Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Melt Index of Compound = 4.0 g/10 min Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Physical Properties Metric English Comments
Melt Index of Compound 4.0 g/10 min

@Load 10.0 kg,
Temperature 220 °C
4.0 g/10 min

@Load 22.0 lb,
Temperature 428 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics Cycolac® EXABS01 ABS
Sheet extrusion ABS with medium impact.
Melt Index of Compound 4.0 g/10 min

@Load 2.16 kg,
Temperature 280 °C
4.0 g/10 min

@Load 4.76 lb,
Temperature 536 °F
ASTM D1238
Ovation Polymers Nima™ NH PA66UT Nylon 66
Polyamide 66 - Ultra Tough, Flame Retarded Non-Hal grade with excellent retention of mechanical properties. *All properties are measured after 48 hours of conditioning at 23°C and 50% relative humi..
Melt Index of Compound 4.0 g/10 min

@Load 2.16 kg,
Temperature 230 °C
4.0 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ISO 1133
Polykemi AB POLYfill PPC T4020 H Polypropylene Copolymer, Mineral Reinforced
Information provided by Polykemi AB
Melt Index of Compound 4.0 g/10 min

@Load 2.16 kg,
Temperature 230 °C
4.0 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ISO 1133
Polykemi AB POLYfill PPH T4020 Polypropylene Homopolymer, Mineral Reinforced
Information provided by Polykemi AB
Melt Index of Compound 4.0 g/10 min

@Load 2.16 kg,
Temperature 230 °C
4.0 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ISO 1133
Polykemi AB POLYfill PPH TS4020D Polypropylene Homopolymer, Mineral Reinforced, Detergent Resistant
Information provided by Polykemi AB
Melt Index of Compound 4.0 g/10 min

@Load 1.20 kg,
Temperature 300 °C
4.0 g/10 min

@Load 2.65 lb,
Temperature 572 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics Lexan® 3414R PC (Europe-Africa-Middle East)
LEXAN 3414R is a high viscosity, 40% glass reinforced, flame retardant grade, especially designed for applications requiring high rigidity together with high heat resistance.
Melt Index of Compound 4.0 g/10 min

@Load 2.16 kg,
Temperature 300 °C
4.0 g/10 min

@Load 4.76 lb,
Temperature 572 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics Lexan® HP8REU PC (Europe-Africa-Middle East)
Very low flow polycarbonate. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO10993 or USP Class VI). EtO and steam sterilizable. Contains mold..
Melt Index of Compound 4.0 g/10 min

@Load 10.0 kg,
Temperature 220 °C
4.0 g/10 min

@Load 22.0 lb,
Temperature 428 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics Cycolac® EX58 ABS
High impact ABS for sheet extrusion and blow molding applications.
Melt Index of Compound 4.0 g/10 min

@Load 2.16 kg,
Temperature 230 °C
4.0 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ISO 1133
Polykemi AB POLYfill PPH T4030 Polypropylene Homopolymer, Mineral Reinforced
Information provided by Polykemi AB
Melt Index of Compound 4.0 g/10 min

@Load 2.16 kg,
Temperature 230 °C
4.0 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ISO 1133
Polykemi AB POLYfill PPH T4060 Polypropylene Homopolymer, Mineral Reinforced
Information provided by Polykemi AB
Melt Index of Compound 4.0 - 5.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
4.0 - 5.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
Petroquimica Triunfo Trithene® TS 7045 LDPE - Film - Plastification
The Trithene TS 7045 resin is a low-density polyethylene (LDPE) with an excellent processability, which allows for a low energy consumption during extrusion and warrants the production of thin films..
Melt Index of Compound 4.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
4.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
ICO Polymers ICORENEâ„¢ 150-1119 HDPE Rotational Molding Resin
Description: ICORENE 150-1119 polyethylene developed for use in rotational molding. It has very high stiffness, toughness, and scratch resistance combined with good processability. This product is..
Melt Index of Compound 4.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
4.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
ICO Polymers ICORENEâ„¢ 150-1499 HDPE Rotational Molding Resin
Description: ICORENE 150-1499 polyethylene developed for use in rotational molding. It has very high stiffness, toughness, and scratch resistance combined with good processability. This product is ..
Melt Index of Compound 4.0 g/10 min

@Temperature 190 °C
4.0 g/10 min

@Temperature 374 °F
ASTM D1238
Mitsui ADMER® NF548A PE Type Polyolefin
ADMER® Adhesive Resin is a modified polyolefin with functional groups, designed to bond to a variety of polyolefins, ionomers, polyamides, ethylene vinyl alcohol (EVOH), polyesters (PET), polycar..
Melt Index of Compound 4.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
4.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
Kuraray SEPTON® H5125
Description: HYBRAR® is another in the series of new high performance thermoplastic rubbers developed by KURARAY using their unique isoprene technology. HYBRAR® is a special thermoplastic rubb..
Melt Index of Compound 4.0 g/10 min

@Load 5.00 kg,
Temperature 265 °C
4.0 g/10 min

@Load 11.0 lb,
Temperature 509 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics Xenoy® X4850 PBT+PC
Xenoy X4850 is a hydrostable, high modulus, high ductile PC/PBT blend. Furthermore, this resin provides high chemicalresistance, very low creep, low CTE, excellent fatique and high heat dimensional ..
Melt Index of Compound 4.0 g/10 min

@Load 5.00 kg,
Temperature 265 °C
4.0 g/10 min

@Load 11.0 lb,
Temperature 509 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics Xenoy® X4850 PBT+PC (Europe-Africa-Middle East)
Xenoy X4850 is a hydrostable, high modulus, high ductile PC/PBT blend. Furthermore, this resin provides high chemicalresistance, very low creep, low CTE, excellent fatique and high heat dimensional ..
Melt Index of Compound 4.0 g/10 min

@Load 10.0 kg,
Temperature 280 °C
4.0 g/10 min

@Load 22.0 lb,
Temperature 536 °F
MVR [cm^3/10 min]; ISO 1133
SABIC Innovative Plastics NORYL GTX GTX8120P PPE+PA (Europe-Africa-Middle East)
GTX8120P is a glass filled extrudable Noryl GTX with low thermal conductivity, suitable for thermal breaks
Melt Index of Compound 4.0 g/10 min

@Load 2.16 kg,
Temperature 230 °C
4.0 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
A. Schulman PP 1247-01 Polypropylene Homopolymer Polypropylene
DescriptionPolypropylene PP 1247-01 is a homopolymer polypropylene designed for general-purpose injection-molding applications where parts require excellent stiffness. ApplicationPolypropylene PP 12..
Melt Index of Compound 4.0 g/10 min
4.0 g/10 min
ASTM D1238
DuPont Surlyn® 8945 Thermoplastic Ionomer Resin
Surlyn® 8945 provides high flow properties and consistent, easy processing in molded and extruded applications. It is positioned in the medium/high acid, high neutralization area of the ionomer sp..
Melt Index of Compound 4.0 - 12 g/10 min

@Load 2.16 kg,
Temperature 230 °C
4.0 - 12 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
A. Schulman POLYFLAM™ E-13030B Reinforced Super Coupled Polypropylene Black
DescriptionPolyfort® E-13030B is a reinforced super coupled polypropylene black. Information provided by A. Schulman.
Melt Index of Compound 4.0 g/10 min

@Load 2.16 kg,
Temperature 230 °C
4.0 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
A. Schulman PP 1247-01 Polypropylene Homopolymer Polypropylene
DescriptionPolypropylene PP 1247-01 is a homopolymer polypropylene designed for general-purpose injection-molding applications where parts require excellent stiffness. ApplicationPolypropylene PP 12..
Melt Index of Compound 4.0 - 12 g/10 min

@Load 2.16 kg,
Temperature 230 °C
4.0 - 12 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
A. Schulman POLYFLAM™ E-13030B Reinforced Super Coupled Polypropylene Black
DescriptionPolyfort® E-13030B is a reinforced super coupled polypropylene black. Information provided by A. Schulman.
Melt Index of Compound 4.0 g/10 min

@Load 2.16 kg,
Temperature 230 °C
4.0 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
A. Schulman PP 1247-01 Polypropylene Homopolymer Polypropylene
DescriptionPolypropylene PP 1247-01 is a homopolymer polypropylene designed for general-purpose injection-molding applications where parts require excellent stiffness. ApplicationPolypropylene PP 12..
Melt Index of Compound 4.0 - 12 g/10 min

@Load 2.16 kg,
Temperature 230 °C
4.0 - 12 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
A. Schulman POLYFLAM™ E-13030B Reinforced Super Coupled Polypropylene Black
DescriptionPolyfort® E-13030B is a reinforced super coupled polypropylene black. Information provided by A. Schulman.
Melt Index of Compound 4.0 g/10 min

@Load 2.16 kg,
Temperature 230 °C
4.0 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ASTM D1238
A. Schulman PP 829-01 Polypropylene Homopolymer Polypropylene
DescriptionPolypropylene PP 829-01 is a homopolymer polypropylene approved to Ford specification ESB-M4D63A. Primarily used for interior automotive components, this material is also well suited for..
Melt Index of Compound 4.0 - 8.0 g/10 min
4.0 - 8.0 g/10 min
ASTM D1238
A. Schulman POLYFORT™ FPP 4020 20% Mineral-Filled Polypropylene
DescriptionPolyfort® FPP 4020 is a 20% mineral-filled polypropylene designed for use when improved heat resistance and high stiffness is needed.Information provided by A. Schulman.
Melt Index of Compound 4.0 g/10 min

@Load 2.16 kg,
Temperature 190 °C
4.0 g/10 min

@Load 4.76 lb,
Temperature 374 °F
ASTM D1238
Arkema Group OREVAC® 18380 Maleic Anhydride Modified Polyethylene
OREVAC® 18380 is anhydride modified polyethylene. It is available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. OREVAC® 1..
Melt Index of Compound 4.0 - 6.0 g/10 min
4.0 - 6.0 g/10 min
ASTM D1238
Cheng Yu Plastic A700UV ABS-UV Resistance
Melt Index of Compound 4.0 g/10 min

@Load 2.16 kg,
Temperature 230 °C
4.0 g/10 min

@Load 4.76 lb,
Temperature 446 °F
ISO 1133
Polykemi AB POLYfill PPH TS4020 Polypropylene Homopolymer, Mineral Reinforced
Information provided by Polykemi AB
Copyright © lookpolymers.com All Rights Reserved