Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 27.6 MPa | 4000 psi | 2 in/min; ASTM D638 |
Phillips 66 COPYLENE® CR350LN Polypropylene, Random Copolymer COPYLENE™ CR350LN is a high flow random copolymer nucleated and with antistat for good mold release in injection molding applications. Applications: Containers, Closures, HousewaresInformation prov.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | (2 in/min); ASTM D638 |
Phillips 66 COPYLENE® CR750CLS Polypropylene Random Copolymer Description: COPYLENE® CR750CLS is a clarified random copolymer specially designed and formulated for clear injection molding applications and is formulated with antistat and lube for excellent mol.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | ASTM D638 |
Polymer Resources PPX-SF2 Modified PPO, Structural Foam Grade, Standard Flow
(Unverified Data**) Process: Foam MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Foam grades tested with foamed parts with a 10% weight reduction rel.. |
|||
Tensile Strength, Yield | 27.6 - 119 MPa | 4000 - 17300 psi | Average value: 57.1 MPa Grade Count:3 |
Overview of materials for Acrylonitrile Butadiene Styrene (ABS), Carbon Black Filled This property data is a summary of similar materials in the MatWeb database for the category "Acrylonitrile Butadiene Styrene (ABS), Carbon Black Filled". Each property range of values reported is m.. |
|||
Tensile Strength, Yield | <= 27.6 MPa | <= 4000 psi | |
TSE Industries Millathane® 28 Millable Polyester Polyurethane Rubber Millathane 28 has excellent resistance to gas (e.g., nitrogen) permeability as well as very good abrasion resistance and low temperature properties. This polyurethane rubber was designed for automot.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | Type IV; 50 mm per min; ASTM D638 |
Chevron Phillips Marlex® HHM 5502-04BN HDPE Hexene Copolymer
(discontinued **) This resin allows the blow molder to reduce inventory of resin types, because it can be used to package bleach and most detergents. Meets ASTM D4976 - PE 235. ASTM D1248 - Type III, Class A, Cat.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | ASTM D638 |
LyondellBasell Petrothene® LR732031 High Density Polyethylene ApplicationsPETROTHENE LR 7320-31 is a high density polyethylene resin that exhibits an excellent balance of stiffness and environmental stress crack resistance. This resin has outstanding extrusio.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | ASTM D638 |
LyondellBasell Petrothene® LR734001 High Density Polyethylene (Sheet & Profile Extrusion) ApplicationsThe PETROTHENE LR 7340 series of polyethylene resins exhibits good stiffness and ESCR. Typical applications include bottles for household chemicals.Regulatory StatusThe base resin LR 73.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | ASTM D638 |
M. Holland Company CP501 Polypropylene Impact Copolymer AntistaticImpact copolymerHigh flowGood impact resistanceNucleatedGood stiffnessApplications: FurnitureHousehold goodsOutdoor furnishingsToys |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | ASTM D638 |
M. Holland Company CP910 Polypropylene Impact Copolymer AntistaticImpact copolymerHigh flowNucleatedSlipHigh stiffnessApplications: ContainersHousehold goodsThin-walled parts |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | 2 in/min.; ASTM D638 |
Ineos HP55-25-155 HDPE A high performance high density polyethylene copolymer developed for blow molding. It is recommended for use in continuous extrusion blowmolding equipment, specifically where applications require ex.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | ASTM D638 |
Techmer ES HiFill® PP GB10 10% Glass Beads Filled Availability: North AmericaForms: PelletsFiller/Reinforcement: Glass Bead, 10% Filler by WeightInformation provided by TP Composites, Inc. |
|||
Tensile Strength, Yield | >= 27.6 MPa | >= 4000 psi | ASTM D-882 |
Saint-Gobain Norton® T-100 Virgin Skived PTFE Sheet (0.015" thick) T-100/T-200 Features/Benefits: Outstanding heat and chemical resistance; High dielectric strength; Anti-stick properties; Can be chemically etched for bondability; Applications include laminate rele.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | ASTM D 638 |
Styrolution Clearblend 145 MBS Clearblend 145 is an impact modified styrene acrylic copolymer blend with excellent clarity.Excellent clarityLow densityEase of processingLow moisture absorptionInformation provided by Styrolution |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | 2 in/min; ASTM D638 |
A. Schulman PP 3052X-01 Polypropylene Impact Resistant Copolymer DescriptionPolypropylene PP 3052X-01 is an extra high flow impact resistant copolymer with relatively high stiffness. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | 2" (50mm) per min; ASTM D638 |
Formosa Plastics Formolene® 2302E Impact Copolymer Polypropylene Impact Copolymer for Extrusion Applications Formolene® 2302E is a low flow, medium impact polypropylene copolymer designed for extrusion applications. It is a barefoot resin with a basic stabilizat.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | ASTM D638 |
Total PSI 825EX Polystyrene Polystyrene 825EX is a high impact polystyrene designed for high stiffness in extrusion/thermoforming applications. The balance of high stiffness and impact properties allow for light weighting of t.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | 2 in/min; ASTM D638 |
A. Schulman POLYFORT™ FPP 1182E Talc Filled, Extrusion Grade Copolymer Polypropylene DescriptionPolyfort® FPP 1182E is a 20% talc-filled, extrusion grade copolymer polypropylene. It had a good balance of flexural modulus, low temperature impact, and appearance properties. Informat.. |
|||
Tensile Strength, Yield | <= 27.6 MPa | <= 4000 psi | |
TSE Industries Millathane® 28 Millable Polyester Polyurethane Rubber Millathane 28 has excellent resistance to gas (e.g., nitrogen) permeability as well as very good abrasion resistance and low temperature properties. This polyurethane rubber was designed for automot.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with No Plasticizer MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | 2 in/min; ASTM D638 |
A. Schulman POLYFORT™ FPP 1182E Talc Filled, Extrusion Grade Copolymer Polypropylene DescriptionPolyfort® FPP 1182E is a 20% talc-filled, extrusion grade copolymer polypropylene. It had a good balance of flexural modulus, low temperature impact, and appearance properties. Informat.. |
|||
Tensile Strength, Yield | <= 27.6 MPa | <= 4000 psi | |
TSE Industries Millathane® CM High Temperature-Resistant Millable Polyester Polyurethane MILLATHANE HT is a polyester millable polyurethane which has the ability to withstand elevated temperatures. Polyurethanes have been known for their excellent resistance to abrasion, impact, tear st.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | ASTM D638 |
Dow C700-35N Polypropylene Impact Copolymer Resin OverviewGood mold fillabilityHigh stiffnessFast set-upContains a nucleating additiveComplies with: U.S. FDA FCN 843, Canadian HPFB No ObjectionDOW C700-35N Polypropylene Resin is intended for use in.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | ASTM D638 |
Asahi Kasei Thermofil P-40TC-5100 40% Talc Reinforced, Heat Stabilized Information provided by Asahi Thermofil |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | ASTM D638 |
Asahi Kasei Thermofil P-9900-1760 Unreinforced, Heat Stabilized, Impact Modified Information provided by Asahi Thermofil |
|||
Tensile Strength, Yield | >= 27.6 MPa | >= 4000 psi | ASTM D1708 |
Technetics Group Texolon™ 8764 PTFE
(Unverified Data**) A premium PTFE sheet manufactured from the highest quality PTFE.PTFE CharacteristicsChemical ResistanceThermal StabilityCryogenic PropertiesLow Coefficient of FrictionLow Surface EnergyLow Dielectri.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | 2" per min, Type IV; ASTM D638 |
Amco PRIMATOP HDPE 003955BAS Hexene Copolymer HDPE 003955BAS features excellent stiffness, stress crack resistance properties, and antistat. Applications include blow molding and sheet extrusion thermoforming.Former A-Top Polymers product; part.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | 2 in/min; ASTM D638 |
A. Schulman PP 3052X-01 Polypropylene Impact Resistant Copolymer DescriptionPolypropylene PP 3052X-01 is an extra high flow impact resistant copolymer with relatively high stiffness. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | TM R050-36 |
Resinlab® EP965SC-7 Clear Unfilled Electronic Grade Epoxy Encapsulant Resinlab™ EP965SC-7 Clear is a two part unfilled electronic grade epoxy encapsulant designed for medium sized castings. It cures at room temperature to a tough, semi-rigid polymer. It has good wett.. |
|||
Tensile Strength, Yield | 27.6 MPa | 4000 psi | ASTM D638 |
Polymer Resources PPX-SF1 Modified PPO, Structural Foam Grade, Easy Flow
(Unverified Data**) Process: Foam MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples. Foam grades tested with foamed parts with a 10% weight reduction rel.. |