent mechanical characteristics to unique properties such as chemical inertness, heat res.. |
|||
Tensile Modulus | 0.600 - 0.800 GPa @Temperature 100 °C |
87.0 - 116 ksi @Temperature 212 °F |
DIN 53457 |
Zell-Metall Engineering Plastics Zellamid 1115 By special additives, impact strength and abrasion resistance are further improved. We particularly recommend this material for slipper pads for rolling mills.Color: IvoryApplications: slipper pads .. |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | conditioned; ISO 527-1/-2 |
EMS-Grivory Grivory® BFZ 3 PA6 Product description: Grilon BFZ 3 is an unreinforced, high impact resistant PA6 extrusion grade. Grilon BFZ 3 has the following important properties: Extreme toughnessEasy processingLow density Gril.. |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | dry; ISO 527-1/-2 |
EMS-Grivory Grivory® BRZ 347 W PA6 Product description: Grilon BRZ 347 W is a heat stabilized, high viscosity, impact modified and plasticized PA6 extrusion grade. Grilon BRZ 347 W has the following important properties: High flexibi.. |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | conditioned; ISO 527-1/-2 |
EMS-Grivory Grivory® BZ 3 PA6 Information provided by EMS Grivory |
|||
Tensile Modulus | 0.600 GPa @Temperature 180 °C |
87.0 ksi @Temperature 356 °F |
ISO 527-1/-2 |
DSM Stanyl® TS300 PA46 |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | ISO 527-1/-2 |
DSM Stanyl® TW363 (COND) Nylon 46 Heat Stabilized, Impact Modified (North America) Information provided by DSM Engineering Plastics. |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | conditioned; ISO 527-1/-2 |
EMS-Grivory Grivory® R 50 H NZ PA6 Product description: Grilon R 50 H NZ is a high viscosity, unreinforced, heat stabilized, impact modified PA6 extrusion blow molding grade. Grilon R 50 H NZ has the following important properties: V.. |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | dry; ISO 527-1/-2 |
EMS-Grivory Grivory® XE 4180 black 9992 PA1010 Product description: Grilamid XE 4180 black 9992 is a unreinforced, high viscosity, plasticized, high impact resistant polyamide 1010 (PA1010) extrusion grade. Grilamid XE 4180 black 9992 is highly .. |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | dry; ISO 527-1/-2 |
EMS-Grivory Grivory® XE 4180 nat PA1010 Product description: Grilamid XE 4180 natural is a unreinforced, high viscosity, plasticized, high impact resistant polyamide 1010 (PA1010) extrusion grade. Grilamid XE 4180 NATURAL is highly resist.. |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | conditioned; ISO 527-1/-2 |
EMS-Grivory Grivory® XE 4181 black PA1010 Product description: Grilamid XE 4181 black 9992 is a unreinforced, high viscosity, plasticized, high impact resistant polyamide 1010 (PA1010) extrusion grade. Grilamid XE 4181 black 9992 is highly .. |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | ISO 527-1/-2 |
DSM Stanyl® TW363 Nylon 46 (European Grade) (Cond) Stanyl is a high performance polyamide providing good performance and value across a broad range of automotive and electronic applications. Stanyl offers:Highest mechanical properties at high temper.. |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | conditioned; ISO 527-1/-2 |
EMS-Grivory Grivory® L 25 W 10 H X PA12 Product Description: Grilamid L 25 W 10 HX is a semi flexible, plasticized, high viscosity extrusion grade of Polyamide 12 (PA12). Grilamid L 25 W 10 HX is impact modified and heat and UV stabilized.. |
|||
Tensile Modulus | 0.600 GPa @Temperature 120 °C |
87.0 ksi @Temperature 248 °F |
ISO Data |
BASF Ultramid® HPN 9362 40% Mineral Filled PA6 (Conditioned) Ultramid HPN 9362 is a 40% mineral reinforced, impact modified nylon 6 injection molding compound. It is one of the High Productivity Nylon series having improved surface appearance while reducing c.. |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | Sintered Molding; ASTM D638 |
3M Dyneon™ TF 1641 PTFE Meets ASTM D4894 Type IV, Grade 2 resinMolding and ram extrusion powder very good free-flow propertiesGood metering propertiesGood mold filling behaviorGood electrical and mechanical propertiesVery .. |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | Sintered Molding; ASTM D638 |
3M Dyneon™ TF 1620 PTFE Meets ASTM D4894 Type IV, Grade 2 resinSemi-free-flowing compression molding powderHigh bulk densityGood for large billets and thin walled isostatic moldingsVery dense polymer structure, similar to .. |
|||
Tensile Modulus | 0.600 GPa @Temperature 180 °C |
87.0 ksi @Temperature 356 °F |
ISO 527-1/-2 |
DSM Stanyl® TE300 PA46 Heat Stabilized |
|||
Tensile Modulus | >= 0.600 GPa | >= 87.0 ksi | DIN 53457 |
Adamas Adalon® 911 PTFE Information provided by Adamas, HPM |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | 1 mm/min |
Arkema Group Orgalloy® LE 60LMXV Flexible Nylon Alloy (Conditioned) LE series, flexible polyamide alloys: processability on PE screw, low moisture absorption, chemical resistance (no known solvents). Suited to the extrusion of tubes (hydraulic, pneumatic, painting.... |
|||
Tensile Modulus | 0.600 GPa | 87.0 ksi | 1 mm/min |
Arkema Group Orgalloy® LT 6040 Flexible Nylon Alloy (Conditioned) Very flexible polyamide alloy: easy to process, low moisture absorption, good mechanical properties at low temperature. Demonstrate a good balance of properties eg, high flexibility (500 MPa), good .. |