Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Tensile Strength at Break = 22500 psi Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Mechanical Properties Metric English Comments
Tensile Strength at Break 155 MPa
22500 psi
ISO 527
Nilit FRIANYL A63 FK 2010 Nylon 6.6 for injection molding, 20% glass fiber and 10% glass ball reinforced
Nylon 6.6 for injection moldingInformation provided by Frisetta Polymer, which merged into Nilit Plastics
Tensile Strength at Break <= 155 MPa
<= 22500 psi
ISO/R527
Polykemi AB SCANMID 6 B12^ F25 Nylon 6, Glass Fiber Reinforced
Information provided by Polykemi AB
Tensile Strength at Break 155 MPa
22500 psi
Radici Radilon® S RV250 (dry) Nylon 6
Radilon® S is a range of polyamide 6 (PA6) products obtained through the polymerization of caprolactam and used for injection, extrusion and blow-molding.Information provided by Radici group.
Tensile Strength at Break 155 MPa

@Temperature 23.0 °C
22500 psi

@Temperature 73.4 °F
DAM; 5mm/min; ISO 527
DuPont Performance Polymers Zytel® FE270050 BK099 Nylon 66  (Unverified Data**)
Zytel® FE270050 BK099 is a 30% glass reinforced, polyamide 66 resin for gas and water assisted injection molding.Information provided by DuPont
Tensile Strength at Break 155 MPa
22500 psi
10mm/min; ASTM D638
Kingfa PA66-RG301 Flame Retardant, 30% Glass Fiber Reinforced PA66
Features:Flame retardantHigh strengthHigh temperature propertiesGood electric propertiesNo bloomingApplications:Injection moldingConnectorsRelayBobbinsPlugsInformation Provided by Kingfa Sci. & Tech..
Tensile Strength at Break 155 MPa
22500 psi
ISO 527
Grupo Repol Dinalon® B1S25 G25 25% Glass Fiber Reinforced Nylon 6
Mechanical properties are for dry as molded samples.Information provided by Grupo Repol.
Tensile Strength at Break 155 MPa
22500 psi
d.a.m.; ISO 527-1, -2; 5 mm/min
Lanxess Durethan® BKV 130 DUS008 901510 Nylon 6, Glass Fiber Reinforced, Impact Modified
PA 6, 30% glass fibers, injection molding, impact modifiedInformation provided by LANXESS.
Tensile Strength at Break 155 MPa
22500 psi
ISO 527 Type 1A
Solvay TECHNYL® A 218 V40 Black 21 NHFE PA66, 40% glass fiber, Conditioned
Description: Polyamide 66, offering high flowability and productivity gains, reinforced with 40% of glass fiber, heat stabilized, for injection molding.Available in: EuropeProduct Applications: TECH..
Tensile Strength at Break 155 MPa
22500 psi
ASTM D638
SABIC Innovative Plastics LNP LUBRICOMP RFN16 PA 6
LNP* LUBRICOMP* RFN16 is a compound based on Nylon 66 resin containing 30% Glass Fiber, 5% MOS2. Added features of this material include: Wear Resistant.
Tensile Strength at Break 155 MPa
22500 psi
ASTM D638
SABIC Innovative Plastics LNP LUBRICOMP RFN16 PA 6 (Asia Pacific)
LNP* Lubricomp* RFN16 is a compound based on Nylon 6 resin containing Glass Fiber, MOS2. Added features of this material include: Internally Lubricated.
Tensile Strength at Break 155 MPa
22500 psi
Type I, 5 mm/min; ASTM D638
SABIC Innovative Plastics ULTEM AR9300 PEI (Asia Pacific)
30% Glass fiber filled, standard flow Polyetherimide (Tg 217C). Meets FAR 25.853 and OSU 65/65 with low toxicity, smoke, and flame evolution. ECO Conforming.
Tensile Strength at Break 155 MPa
22500 psi
ISO 527
SABIC Innovative Plastics LNP THERMOCOMP LF008 PEEK
LNP* THERMOCOMP* LF008 is a compound based on Polyetheretherketone resin containing 40% Glass Fiber.
Tensile Strength at Break 155 MPa
22500 psi
5 mm/min; ISO 527
SABIC Innovative Plastics NORYL EXNL1285 PPE+PS (Europe-Africa-Middle East)
Noryl* EXNL1285 Polyphenylene Oxide (PPO) + Polystyrene (PS) resin is a 40 % Glass Reinforced, injection moldable grade with improved hydrolytic stability and with a Tensile Modulus > 11000 MPa; thi..
Tensile Strength at Break 155 MPa
22500 psi
ASTM D638
Chase Plastics CP Pryme® N340HSL (DAM) Nylon 6 (Utility Grade), 40% Glass Fiber Reinforced, Heat Stabilized, Internally Lubricated
Information provided by Chase Plastics.
Tensile Strength at Break 155 MPa
22500 psi
ISO 527-93
Wellman Wellamid® GF30-60 XE-WBK Nylon 6, 30% Glass Reinforced, Weatherable
All information provided by Wellman Engineered Resins.
Tensile Strength at Break 155 MPa
22500 psi
ASTM D638
Toyobo VYLOPET® EMC341 Injection Molding Polyester Resin, Hydrolysis Resistant
Applications: Electric rice cooker partsBathroom appliancesFeatures: Good hydrolysis resistanceInformation provided by Toyobo.
Tensile Strength at Break 155 MPa
22500 psi
dry; ISO 527-1/-2
EMS-Grivory Grivory® 2SV-30H black 9992 PA610-GF30
Product Description: GRILAMID XE 3976 black 9992 is a 30% glass fiber reinforced, heat stabilized polyamide 610 injection molding grade. This product is to a large extent based on renewable raw mate..
Tensile Strength at Break 155 MPa
22500 psi
dry; ISO 527-1/-2
EMS-Grivory Grivory® 2SV-30H nat PA610-GF30
Product Description: GRILAMID XE3976 natural 9992 is a 30% glass fiber reinforced, heat stabilized polyamide 610 injection molding grade. This product is to a large extent based on renewable raw mat..
Tensile Strength at Break 155 MPa
22500 psi
dry; ISO 527-1/-2
EMS-Grivory Grivory® LV-5H PA12-GF50
Product description: Grilamid LV-5H is a 50% glass fiber reinforced, heat stabilized polyamide 12 injection molding grade with the following product profile: very low water absorptionhigh dimensiona..
Tensile Strength at Break 155 MPa
22500 psi
conditioned; ISO 527-1/-2
EMS-Grivory Grivory® TSG-60 PA666-GF60
Product description: Grilon TSG-60 is a heat stabilized, normal viscosity PA66 + PA6 injection molding grade with 60% glass fibers. Grilon TSG-60 has the following important properties: Very high st..
Tensile Strength at Break 155 MPa
22500 psi
dry; ISO 527-1/-2
EMS-Grivory Grivory® XE 3915 PA12-GF50
Product description: Grilamid XE 3915 is a 50% glass fiber reinforced, heat stabilized polyamide 12 injection molding grade with the following produce profile:Good UV StabilityHigh impact strengthVe..
Tensile Strength at Break 155 MPa
22500 psi
50%RH; ISO 527-1/-2
DuPont Performance Polymers Zytel® HTN FR52G45BL BK337 Polyphthalamide (PPA)  (Unverified Data**)
45% Glass Reinforced Flame Retardant PPA High Performance Polyamide Zytel HTNFR52G45BL BK337 is a 45% glass reinforced flame retardant lubricated high performance polyamide resin that has been devel..
Tensile Strength at Break 155 MPa
22500 psi
ISO 527
Eurotec® Tecodur® PB70 GR50 NL PBT 50% glass fiber reinforced
Excellent stiffness and hardnessGood mechanical strengthGood creep and fatigue behaviorVery good thermal stabilityExcellent flammability characteristicsGood electrical propertiesHigh wear resistance..
Tensile Strength at Break 155 MPa
22500 psi
ASTM D638
Beijing Chemical Industry KAIFA® MN201-G35 Nylon 66 Resin
35% glass fiber reinforced, thermal resistantInformation provided by Beijing Chemical Industry Research Institute (Group)
Tensile Strength at Break 155 MPa
22500 psi
conditioned; ISO 527-1/-2
EMS-Grivory Grivory® BG-50 FC PA6-GF50
Product description: Grilon BG-50 FC is a heat stabilized PA6 injection molding grade with 50% glass fibers. Grilon BG-50 FC has the following important properties: Short cycle timesExcellent surfac..
Copyright © lookpolymers.com All Rights Reserved