Polymer Property : Charpy Impact Unnotched = 76.1 ft-lb/in² Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Charpy Impact Unnotched	16.0 J/cm²	76.1 ft-lb/in²	Edgew 80103 sp=62mm; ISO 179/1eU
SABIC Innovative Plastics Lexan® LUX7189 PC (Europe-Africa-Middle East) Lexan* LUX7189 is an injection moldable, high light reflectance FR grade. Contains non-brominated, non-chlorinated flame retardant systems.
Charpy Impact Unnotched	16.0 J/cm² @Temperature -30.0 °C	76.1 ft-lb/in² @Temperature -22.0 °F	Edgew 80103 sp=62mm; ISO 179/1eU
SABIC Innovative Plastics Lexan® LUX7189 PC (Europe-Africa-Middle East) Lexan* LUX7189 is an injection moldable, high light reflectance FR grade. Contains non-brominated, non-chlorinated flame retardant systems.
Charpy Impact Unnotched	<= 16.0 J/cm² @Temperature -30.0 - -30.0 °C	<= 76.1 ft-lb/in² @Temperature -22.0 - -22.0 °F	Average value: 14.0 J/cm² Grade Count:2
Overview of materials for Polystyrene, Molded, Unreinforced This property data is a summary of similar materials in the MatWeb database for the category "Polystyrene". Each property range of values reported is minimum and maximum values of appropriate MatWeb..
Charpy Impact Unnotched	16.0 J/cm²	76.1 ft-lb/in²
Polimeri Europa EDISTIR SRL800/N High Impact Polystyrene (HIPS) (discontinued **) Symbol according to ISO 1043-1: S/B Designation: Thermoplastic ISO 2897-SB,G,093-06-07-12 Very high environmental stress cracking resistant (VH ESCR) modified HIPS. It exhibits high toughness and ..
Charpy Impact Unnotched	16.0 J/cm²	76.1 ft-lb/in²
Polimeri Europa SINKRAL G320 ABS (discontinued **) Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,095-15-16-25 General purpose injection moulding grade with good impact resistance, good flow and high gloss. SI..
Charpy Impact Unnotched	16.0 J/cmÂ² @Temperature -30.0 Â°C	76.1 ft-lb/inÂ² @Temperature -22.0 Â°F	ISO 179/1e
Aardvark Polymers AARTELÂ® 850IM Rotational Molding Resin Aartel 850 IM is a moderately toughened impact modified acetal copolymer which exhibits ductility in bending and impact loading. The ductile, rather than brittle, failure mode gives designers more f..
Charpy Impact Unnotched	16.0 J/cmÂ²	76.1 ft-lb/inÂ²	ISO 179-1eU
Ineos ABS TriaxÂ® 3158 ABS + Polyamide Blend (DAM), PA66/ABS Pellets (filled) TriaxÂ® 3158 is a PA+ABS-Blend and on-line paintable (195Â°C). It has very high heat resistance, reduced moisture, improved impact strength, and a low coefficient of linear thermal expansion. It..
Charpy Impact Unnotched	16.0 J/cmÂ² @Temperature 23.0 Â°C	76.1 ft-lb/inÂ² @Temperature 73.4 Â°F	80x10x4mm; ISO 179/1eU
SYNTHOS ForsanÂ® 573 L Acrylonitrile Butadiene Styrene (ABS) Increased heat resistant, glossy, UV stabilized.Applications: Electrotechnics, automotiveHousehold appliances, office equipment, car interior parts, profiles, ABS sheets, etc.Synthos was formerly kn..
Charpy Impact Unnotched	16.0 J/cmÂ²	76.1 ft-lb/inÂ²	ISO 179
Styrolution TerblendÂ® N 3158 ASA / PA, 9% Mineral filled TerblendÂ® N 3158 is an 9% mineral-filled ABS/PA blend with good dimensional stability, enhanced rigidity and excellent heat resistance, so that this grade can be applied for online-painting.High ..
Charpy Impact Unnotched	16.0 J/cm² @Temperature -30.0 °C	76.1 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
DuPont Performance Polymers Delrin® 500TL NC010 Acetal (POM) (Unverified Data**) Teflon® Lubricated Medium Viscosity Acetal Homopolymer with Low Wear and Low Friction Delrin 500TL is a medium viscosity acetal homopolymer resin containing 1.5% Teflon PTFE Micropowder. It is desi..
Charpy Impact Unnotched	16.0 J/cm² @Temperature -30.0 °C	76.1 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
DuPont Performance Polymers Delrin® 911DP BK402 Acetal (POM) (Unverified Data**) Nucleated Low Viscosity Acetal Homopolymer Delrin 911DP is a low viscosity acetal homopolymer with improved thermal stability and modifications for more precise molding (reduced warpage less shrinka..
Charpy Impact Unnotched	16.0 J/cm²	76.1 ft-lb/in²	ISO 179/1eU
DuPont Performance Polymers Delrin® 911DP NC010 Acetal (POM) (Unverified Data**) Nucleated Low Viscosity Acetal Homopolymer Delrin 911DP is a low viscosity acetal homopolymer with improved thermal stability and modifications for more precise molding (reduced warpage less shrinka..
Charpy Impact Unnotched	16.0 J/cm² @Temperature -30.0 °C	76.1 ft-lb/in² @Temperature -22.0 °F	ISO 179/1eU
DuPont Performance Polymers Delrin® FG500TL NC010 Acetal (POM) (Unverified Data**) Teflon® Lubricated Medium Viscosity Acetal Homopolymer with Low Wear and Low Friction Developed for Food Contact ApplicationsDelrin FG500TL medium viscosity acetal homopolymer resin containing 1.5%..
Charpy Impact Unnotched	16.0 J/cm²	76.1 ft-lb/in²
BASF Novolen® 2248 TC Polypropylene Nucleated grade with antistatic agent for injection moldings.Data was collected by ISO methods and provided by BASF.
Charpy Impact Unnotched	16.0 J/cm² @Temperature -30.0 °C	76.1 ft-lb/in² @Temperature -22.0 °F
BASF Polystyrol® 486 M Impact Grade Polystyrene (Europe) Normal flowing, high-impact grade that is especially suitable for blends with a high proportion of general-purpose Polystyrol (preferably Polystyrol 165 H). Suitable for dairy packaging.Data was co..
Charpy Impact Unnotched	16.0 J/cm² @Temperature -30.0 °C	76.1 ft-lb/in² @Temperature -22.0 °F
BASF Procom® D 1118 Polypropylene Data was collected by ISO methods and provided by BASF.
Charpy Impact Unnotched	16.0 J/cm² @Temperature -30.0 °C	76.1 ft-lb/in² @Temperature -22.0 °F
Polimeri Europa SINKRAL C443 ABS, Heat Stabilized (discontinued **) Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,105-08-25-20 Medium heat injection moulding grade. The availability of different industrial processes to manufa..
Charpy Impact Unnotched	16.0 J/cm²	76.1 ft-lb/in²
Polimeri Europa SINKRAL G323 ABS (discontinued **) Symbol according to ISO 1043-1: ABS Grade designation according to ISO 2580-ABS 1,MG,095-15-16-20 General purpose injection moulding grade. Main properties are: good impact resistance high flow e..