Polymer Property : Tensile Strength, Yield = 3700 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Strength, Yield	25.5 MPa	3700 psi	Type I, 51 mm/min; ASTM D638
PolyOne Maxxam™ PPH-20C UV Natural Polypropylene Homopolymer (PP Homopolymer) PolyOne's Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium car..
Tensile Strength, Yield	>= 25.5 MPa	>= 3700 psi	ASTM D638
S&E Specialty Polymers TufGuard M™ GPP1001M-P-2986 Grey PP, Flame Retardant Application: High impact resistant, non-blooming flame retardant polypropylene compound designed for UL94 V-0 injection molding applications.Information provided by S&E Specialty Polymers
Tensile Strength, Yield	25.5 MPa	3700 psi	2 in per min; ASTM D638
Network Polymers NPP 25-1902 Description: Copolymer PolypropyleneInformation provided by Network Polymers Inc.
Tensile Strength, Yield	25.5 MPa	3700 psi
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 90 PHR N330 Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje..
Tensile Strength, Yield	25.5 MPa	3700 psi	ASTM D638
Hyosung Topilene C600M PP C600M Film Grade Butane Random CopolymerApplications: Metallizing CPPCharacteristics:Low sealProcessabilityInformation provided by Hyosung Corporation
Tensile Strength, Yield	25.5 MPa @Thickness 3.20 mm	3700 psi @Thickness 0.126 in	50mm/min; ASTM D638
LG Chemical LUPOL EI5002 PP Description: Injection Molding, PP, General PurposeApplication: Automotive Interior PartsCAS: 9003-07-0, 9010-79-1 and 9002-88-4Information provided by LG Chemical
Tensile Strength, Yield	25.5 MPa	3700 psi	ASTM D638
Global J-2308 High Density Polyethylene Description-industrial injection grade w/ UV stabilizer, good for high impact strengthApplications-high quality industrial products, outdoor applications such as pallets & cratesInformation provided..
Tensile Strength, Yield	25.5 MPa	3700 psi	2 in/min (50 mm/min); ASTM D-638
Ineos HP53-25-155 HDPE HP53-25-155 is a high performance, high density polyethylene copolymer developed for blow molding. It is recommended for use in continuous extrusion blow molding equipment, specifically where appli..
Tensile Strength, Yield	25.5 MPa	3700 psi	ASTM D638
Lotte Chemical Titan TITANZEXÂ® HM5000 High density polyethylene HM5000 is a high density polyethylene for extrusion monofilament. HM5000 meets the U.S. Food and Drug Administration (FDA) criteria for food contact use as specified in 21 CFR 177.1520 (c) 3.1a & 3...
Tensile Strength, Yield	25.5 MPa	3700 psi	ASTM D638
LyondellBasell PetrotheneÂ® LP5100 High Density Polyethylene ApplicationsPETROTHENE LP 5100 is especially designed for large-part blow molding of durable goods and deep-draw sheet extrusion/thermoforming applications. LP 5100 exhibits excellent impact resist..
Tensile Strength, Yield	25.5 MPa @Thickness 3.20 mm	3700 psi @Thickness 0.126 in	50mm/min; ASTM D638
LG Chemical LUPOL HI5302S PP+MF15%, High Impact Description: Injection Molding, PP+MF15%, High Impact, Good WeatherabilityApplication: Automotive Interior PartsInformation provided by LG Chemical
Tensile Strength, Yield	25.5 MPa	3700 psi	ASTM D638
Techmer ES LuriblendÂ® PE 5902 Availability: North AmericaForms: PelletsAdditive: LubricantFeatures: Lubricated, Good Wear Resistance and Low FrictionProcessing Method: Injection MoldingInformation provided by TP Composites, Inc...
Tensile Strength, Yield	25.5 MPa	3700 psi	ASTM D638
Techmer ES HiFill FRÂ® PP FR-N X Availability: North AmericaForms: PelletsFeatures: Flame Retardant Appearance: Natural ColorInformation provided by TP Composites, Inc.
Tensile Strength, Yield	25.5 MPa	3700 psi	ASTM D638
SCG Chemicals EL-Proâ„¢ P841J Polypropylene Injection Molding Key Characteristics:Excellent flowabilityExcellent processabilityHigh stiffnessSuitable for complex parts and large partsContains UV stabilizer and anti-static agentRecommended Applications:Electric..
Tensile Strength, Yield	25.5 MPa	3700 psi	at 100% elongation; ASTM D412
Lubrizol Estane® S368D Thermoplastic Polyurethane Type: Estane® S368D is a Shore 68D, polyester based thermoplastic polyurethane (TPU) with excellent transparency. FDA approved (21 CFR 177.2600, 177.1680).Uses: Injection Molding.Availability: Asi..
Tensile Strength, Yield	25.5 MPa	3700 psi	ASTM D638
A. Schulman PP 3353-01 Polypropylene Medium Impact Polypropylene DescriptionPolypropylene PP 3353-01 is a high flow medium impact polypropylene which is suitable for molding thin parts with long mold flow distances. It permits reduction of cycle times, temperatu..
Tensile Strength, Yield	25.5 MPa	3700 psi	2 in/min; ASTM D638
A. Schulman PP 3449-01 Polypropylene Copolymer Polypropylene DescriptionPolypropylene PP 3449-01 is a new generation copolymer polypropylene utilizing unique catalyst technology. Combining an excellent balance of high stiffness and impact. This product inc..
Tensile Strength, Yield	25.5 MPa	3700 psi	at max load; ASTM D638
A. Schulman PP 828-01 Polypropylene Molding Grade Impact Polypropylene DescriptionPolypropylene PP 828-01 is a molding grade impact polypropylene. ApplicationThis material meets the FDA Regulation 21 CFR 177.1520 for food contact applications. Information provided by ..
Tensile Strength, Yield	25.5 MPa	3700 psi	2 in/min; ASTM D638
A. Schulman PP 3449-01 Polypropylene Copolymer Polypropylene DescriptionPolypropylene PP 3449-01 is a new generation copolymer polypropylene utilizing unique catalyst technology. Combining an excellent balance of high stiffness and impact. This product inc..
Tensile Strength, Yield	25.5 MPa	3700 psi	2 in/min; ASTM D638
A. Schulman PP 2407 Polypropylene Impact Resistant Copolymer Polypropylene DescriptionPolypropylene PP 2407 is a low flow, impact resistant copolymer polypropylene. Information provided by A. Schulman.
Tensile Strength, Yield	25.5 MPa	3700 psi	2 in/min; ASTM D638
A. Schulman PP 2407 Polypropylene Impact Resistant Copolymer Polypropylene DescriptionPolypropylene PP 2407 is a low flow, impact resistant copolymer polypropylene. Information provided by A. Schulman.
Tensile Strength, Yield	25.5 MPa	3700 psi	ASTM D638
A. Schulman PP 3353-01 Polypropylene Medium Impact Polypropylene DescriptionPolypropylene PP 3353-01 is a high flow medium impact polypropylene which is suitable for molding thin parts with long mold flow distances. It permits reduction of cycle times, temperatu..
Tensile Strength, Yield	25.5 MPa	3700 psi	ASTM D638
A. Schulman POLYFORT™ FPP 1182 Talc Fortified Impact Resistant Polypropylene DescriptionPolyfort® FPP 1182 is a 20% talc fortified impact resistant polypropylene.Information provided by A. Schulman.
Tensile Strength, Yield	25.5 MPa	3700 psi
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 90 PHR N330 Filler MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje..
Tensile Strength, Yield	25.5 MPa	3700 psi	ASTM D638
ExxonMobil HDPE HD 6719.17 High Density Polyethylene Copolymer Resin Product Description: HD 6719 is a narrow molecular weight hexane copolymer designed for a wide rage of injection molding applications, combining easy processability with good toughness properties. I..
Tensile Strength, Yield	25.5 MPa	3700 psi	ASTM D638
ExxonMobil HDPE HD 6719.62 High Density Polyethylene Copolymer Resin Product Description: HD 6719 is a narrow molecular weight hexane copolymer designed for a wide rage of injection molding applications, combining easy processability with good toughness properties. I..
Tensile Strength, Yield	25.5 MPa	3700 psi	ASTM D638
Amco Amalloy® B9714 Polymer Alloy Amco Amalloy B9714 is a clear performance copolymer with exceptional clarity and toughness.High elongation before breakage, good melt Flow.Information provided by Amco Plastic Materials.
Tensile Strength, Yield	25.5 MPa	3700 psi	2 in/min; ASTM D638
A. Schulman PP 2407 Polypropylene Impact Resistant Copolymer Polypropylene DescriptionPolypropylene PP 2407 is a low flow, impact resistant copolymer polypropylene. Information provided by A. Schulman.
Tensile Strength, Yield	25.5 MPa	3700 psi	2 in/min (50 mm/min); ASTM D-638
Ineos J50-1000-181 HDPE A high density polyethylene copolymer. It has a narrow molecular weight distribution and is intended for the injection molding of screw caps dedicated to the packaging of still water. This resin c..
Tensile Strength, Yield	25.5 MPa	3700 psi	2 in/min.; ASTM D638
Ineos J50-1000-187 HDPE A high density polyethylene copolymer. It has a narrow molecular weight distribution and is intended for the injection molding of screw caps dedicated to the packaging of still water. This resin con..