- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 46
- Nylon 46, Unreinforced
- DSM Stanyl® TW363 (COND) Nylon 46 Heat Stabilized, Impact Modified (North America)
DSM Stanyl® TW363 (COND) Nylon 46 Heat Stabilized, Impact Modified (North America)
| Category | Polymer , Thermoplastic , Nylon , Nylon 46 , Nylon 46, Unreinforced |
| Manufacturer | DSM Engineering Plastics |
| Trade Name | Stanyl® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | DSM Stanyl® TW363 (COND) Nylon 46 Heat Stabilized, Impact Modified (North America).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by DSM Engineering Plastics.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.10 g/cc | 0.0397 lb/in³ | (DAM); ISO 1183 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 45.0 MPa | 6530 psi | ISO 527-1/-2 |
| Elongation at Yield | >= 50 % | >= 50 % | Nominal; ISO 527-1/-2 |
| Tensile Modulus | 0.600 GPa | 87.0 ksi | ISO 527-1/-2 |
| Charpy Impact Unnotched | NB | NB | ISO 179/1eU |
| NB @Temperature -30.0 °C |
NB @Temperature -22.0 °F |
ISO 179/1eU | |
| Charpy Impact, Notched | 12.5 J/cm² | 59.5 ft-lb/in² | ISO 179/1eU |
| 3.00 J/cm² @Temperature -30.0 °C |
14.3 ft-lb/in² @Temperature -22.0 °F |
ISO 179/1eU |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Melting Point | 295 °C | 563 °F | (DAM); ISO 11357-1/-3 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+7 ohm-cm | 1.00e+7 ohm-cm | IEC 60093 |
| Dielectric Strength | 15.0 kV/mm | 381 kV/in | IEC 60243-1 |
| Comparative Tracking Index | 475 V | 475 V | IEC 60112 |
Users viewing this material also viewed the following:
- SABIC Innovative Plastics Lexan® HP4REU PC (Europe-Africa-Middle East)
- PolyOne Stat-Tech™ PS-NX 102902 CM Black Polybutylene Terephthalate (PBT) (discontinued **)
- Eastman Vitiva PC715 PET (discontinued **)
- Pyrotek L-6 Fiberseal Blanket
- Mallard Creek Polymers Rovene® 5051 Styrene-Butadiene Emulsion
- AK Steel ZINCGRIP® GA Hot Dip Galvannealed Carbon Deep Drawing Steel (DDS Type B), Standard Grade
- Asahi Kasei Thermylene® P1-25FM-Y175 25% Glass Fiber/ Mineral Reinforced
- Amity Thermosets ATS 132 Phenolic Molding Organic, inorganic, and graphite Filler, Compression Molded
- Ceradyne Ceralloy® 13740Y AlN-SiC
- TSE Industries Millathane® 76 Millable Polyester Polyurethane Rubber, 1.25 PHR Zinc Stearate
Copyright © lookpolymers.com All Rights Reserved