Physical Properties | Metric | English | Comments |
---|---|---|---|
Melt Flow | 0.20 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.20 g/10 min @Load 4.76 lb, Temperature 374 °F |
ISO 1133 |
Polimeri Europa Eraclene® BC 86 High Density Polyethylene - Blow Molding Eraclene BC 86 is a high density polyethylene resin (HDPE) with antioxidants, suitable for blow molding application. It is especially recommended for the production of containers up to 20 liters.Er.. |
|||
Melt Flow | 0.20 g/10 min @Load 2.16 kg, Temperature 150 °C |
0.20 g/10 min @Load 4.76 lb, Temperature 302 °F |
Procedure A Condition C; ASTM D1238 |
Network Polymers Softflex® 0250 Description: Softflex® Thermoplastic Elastomer AlloyInformation provided by Network Polymers Inc. |
|||
Melt Flow | 0.20 g/10 min @Load 1.00 kg, Temperature 235 °C |
0.20 g/10 min @Load 2.20 lb, Temperature 455 °F |
Procedure A Condition Q; ASTM D1238 |
Network Polymers Softflex® 5300 Description: Softflex® Thermoplastic Elastomer AlloyInformation provided by Network Polymers Inc. |
|||
Melt Flow | 0.20 g/10 min @Load 2.16 kg, Temperature 230 °C |
0.20 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
Premix Thermoplastics PRE-ELEC® PP 1378 PRE-ELEC PP 1378 is a conductive thermoplastic compound based on glass-fiber reinforced polypropylene. Conductivity is achieved by using special conductive carbon black. In addition to a low electri.. |
|||
Melt Flow | 0.20 - 0.35 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.20 - 0.35 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1283/L |
NIZHNEKAMSKNEFTEKHIM PE 4850B (504H3) High Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer |
|||
Melt Flow | 0.20 - 0.35 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.20 - 0.35 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1283/L |
NIZHNEKAMSKNEFTEKHIM PE 4851B (504H3) High Density Polyethylene Product obtained by gas phase polymerization of ethylene in presence of complex metalorganic catalysts.Information provided by manufacturer |
|||
Melt Flow | 0.20 - 0.40 g/10 min @Load 2.16 kg, Temperature 230 °C |
0.20 - 0.40 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238/L |
NIZHNEKAMSKNEFTEKHIM PP 1532B (YD50G) Propylene Homopolymer Product obtained by polymerization of propylene in presence of complex metalorganic catalysts. It incorporates increased long-term thermal stability, thermal-oxidative degradation resistance when P.. |
|||
Melt Flow | 0.20 - 0.40 g/10 min @Load 2.16 kg, Temperature 230 °C |
0.20 - 0.40 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238/L |
NIZHNEKAMSKNEFTEKHIM PP 4132B (PA14D) Propylene and Ethylene Copolymer Product obtained by copolymerization of propylene with ethylene in presence of complex metalorganic catalysts. It incorporates very high long-term thermal stability, thermal-oxidative degradation r.. |
|||
Melt Flow | 0.20 g/10 min @Load 2.16 kg |
0.20 g/10 min @Load 4.76 lb |
ISO 1133 |
Total Lacqtene® 2003 PBK 41 HDPE pipe, sheet
(discontinued **) LACQTENE® 2003 PBK 41 is a high density polyethylene produced by the gas phase polymerization process with hexene as comonomer. LACQTENE® 2003 PBK 41 is a black compound especially developed for i.. |
|||
Melt Flow | 0.20 - 0.40 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.20 - 0.40 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
Forever Plast Namtene® 1002 Recycled Pipe Grade HDPE Namtene® 1002 is used for pipes. It features a lower polypropylene content than standard Namtene®. |
|||
Melt Flow | 0.20 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.20 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
Ineos TUB 172 HDPE TUB 172 is a yellow medium density polyethylene copolymer designed specifically for the extrusion of natural gas pipe. It exhibits excellent long term stress life and slow crack growth resistance. T.. |
|||
Melt Flow | 0.20 g/10 min @Load 5.00 kg, Temperature 190 °C |
0.20 g/10 min @Load 11.0 lb, Temperature 374 °F |
ISO 1133 |
Iran Petrochemical (PCC) BL5 HM 7746 High Density Polyethylene BL5 (HM 7746) is a high density polyethylene with Butene-1 as comonomer. It is a high molar mass, very good impact strength and optimum stress cracking resistance.Applications: large containers abov.. |
|||
Melt Flow | 0.20 g/10 min @Load 2.16 kg, Temperature 250 °C |
0.20 g/10 min @Load 4.76 lb, Temperature 482 °F |
ASTM D1238 |
SABIC Innovative Plastics Xenoy® X5410 PC+PET (Europe-Africa-Middle East) Mineral filled PC+PET resin with high heat dimensional stability for paint systems. It has very low CTE and excellent flow - impact balance for automotive exterior applications, like body panels, ta.. |
|||
Melt Flow | 0.20 g/10 min @Load 2.16 kg |
0.20 g/10 min @Load 4.76 lb |
ISO 1133 |
SIDPEC EGYPTENE® HD 5402 EA HDPE Pipe Grade Applications:Ducting pipeDrainage PipeNon-pressure pipeInformation provided by Interchim s.r.l., official distributor of Sidi Kerir Petrochemicals Co. (SIDPEC) Products |
|||
Melt Flow | 0.20 g/10 min @Load 2.16 kg, Temperature 250 °C |
0.20 g/10 min @Load 4.76 lb, Temperature 482 °F |
ASTM D 1238 |
SABIC Innovative Plastics Xenoy® X5410 PC+PET Mineral filled PC+PET resin with high heat dimensional stability for paint systems. It has very low CTE and excellent flow - impact balance for automotive exterior applications, like body panels, ta.. |
|||
Melt Flow | 0.20 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.20 g/10 min @Load 4.76 lb, Temperature 374 °F |
ISO 1133 |
Borealis Borstar® FB2230 LLDPE for Film Borstar BF2230 is a high molecular weight low density polyethylene film grade combining good and flexible extrusion behavior, excellent draw down and superior mechanical properties. Film made from .. |
|||
Melt Flow | 0.20 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.20 g/10 min @Load 4.76 lb, Temperature 374 °F |
ISO 1133 |
Borealis Borstar® ME3440 Black Medium Density Polyethylene for Pressure Pipes Borstar ME3440 is a black, bimodal medium density polyethylene compound classified as a MRS 8.0 material (PE80), with optimum balance between flexibility and strength, produced with the advanced Bor.. |
|||
Melt Flow | 0.20 g/10 min @Load 2.16 kg |
0.20 g/10 min @Load 4.76 lb |
ASTM D 1238 |
Total 3802 Blue MDPE pipe, injection molding FINATHENE® 3802 Blue is a polyethylene copolymer based on C6 hexene as co-monomer and is produced by a continuous low pressure slurry polymerization process. FINATHENE® 3802 Blue is a blue polyeth.. |
|||
Melt Flow | 0.20 g/10 min @Load 5.00 kg, Temperature 190 °C |
0.20 g/10 min @Load 11.0 lb, Temperature 374 °F |
ASTM D1238 |
Total HDPE XT10B High Density Polyethylene, Pipe Resin Polyethylene: HDPE Bimodal PE4710 pipe resin (Black)Characteristics:Outstanding high temperature creep rupture strengthOutstanding slow crack growth resistanceExcellent resistance to rapid crack pr.. |
|||
Melt Flow | 0.20 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.20 g/10 min @Load 4.76 lb, Temperature 374 °F |
ISO 1133/D |
Total MDPE 3802 B Medium Density Polyethylene, Cable MDPE 3802 B is a black medium density polyethylene particularly suited for cable sheathing applications and designed to meet the requirements for telecommunication and power cables (medium and high .. |
|||
Melt Flow | 0.20 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.20 g/10 min @Load 4.76 lb, Temperature 374 °F |
ISO 1133/D |
Total MDPE 3802 Medium Density Polyethylene, Cable MDPE 3802 is a natural medium density polyethylene particularly suited for colored cable sheathing applications and designed to meet the requirements for telecommunication and power cables (medium a.. |
|||
Melt Flow | 0.20 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.20 g/10 min @Load 4.76 lb, Temperature 374 °F |
ISO 1133 |
Borealis Borstar® FB2310 LLDPE for Film Borstar BF2310 is a high molecular weight low density polyethylene film grade combining good and flexible extrusion behavior, excellent draw down and superior mechanical properties. Film made from .. |
|||
Melt Flow | 0.20 g/10 min @Load 2.16 kg |
0.20 g/10 min @Load 4.76 lb |
ASTM D 1238 |
Total 3802 YCF MDPE pipe grade FINATHENE® 3802 Y CF is a polyethylene copolymer based on C6 hexene as co-monomer and is produced by a continuous low pressure slurry polymerization process. FINATHENE® 3802 Y CF is a yellow cadmi.. |
|||
Melt Flow | 0.20 g/10 min @Load 10.0 kg, Temperature 220 °C |
0.20 g/10 min @Load 22.0 lb, Temperature 428 °F |
Procedure A; ASTM D1238 |
Diamond Polymers ABS 4011 HH Description: Ultra High Heat ABSInformation provided by Diamond Polymers, Inc. |
|||
Melt Flow | 0.20 g/10 min @Load 5.00 kg, Temperature 200 °C |
0.20 g/10 min @Load 11.0 lb, Temperature 392 °F |
Procedure A; ASTM D1238 |
Diamond Polymers ASA 5946 Description: ASA Weatherable Polymer, Injection Molding Grade, Very High HeatInformation provided by Diamond Polymers, Inc. |
|||
Melt Flow | 0.20 g/10 min @Load 5.00 kg, Temperature 200 °C |
0.20 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
Diamond Polymers ASA S-150E-1115 ASA Weatherable Polymers Extrusion Grade, Medium Impact Information Provided by Diamond Polymers, Inc. & Network Polymers, Inc. |
|||
Melt Flow | 0.20 - 0.50 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.20 - 0.50 g/10 min @Load 4.76 lb, Temperature 374 °F |
UNI EN ISO 1133 |
Breplast Bretene TS COR Plus T10 High Density Polyethylene Recovered polyethylene compositeInformation provided by Breplast S.p.A. |
|||
Melt Flow | 0.20 - 0.50 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.20 - 0.50 g/10 min @Load 4.76 lb, Temperature 374 °F |
UNI EN ISO 1133 |
Breplast Bretene TS COR Plus T15 High Density Polyethylene Recovered polyethylene compositeInformation provided by Breplast S.p.A. |
|||
Melt Flow | 0.20 - 0.50 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.20 - 0.50 g/10 min @Load 4.76 lb, Temperature 374 °F |
UNI EN ISO 1133 |
Breplast Bretene TS COR White F High Density Polyethylene Recovered polyethylene compositeInformation provided by Breplast S.p.A. |
|||
Melt Flow | 0.20 g/10 min @Load 2.16 kg |
0.20 g/10 min @Load 4.76 lb |
ISO 1133 |
Total Lacqtene® 2002 TN 40 HDPE, blow molding, pipe, sheet
(discontinued **) LACQTENE® 2002 TN 40 is a high density polyethylene produced by the gas phase polymerization process with hexene as comonomer.Information provided provided by Total Petrochemicals.Total Petrochemic.. |