Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Yield | 24.8 MPa | 3600 psi | ASTM D638 |
ExxonMobil Escorene® HD-6704 HDPE, Injection Grade
(discontinued **) Data Provided by Exxon Chemical Canada.Characteristics: Excellent Toughness, Excellent Stiffness, Excellent ESCRUses: Industrial containers, Industrial lids |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | ASTM D638 |
Chevron Phillips HiD® 9502H - 9503H High Performance Series HDPE Blow Molding Resin
(discontinued **) Resin Type: linear copolymerCharacteristics: outstanding ESCR, excellent impact resistance, medium molecular weight distribution, wide range of processing conditions, high melt strength, good pariso.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | ASTM D638 |
Albis Plastics Cellulose Acetate Butyrate B900 (Base Grade), 13% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | ASTM D638 |
Ineos Nova Zyntar® 7000 Flame Retardant Polystyrene Features:General purpose workhorse resinGood flow for injection moldingUL94 V-0 @ 1.5 mm for all colors UL94 5VA rating FOAMED @ 4.6 mm, 0.87-1.07 g/cc density, natural colorCustom colors availableA.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | ASTM D638 |
Ineos R08S-00 Polypropylene Random Copolymer This is a medium flow rate random copolymer designed for extrusion processing requiring slip properties and meets the requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | ASTM D638 |
Spartech EP5240 Calcium Carbonate Filled Homopolymer Provides the highest level of stiffness and heat resistance of filled olefins. Calcium Carbonate filled grades offer an excellent balance of stiffness and impact resistance. Typical applications inc.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | ASTM D638 |
Spartech EP6220 Filled and Reinforced Copolymer Filled copolymers offer a higher level of impact performance than homopolymer materials, and higher stiffness than unfilled copolymers. Copolymer based materials retain much of their impact strength.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | ASTM D638 |
Spartech SP-1510 Polyolefin Sheet Description: Polyolefin SheetInformation provided by Spartech. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | 2 in/min; ASTM D638 |
A. Schulman SUPERLINEAR™ XL 0370 Rotational Molding Resin DescriptionSuperlinear XL 0370 is compounded rotational molding resin based on metallocean catalyst technology. This technology allows for high impact and excellent stiffness. It is typically used.. |
|||
Tensile Strength, Yield | >= 24.8 MPa | >= 3600 psi | ASTM D638 |
Borealis Borstar® ME6053 Black Bimodal MD Polyethylene Compound for Jacketing of Communication and Power Cables Borstar ME6053 is a natural, bimodal medium-density polyethylene compound produced using the Borstar process. It is characterized by its tailor made properties important in jacketing applications, .. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | ASTM D638 |
A. Schulman LB502-01 High Molecular Weight, High-Density Polyethylene Copolymer DescriptionLP 502-01 Natural is a high molecular weight, high-density polyethylene copolymer, designed for blow molding of large parts where the finished product demands outstanding physical perform.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | ASTM D638 |
A. Schulman LB502-01 High Molecular Weight, High-Density Polyethylene Copolymer DescriptionLP 502-01 Natural is a high molecular weight, high-density polyethylene copolymer, designed for blow molding of large parts where the finished product demands outstanding physical perform.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | 2 in/min; ASTM D638 |
A. Schulman SUPERLINEAR™ XL 0370 Rotational Molding Resin DescriptionSuperlinear XL 0370 is compounded rotational molding resin based on metallocean catalyst technology. This technology allows for high impact and excellent stiffness. It is typically used.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | ASTM D638 |
A. Schulman LB502-01 High Molecular Weight, High-Density Polyethylene Copolymer DescriptionLP 502-01 Natural is a high molecular weight, high-density polyethylene copolymer, designed for blow molding of large parts where the finished product demands outstanding physical perform.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | |
TSE Industries Millathane® 5004 Millable Polyurethane Elastomer, Hardness 78A MILLATHANE 5004 is a millable polyurethane elastomer having excellent processing characteristics. MILLATHANE 5004 stocks can be readily processed on conventional rubber equipment. Vulcanization is c.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | ASTM D638 |
A. Schulman POLYFORT™ FPP 3716 Talc Filled Copolymer Polypropylene DescriptionPolyfort® FPP 3716 is a 12% talc filled copolymer polypropylene product. Information provided by A. Schulman. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | aged in air at 100ºC for 4 days |
TSE Industries Millathane® CM Millable Polyether Urethane Rubber with Benzoflex T-150 Plasticizer MILLATHANE CM is a sulfur and peroxide curable polyether urethane rubber. Its outstanding property is its great resistance to abrasion, which makes it of special interest for articles that are subje.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | 2 in/min; ASTM D638 |
ExxonMobil HDPE HPA 020 Molding High Density Polyethylene (HMW) Resin Product Description: HPA 020 is a high molecular weight HDPE resin, characterized by excellent balance of rigidity, ESCR and impact strength. Availability: Africa & Middle East, Asia Pacific and Eur.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | ASTM D638 |
Entec Hypro™ PPC-CC10 Natural Copolymer Polypropylene, 10% Calcium Carbonate Filled Information provided by Entec |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | Compression molded parts prepared according to ASTM D 1928 Procedure C.; ASTM D638 |
Dow CONTINUUM™ DGDC-2480 NT Bimodal Polyethylene Resin CONTINUUM™ DGDA-2490 NT is produced using UNIPOL™ II process technology. This product may be utilized for pipe applications where long term hydrostatic strength combined with outstanding resistan.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | 2 in/min (50 mm/min); ASTM D638 |
Bapolene® 3262 Polyethylene, Injection Grade Narrow molecular weight distribution injection molding resin. This resin offers intermediate flow, excellent ESCR, excellent impact and good warp resistance. This product meets FDA standards for f.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | 2 in/min (50 mm/min); ASTM D638 |
Bapolene® 3272 Polyethylene, Injection Grade Narrow molecular weight distribution injection molding resin. This high flow resin allows fast injection cycles and provides good impact strength, rigidity, and warpage resistance. This product me.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3590 psi | ASTM D412 |
ACC EP AEP EPI Engineered Polymers EP AEP is a new generation of Internetwork Polymers of polyurea and Epoxy, “Powered by Reactamine® Technology”. EP AEP was developed for a colorfast floor for both residential and industrial appl.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | 50 mm/min, Type IV; ASTM D638 |
Amco PRIMATOP HDPE HMW 1000950 High Molecular Weight Copolymer HDPE HMW 1000950 features good melt strength, excellent stress cracking resistance, good rigidity, and excellent impact strength. Applications include agricultural chemical tanks, pallets, and large.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | 2" (50mm) per min.; ASTM D638 Type IV |
Formosa Plastics Formolene® HB4903 Sheet and Thermoforming HDPE
(discontinued **) High Density Hexene CopolymerApplications: Fuel tanks, seating, garbage cans, sheet, large industrial containers.Formolene HB4903 is a high performance copolymer that is designed for the most demand.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | ASTM D638 |
Albis Plastics Cellulose Acetate Butyrate B901 (UV Inhibitor Added), 13% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | ASTM D638 |
Albis Plastics Cellulose Acetate Butyrate B902 (UV Inhibitor Added), 13% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | ASTM D638 |
Albis Plastics Cellulose Acetate Butyrate B9024 (UVI, Odor Mask Added), 13% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | 2" (50mm) per min.; ASTM D638 Type IV |
Formosa Plastics Formolene® HL5010 Blow Molding HDPE Extra High Molecular Weight Hexene CopolymerApplications: Blow Molded 55-gallon shipping containers, gasoline tanks, agricultural chemical tanks; Extruded pallets, cattle feeders, large formed parts.. |
|||
Tensile Strength, Yield | 24.8 MPa | 3600 psi | Type 1 - Rigids, Yield, 0.2 in/min; ASTM D638 |
PolyOne Elastamax® HTE 2101 Thermoplastic Elastomer - PVC/TPU
(discontinued **) Description/Features:InteriorUL 94 V0Applications:General PurposeCustom Profiles-ComplexProcessing Method:Extrusion-Single ScrewInformation provided by PolyOne Corporation. |