- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 46
- Nylon 46, Unreinforced
- DSM Stanyl® TW371 (DAM) Nylon 46 Heat Stabilized, PTFE Lubricated (North America)
DSM Stanyl® TW371 (DAM) Nylon 46 Heat Stabilized, PTFE Lubricated (North America)
| Category | Polymer , Thermoplastic , Nylon , Nylon 46 , Nylon 46, Unreinforced |
| Manufacturer | DSM Engineering Plastics |
| Trade Name | Stanyl® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | DSM Stanyl® TW371 (DAM) Nylon 46 Heat Stabilized, PTFE Lubricated (North America).pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Information provided by DSM Engineering Plastics.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.25 g/cc | 0.0452 lb/in³ | ISO 1183 |
| Moisture Absorption at Equilibrium | 3.2 % | 3.2 % | 50% RH / 23°C; Similar to ISO 62 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Tensile Strength, Yield | 90.0 MPa | 13100 psi | ISO 527-1/-2 |
| Elongation at Yield | 25 % | 25 % | Nominal; ISO 527-1/-2 |
| Tensile Modulus | 2.90 GPa | 421 ksi | ISO 527-1/-2 |
| Charpy Impact, Notched | 0.500 J/cm² | 2.38 ft-lb/in² | ISO 179/1eU |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 80.0 µm/m-°C @Temperature 20.0 °C |
44.4 µin/in-°F @Temperature 68.0 °F |
ISO 11359-1/-2 |
| CTE, linear, Transverse to Flow | 100 µm/m-°C @Temperature 20.0 °C |
55.6 µin/in-°F @Temperature 68.0 °F |
ISO 11359-1/-2 |
| Melting Point | 295 °C | 563 °F | ISO 11357-1/-3 |
| Deflection Temperature at 1.8 MPa (264 psi) | 190 °C | 374 °F | ISO 75-1/-2 |
| Flammability, UL94 | HB @Thickness 3.00 mm |
HB @Thickness 0.118 in |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+12 ohm-cm | 1.00e+12 ohm-cm | IEC 60093 |
| Comparative Tracking Index | 400 V | 400 V | IEC 60112 |
Users viewing this material also viewed the following:
- Nylene® Vexel™ B12GF45 , 45% Glass Reinforced PBT
- PSM Industries Pacific Sintered Metals Iron F-241-S1 Powdered Metal
- Cookson Group Plaskon® SMT-B-1RC (146.403) Epoxy Molding Compound for PBGAs (discontinued **)
- Lucky IG-840 Acrylic, Injection Grade
- Lehmann & Voss LUVOCOM® 1105-7709/RD PEEK, unreinforced
- Mateck Neodymium Gallate Substrate, NdGaO3
- Lubrizol Advanced Materials Pearlstick® 48-60/25 Linear Thermoplastic Polyurethane Elastomer
- A. Schulman POLYBATCH™ Grey LL80316/3 Concentrate Based In LLDPE
- Arkema Group Orgalloy® LE 60LMES Flexible Nylon Alloy (Conditioned)
Copyright © lookpolymers.com All Rights Reserved