Ineos J50-1000-181 HDPE

Category	Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Injection Molded
Manufacturer	Ineos Olefins & Polymers USA
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	Ineos J50-1000-181 HDPE.pdf
Price	EMAIL US sales@lookpolymers.com
	Online Service lookpolymers 27660005

Material Notes:

A high density polyethylene copolymer. It has a narrow molecular weight distribution and is intended for the injection molding of screw caps dedicated to the packaging of still water. This resin contains a lubrication package for improved release from the mold and lower application torques on the bottles. This material meets the FDA requirements of 21CFR 177.1520.

Physical Properties	Metric	English	Comments
Density	0.951 g/cc	0.0344 lb/in³	ASTM D4883
Environmental Stress Crack Resistance	4.0 hour	4.0 hour	Condition A; ASTM D1693
Melt Flow	11 g/10 min @Load 2.16 kg, Temperature 190 °C	11 g/10 min @Load 4.76 lb, Temperature 374 °F	ASTM D1238

Mechanical Properties	Metric	English	Comments
Hardness, Shore D	65	65	ASTM D2240
Tensile Strength, Yield	25.5 MPa	3700 psi	2 in/min (50 mm/min); ASTM D-638
Elongation at Break	>= 500 %	>= 500 %	2 in/min (50 mm/min); ASTM D-638
Flexural Modulus	1.207 GPa	175.1 ksi	Tangent-Method 1; ASTM D790
Izod Impact, Notched	0.500 J/cm	0.937 ft-lb/in	ASTM D256

Thermal Properties	Metric	English	Comments
Deflection Temperature at 0.46 MPa (66 psi)	77.0 °C	171 °F	ASTM D648
Vicat Softening Point	128 °C	262 °F	ASTM D1525
Brittleness Temperature	<= -75.0 °C	<= -103 °F	ASTM D746

Users viewing this material also viewed the following: