Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Formosa Plastics Formolene® HL5010 Blow Molding HDPE

Category Polymer , Thermoplastic , Polyethylene (PE) , HDPE , High Density Polyethylene (HDPE), Blow Molding Grade
Manufacturer Formosa Plastics Corporation, USA
Trade Name Formolene®
Port Ningbo port,China
Trade Terms FOB, CFR, CIF
Payment Terms L/C, T/T, Western Union
Download PDF Formosa Plastics Formolene® HL5010 Blow Molding HDPE.pdf
Price EMAIL US    sales@lookpolymers.com
  Online Service   lookpolymers   27660005
Material Notes:
Extra High Molecular Weight Hexene CopolymerApplications: Blow Molded 55-gallon shipping containers, gasoline tanks, agricultural chemical tanks; Extruded pallets, cattle feeders, large formed parts, boatsFormolene HL5010 has good melt strength, excellent stress crack resistance, good rigidity, and excellent impact strength even at low temperatures. These properties make HL5010 an excellent resin for large part blow molding applications.Produced using licensor formulation for HXM 50100. Licensor does not warrant or imply that this product meets their specifications for HXM 50100.Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact.Nominal properties reported herein were determined on compression molded specimens prepared in accordance with Procedure C of ASTM D1928. Physical properties are typical of product but do not reflect normal testing variance and therefore should not be used for specification purposes.Information provided by Formosa Plastics Corporation, USA.
Physical Properties Metric English Comments
Density 0.949 g/cc
0.0343 lb/in³
ASTM D1505
Environmental Stress Crack Resistance >= 600 hour
>= 600 hour
Condition A (100% Igepal), F<sub>50</sub>; ASTM D1693
>= 600 hour
>= 600 hour
Condition B (10% Igepal), F<sub>50</sub>; ASTM D1693
High Load Melt Index 10 g/10 min

@Load 21.6 kg,
Temperature 190 °C
10 g/10 min

@Load 47.6 lb,
Temperature 374 °F
ASTM D1238
Mechanical Properties Metric English Comments
Tensile Strength, Yield 24.8 MPa
3600 psi
2" (50mm) per min.; ASTM D638 Type IV
Elongation at Break >= 600 %
>= 600 %
2" (50mm) per min.; ASTM D638 Type IV
Flexural Modulus 1.17 GPa
170 ksi
ASTM D790
Thermal Properties Metric English Comments
Brittleness Temperature <= -90.6 °C
<= -131 °F
ASTM D746
Copyright © lookpolymers.com All Rights Reserved