- HOME
- POLYMER SEARCH
- Thermoset
- Epoxy
- ACC EP AEP EPI Engineered Polymers
ACC EP AEP EPI Engineered Polymers
| Category | Polymer , Thermoset , Epoxy |
| Manufacturer | Amber Chemical Company |
| Trade Name | |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | ACC EP AEP EPI Engineered Polymers.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
EP AEP is a new generation of Internetwork Polymers of polyurea and Epoxy, “Powered by Reactamine® Technology”. EP AEP was developed for a colorfast floor for both residential and industrial applications. Gel times are fast, around 15 minutes, and a tack free floor can be as fast as 45 minutes. A Broadcast or Trowl down floor can be easily made using EP AEP. EP AEP requires no primer and acts as its own top coat. EP AEP meet USDA and FDA indirect food contact. EP AEP is also available in antimicrobial formulas. Applications AIRCRAFT HANGAR FLOORS LOW TEMPERATURE FREEZERS MAINTENANCE FACILITIES FLOORS REQUIRING UV STABILITY UV-STABLE TOP COAT INDUSTRIAL SHOP FLOORS NON-CONDUCTIVE FLOORING FOOD PROCESSING FACILITIESPart of the Amber Chemical Group. Data provided by manufacturer.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Viscosity | 1100 cP @Temperature 75.0 °C |
1100 cP @Temperature 167 °F |
A Side |
| 1575 cP @Temperature 75.0 °C |
1575 cP @Temperature 167 °F |
B Side |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore D | 45 | 45 | ASTM 2240 |
| Tensile Strength, Yield | 24.8 MPa | 3590 psi | ASTM D412 |
| Elongation at Break | 200 % | 200 % | ASTM D412 |
| Adhesive Bond Strength | >= 1.72 MPa | >= 250 psi | Wood (no primer), Delamination; ASTM D4541 Elcometer |
| >= 2.07 MPa | >= 300 psi | Concrete (no primer) Concrete Failure; ASTM D4541 Elcometer | |
| >= 2.07 MPa | >= 300 psi | Concrete (primer), Concrete Failure; ASTM D4541 Elcometer | |
| >= 2.07 MPa | >= 300 psi | Concrete (epoxy), Concrete Failure; ASTM D4541 Elcometer | |
| >= 6.21 MPa | >= 900 psi | Steel (no primer), Substrate Failure; ASTM D4541 Elcometer | |
| >= 10.3 MPa | >= 1500 psi | Steel (epoxy primer), Primer Failure; ASTM D4541 Elcometer | |
| Tear Strength | 78.9 kN/m | 450 pli | ASTM D412 |
| Taber Abrasion, mg/1000 Cycles | 45 | 45 | CS17 WHEEL, 1kg per 1000 cycles; ASTM D4060 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Flash Point | >= 93.3 °C | >= 200 °F | ASTM Pensky-Martin |
| Processing Properties | Metric | English | Comments |
|---|---|---|---|
| Cure Time | >= 45.0 min | >= 0.750 hour | Tack Free Time |
| Pot Life | 15 min | 15 min |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Color | All primary colors. | |
| Flexibility | Pass | ASTM D1737, 1/8"Mandrel |
| Resistance to 1,1,1-Trichlorethane | Conditional | |
| Resistance to Acetic Acid (100%) | Conditional | |
| Resistance to Acetone | Conditional | |
| Resistance to Ammonium Hydroxide (50%) | Recommended Conditional | |
| Resistance to Benzene | Conditional | |
| Resistance to Brine-Saturated H2O | Recommended | Resistance to Brine-Saturated H<sub>2</sub>O (310g/l) |
| Resistance to Chlorinated H2O | Recommended | |
| Resistance to Clorox® (10%) H2O | Recommended | |
| Resistance to Diesel Fuel | Recommended Conditional | |
| Resistance to Gasoline | Recommended Conditional | |
| Resistance to Gasoline/ 5% Methanol | Recommended Conditional | |
| Resistance to Gasoline/5% MTBE | Recommended Conditional | |
| Resistance to H2O | Recommended | |
| Resistance to H2O (14 days at 82°C) | Recommended Conditional | |
| Resistance to Hydraulic Fluid (oil) | Recommended Conditional | |
| Resistance to Hydrochloric Acid (20%) | Recommended | |
| Resistance to Hydrofluoric Acid(10%) | Not Recommended | |
| Resistance to Isopropyl Alcohol | Recommended | |
| Resistance to Lactic Acid | Recommended Conditional | |
| Resistance to MEK | Recommended Conditional | |
| Resistance to Methanol | Recommended | |
| Resistance to Methylene chloride | Conditional | |
| Resistance to Mineral Spirits | Recommended Conditional | |
| Resistance to Motor Oil | Recommended | |
| Resistance to MTEB | Conditional | |
| Resistance to Muriatic Acid (10%) | Recommended | |
| Resistance to NaCl/H2O (10%) | Recommended | |
| Resistance to Nitric Acid (20%) | Not Recommended | |
| Resistance to Phosphoric Acid (10%) | Recommended | |
| Resistance to Phosphoric Acid (50%) | Not Recommended | |
| Resistance to Potassium Hydroxide (10%) | Recommended | |
| Resistance to Potassium Hydroxide (20%) | Recommended, Discoloration | |
| Resistance to Propylene Carbonate | Recommended Conditional | |
| Resistance to Skydrol® | Conditional | |
| Resistance to Sodium Bicarbonate | Recommended | |
| Resistance to Sodium Hydroxide (25%) | Recommended | |
| Resistance to Sodium Hydroxide (50%) | Recommended, Discoloration | |
| Resistance to Sodium Hypochlorite (10%) | Recommended | |
| Resistance to Stearic Acid | Recommended | |
| Resistance to Sugar/H2O | Recommended | |
| Resistance to Sulfuric Acid (>50%) | Recommended Conditional | |
| Resistance to Sulfuric Acid (10%) | Recommended | |
| Resistance to Toluene | Recommended | |
| Resistance to Trisodium Phosphate | Recommended | |
| Resistance to Vinegar/ H2O (5%) | Recommended | |
| Resistance to Xylene | Recommended Conditional |
Users viewing this material also viewed the following:
- PSM Industries Pacific Sintered Metals Iron F-241-S1 Powdered Metal
- Polymer Resources PC-HM-FR2-[color]-4 Polycarbonate, 10% Glass Reinforced, Flame Retardant, UV-stabilized with Mold Release
- Ipiranga Petrochem GM 8260 HDPE
- A. Schulman PP 1498-01 Polypropylene Medium Impact Copolymer Polypropylene
- Polyram PlusTek PA840G7 Nylon 6.6 for Injection Molding, 35% Glass Fibers Reinforced, Impact Modified
- CP-Polymer-Technik Wellamid® 6600 GV 25 HWCP 25% Glass Fiber Nylon 66, Heat Stabilized, Conditioned
- Beijing Ranger Chem E-52D Liquid Epoxy Resin
- TSE Industries Millathane® CM Millable Polyether Urethane Rubber with 20 PHR N650 Filler
- ExxonMobil Escorene™ AD 0633EH2 Ethylene Vinyl Acetate Copolymer (European Grade)
- Zhejiang Juner PC/ABSz-4 Alloy
Copyright © lookpolymers.com All Rights Reserved