Physical Properties | Metric | English | Comments |
---|---|---|---|
Particle Size | >= 0.50 µm | >= 0.50 µm | Primary Crystal Size |
Nabaltec NABALOX® NO 313 Ground Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Particle Size | >= 0.50 µm | >= 0.50 µm | Primary Crystal Size |
Nabaltec NABALOX® NO 713-40 Reactive Alumina NABALOX® aluminum oxide has a number of advantages including low sintering temperaturewide sintering rangeflexible processinghigh sintered densities high wear and impact resistanceelectrical insula.. |
|||
Particle Size | 0.50 µm | 0.50 µm | 48% of particles less than |
Old Hickory 56-SR Kentucky Ball Clay This is a kaolinitic clay with excellent extrusion and die pressing characteristics. It has some colloidal carbon content but only a moderate amount of shrinkage. This clay is suitable for a variety.. |
|||
Particle Size | 0.50 µm | 0.50 µm | 40% of particles less than |
Old Hickory FC-340 Tennessee Ball Clay The FC-340 clay is designed for all types of casting formulas ranging from low fire earthenware to vitreous composition. It has excellent response to deflocculation and a very good casting rate whil.. |
|||
Particle Size | 0.50 µm | 0.50 µm | 24.4% of particles less than |
Old Hickory M&M Clays, Inc. Wilco-SLU Kaolin Clay Wilco SLU is an aqueous suspension of kaolin produced at 70% solids content. The slurry is deflocculated and rheology stabilized with sodium silicate. The Wilco SLU grade is a highly permeable selec.. |
|||
Particle Size | 0.50 µm | 0.50 µm | 44% of particles less than |
Old Hickory M-33 Kentucky Ball Clay The M-33 ball clay is a carbonaceous selection that bears similarity to some clays found in the Southwestern section of England. It has a uniquely waxy type of plasticity and provides high green and.. |
|||
Particle Size | 0.50 µm | 0.50 µm | 44% of particles less than |
Old Hickory M-44 Kentucky Ball Clay A highly plastic clay blend containing kaolin and other mixed layer minerals. It is white firing with excellent vitrification properties for use in whiteware ceramic casting, pressing, or plastic fo.. |
|||
Particle Size | 0.50 µm | 0.50 µm | 56% of particles less than |
Old Hickory MCB-11 Tennessee Ball Clay A clay with excellent kaolin content and virtually no carbon content. It is highly plastic with excellent fired brightness and is an excellent clay for a variety of ceramic glaze and porcelain compo.. |
|||
Particle Size | 0.50 µm | 0.50 µm | 52% of particles less than |
Old Hickory No. 1 Glaze Kentucky Ball Clay No. 1 Glaze Clay is a very high kaolin bearing selection with extremely low levels of carbon content. it provides excellent suspension to all types of glazes especially glazes containing a high perc.. |
|||
Particle Size | 0.50 µm | 0.50 µm | 50% of particles less than |
Old Hickory No. 6 Kentucky Ball Clay No. 6DC is a highly kaolin clay that can be used as a filler grade material where presence of some 200 M quartz residue is not harmful. Applications can include a variety of refractory compositions .. |
|||
Particle Size | 0.50 µm | 0.50 µm | 56% of particles less than |
Old Hickory Taylor Blend Tennessee Ball Clay A highly plastic clay suitable for a variety of extruded, pressed, or casting ceramic formulations. It is a fine PSD clay with low carbon content and excellent fired brightness.Information provided .. |
|||
Particle Size | 0.50 µm | 0.50 µm | 52% of particles less than |
Old Hickory Volunteer Tennessee Ball Clay A versatile clay selection for casting, pressing, or plastic forming process methods. It is similar to M-23 in mineralogy with slightly more organic content. Volunteer has very good plasticity and i.. |
|||
Particle Size | 0.50 - 1.0 µm | 0.50 - 1.0 µm | D<sub>50</sub> |
NYC YT3W Y2O3 Powder |
|||
Particle Size | 0.50 µm | 0.50 µm | Raw Material; Average; D<sub>50</sub>; Microtrac HRA |
NYC YT3WBQ Y2O3 CIP (Cold Isostatic Pressing) Granules 99.9% and better high purity granules produce high quality finished ceramics. Uses include semiconductors / LCD industries, metallurgy, magnets, and electroceramics.Acrylic binder systemExcellent g.. |
|||
Particle Size | 0.50 µm | 0.50 µm | 31% of particles less than |
Old Hickory UltraCast Slurry PC-2034 Kentucky Ball Clay These popular slurry grades are shipped at 60% solids content and deflocculated with sodium silicate to maintain stable rheology characteristics. All the above grades are suitable for a variety of c.. |
|||
Particle Size | 0.50 - 1.0 µm | 0.50 - 1.0 µm | D<sub>50</sub> |
NYC YT3WP Y2O3 Granules |
|||
Particle Size | 0.50 µm | 0.50 µm | 71.5% finer than |
Imerys Aftonâ„¢ Kaolin Afton is a fine-grained air floating kaolin which is widely used as an anit-caking agent in certain agricultural compounds.Information provided by Imerys |
|||
Particle Size | 0.50 µm | 0.50 µm | 28% finer than |
Imerys Allenâ„¢ Kaolin Allen is an intermediate-grained kaolin suitable for use as a filler and pigment in a wide variety of industrial applications such as soft rubber, plastics, ceiling tile, adhesives and paper product.. |
|||
Particle Size | 0.50 µm | 0.50 µm | 72% finer than |
Imerys Amlockâ„¢ 321 Kaolin Information provided by Imerys |
|||
Particle Size | 0.50 µm | 0.50 µm | 27% finer than |
Imerys DB-Floatâ„¢ Kaolin Information provided by Imerys |
|||
Particle Size | 0.50 µm | 0.50 µm | 25% finer than |
Imerys Kingsleyâ„¢ Kaolin Kingsley is a coarse-grained, white firing kaolin used in the dinnerware, tile, artware and electrical porcelain industries.Information provided by Imerys |
|||
Particle Size | 0.50 µm | 0.50 µm | 20% finer than |
Imerys KT Cast Slurryâ„¢ Kaolin KT Cast Slurry is a carefully controlled kaolin-water suspension formulated for use in ceramic operations.Information provided by Imerys |
|||
Particle Size | 0.50 µm | 0.50 µm | 30% finer than |
Imerys KT-Cast/Rogersâ„¢ Kaolin Information provided by Imerys |
|||
Particle Size | 0.50 µm | 0.50 µm | 72% finer than |
Imerys Mercapâ„¢ 100 Kaolin Information provided by Imerys |
|||
Particle Size | 0.50 µm | 0.50 µm | 10% |
Minelco UltraCarb LH3 Hydrated Magnesium Calcium Carbonate Mineral Flame RetardantUltracarb combines properties normally associated with several different materials that can be used jointly or individually to benefit many applications including rubber, plas.. |
|||
Particle Size | 0.50 µm | 0.50 µm | Average Particle Size/Laser Diffraction D50 |
H.C. Starck Grade BF 17 Silicon Carbide, SiC Beta SiC for sintering.Sliding bearingsSeal ringsWear partsKiln furniture, crucibles, heating elements, burner nozzles, heat exchangersSemiconductor handling partsComponents for wafer processing (su.. |
|||
Particle Size | 0.50 µm | 0.50 µm | Average Particle Size/Laser Diffraction D50 |
H.C. Starck Grade HD 20 Boron Carbide, B4C Powder for sintering.Abrasive grit or powder (grinding, lapping, polishing)Wear resistant engineering components (e.g. sand-blasting and water jet nozzlesLight weight ceramic armorMetal infiltration.. |
|||
Particle Size | 0.50 µm | 0.50 µm | |
Shin-Etsu Silicones X-52-2328 Fluid Information Provided by Shin-Etsu Silicones of America, Inc. |
|||
Particle Size | 0.50 - 25 µm | 0.50 - 25 µm | PSD (d<sub>50</sub> |
Terio Corporation TZC-15~80 CeO2-ZrO2 Information provided by TERIO Corporation. |
|||
Particle Size | <= 0.50 µm | <= 0.50 µm | Crystal size |
3M Nextel™ 720 Composite Ceramic Fiber Chemical composition above is wt%. Filament diameter is 10-12 µm.3M Nextel Ceramic Fibers 610, 650, and 720 are composite grade fibers. They have a refined crystal structure based on alpha-Al2O3 .. |