TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 90 PHR N330 Filler

Category	Polymer , Thermoset , Polyester, TS , Polyurethane, TS , Thermoset Polyurethane, Elastomer, Unreinforced , Rubber or Thermoset Elastomer (TSE)
Manufacturer
Trade Name
Port	Ningbo port,China
Trade Terms	FOB, CFR, CIF
Payment Terms	L/C, T/T, Western Union
Download PDF	TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 90 PHR N330 Filler.pdf
Price	EMAIL US sales@lookpolymers.com

Material Notes:

MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subjected to high wear in service. It has a unique combination of excellent properties, such as low temperature characteristics, and resistance to heat deterioration, ozone cracking, weathering and swelling in oils or solvents.FormulationMillathane CM 100.0N33090.0Coumarone-Indene Resin30.0MBTS4.0MBT1.0Sulfur0.75CAYTUR 40.35Zinc Stearate0.50All information provided by TSE Industries

Physical Properties	Metric	English	Comments
Specific Gravity	1.30 g/cc	1.30 g/cc
Mooney Viscosity	55 @Temperature 121 °C	55 @Temperature 250 °F

Mechanical Properties	Metric	English	Comments
Hardness, Shore A	85	85
Tensile Strength, Yield	25.5 MPa	3700 psi
Elongation at Yield	390 %	390 %
100% Modulus	0.007757 GPa	1.125 ksi
300% Modulus	0.0248 GPa	3.60 ksi
Tear Strength	75.6 kN/m	431 pli	Graves
Abrasion	225	225	NBS Index
Compression Set	25 %	25 %	Method B

Processing Properties	Metric	English	Comments
Cure Time	60.0 min @Temperature 142 °C	1.00 hour @Temperature 287 °F

Users viewing this material also viewed the following: