Polymer Property : Density = 0.0415 lb/in³ Product List

Physical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Physical Properties	Metric	English	Comments
Density	1.15 g/cc	0.0415 lb/in³	ASTM D792
Multibase Multi-Pro® 3018 XUG Polypropylene Mineral Filled, 30% by weight.Features:Gloss, HighForms:PelletsProcessing Methods:Injection MoldingUses:AppliancesFurnitureInformation provided by Multibase
Density	1.15 g/cc	0.0415 lb/in³	ISO 1183
Polykemi AB POLYelast TPE Z406 Thermoplastic Elastomer, SEBS-based Information provided by Polykemi AB
Density	1.15 g/cc	0.0415 lb/in³	ISO 1183
Nilit FRIANYL A63 M2 Nylon 6.6 for injection molding, 2% molybdenum disulphide lubricated Nylon 6.6 for injection molding.Information provided by Frisetta Polymer, which merged into Nilit Plastics
Density	1.15 g/cc	0.0415 lb/in³	ISO 1183
SABIC Innovative Plastics Cycoloy® CX5430 PC+ABS (Europe-Africa-Middle East) Cycoloy* resin CX5430 is a general purpose PC/ABS blend developed for thin wall applications requiring weld line strength, high flow and impact together with a good balance of other properties.This ..
Density	1.15 - 1.61 g/cc	0.0415 - 0.0582 lb/in³	Average value: 1.42 g/cc Grade Count:27
Overview of materials for ABS/Polyester Alloy + GF This property data is a summary of similar materials in the MatWeb database for the category "ABS/Polyester Alloy + GF". Each property range of values reported is minimum and maximum values of appro..
Density	1.15 g/cc	0.0415 lb/in³
Arkema Group Oroglas® HFI-10 Acrylic, Impact Grade (discontinued **) OROGLAS HFI-10 is an impact grade that in addition to its superior impact resistance provides an improvement in flow which contribute to improve molding behavior and reduce cycle time.Key features :..
Density	1.15 g/cc	0.0415 lb/in³
DuPont™ Dartek® B-601 Nylon 6,6 Barrier Film, 25 µm Thickness (discontinued **) Data provided by DuPont Packaging Polymers.A strong transparent nylon type 6,6 film which has a PVDC coating applied to one side for enhanced barrier to oxygen, moisture, grease and odor. Can be pri..
Density	1.15 g/cc	0.0415 lb/inÂ³	ASTM D792
Huntsman IROGRANÂ® CA116-201 TPU-Polyester Introduction: IROGRAN CA116-201 is a high performance polyester based thermoplastic polyurethane intended for flat die extrusion applications. IROGRAN CA116-201 is part of the HUNTSMAN film and shee..
Density	1.15 g/cc	0.0415 lb/inÂ³	ASTM D792
Global PC/ABS-1211 General Purpose Polycarbonate/ABS Alloy Information provided by Global Polymers Corporation.
Density	1.15 g/cc	0.0415 lb/inÂ³	ASTM D792
Multibase Multi-FlexÂ® TPE A 5801 LC BLK Multi-FlexÂ® LC compounds are a new generation elastomers exhibiting improved compression set at elevated temperature. Multi-FlexÂ® TPE compounds are based on Shell's Kraton G technology and fe..
Density	1.15 g/cc	0.0415 lb/inÂ³	ISO R 1183
Schwartz Technical Plastics LAMIGAMIDÂ® 319 Cast Polyamide 6, Oil Filled, Conditioned Application: sheaves and wheels without additional bearings, sliding linersInformation provided by Schwartz Technical Plastics GmbH
Density	1.15 g/cc	0.0415 lb/inÂ³	ISO 1183
SABIC Innovative Plastics LNP LUBRICOMP ZL003 PPE+PS (Asia Pacific) LNP LUBRICOMP ZL003 is a compound based on PPE+PS Blend resin containing PTFE. Added features of this material include:internally Lubricated. Also known as LUBRICOMP ZL-4030
Density	1.15 g/cc	0.0415 lb/inÂ³
Solvay SIPOMERÂ® WAM Allyl / Ureido Monomer Description: Specialty monomer for Wet Adhesion PromotionIdentification: ALLYL / UREIDO MONOMERCAS: 90412 â€“ 00 â€“ 3EINECS: 291 â€“ 480 â€“ 2Solubility: Soluble in water. Insoluble in ..
Density	1.15 g/cc	0.0415 lb/in³	ASTM D792
Chase Plastics CP Pryme® NN100M2HS (Dry) Nylon 66, Lubricated, Heat Stabilized Features: Good chemical resistanceFast cycleDurableHeat stabilizedLubricatedSolvent resistantInjection moldingForm: PelletsInformation provided by Chase Plastics.
Density	1.15 g/cc	0.0415 lb/in³	ASTM D792
Wanhua Chemical Wanthane® WHT-8280H Super Hard Polyether-Based TPU Low mold shrinkage, good impact resistance, perfect transparency, good mold release, fatigue resistance, chemical & hydrolytic resistanceInformation provided by Wanhua Chemical Group Co., Ltd.
Density	1.15 g/cc	0.0415 lb/in³	Compound; ASTM D792
Borealis Casico™ FR4802 Non-Halogen Flame Retardant Insulation/Jacketing Compound Borstar FR4802 is a natural, thermoplastic polyolefin compound designed for flame retardant low voltage wire insulation and jacketing. As such, FR4802 offers a unique combination of good extrusion p..
Density	1.15 g/cc	0.0415 lb/in³
Covestro Apec® HT KU 1-9354/1 High-Heat Polycarbonate Transparent and opaque shades possible.Applications: Lighting, electrical parts.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially..
Density	1.15 g/cc	0.0415 lb/in³
Covestro Bayblend® T 84 Polycarbonate/ABS Blend Easier flowing than BAYBLEND T 85 MN.Information provided by Bayer.As of 1 September 2015, Bayer MaterialScience was separated from Bayer AG and officially adopted its new name – Covestro.
Density	1.15 g/cc	0.0415 lb/in³	ISO 1183
Covestro Bayblend® T85 Polycarbonate + ABS General purpose injection molding gradeVicat/B 120 temperature = 131°Chigh impact and notched impact strengthPreprocessingMax. Water content
Density	1.15 g/cc	0.0415 lb/in³
Covestro Desmopan® 588 Thermoplastic Polyurethane Desmopan 588 is a TPU on the basis of a special ether with good microbe-resistance.Applications: Cable sheathing, hoses, profiles.Information provided by Bayer.As of 1 September 2015, Bayer Material..
Density	1.15 g/cc	0.0415 lb/in³	ISO 1183
DSM Arnitel® EB463 Polyether Ester Elastomer (European and Asian Grade) Product description: Arnitel® combines the advantages of engineering thermoplastics, being easy to process with excellent mechanical properties, at the same time with the flexibility of rubbers.Arn..
Density	1.15 g/cc	0.0415 lb/in³	ISO 1183
CP-Polymer-Technik Wellamid® 6600 PA-66-HWV0CP UL-Licensed Nylon 66, Flame Protection, Heat Stabilized, Dry Information provided by CP-Polymer-Technik GmbH & Co. KG
Density	1.15 g/cc	0.0415 lb/in³	ISO 1183
DuPont Performance Polymers Hytrel® HTR8685 BK022A Polyester Elastomer TPC-ET (Unverified Data**) 44 Shore D Lubricated High Viscosity Polyester Elastomer with Superior Fatigue Resistance Developed for Blow Molding Hytrel HTR8685 BK022A is designed for blow molding or processing techniques requi..
Density	1.15 g/cc	0.0415 lb/in³
Trelleborg Emerson & Cuming Stycast® 2741-15 Two-Component Epoxy Flexible Encapsulant Emerson & Cuming 2741-15 Stycast® Two-Component Epoxy Flexible EncapsulantDescriptionElectronic embedment and sealing of metals, ceramics, and plastics. Protection of stress sensitive components wh..
Density	1.15 - 1.45 g/cc	0.0415 - 0.0524 lb/in³	Average value: 1.27 g/cc Grade Count:18
Overview of materials for Polystyrene + Polyphenylene Ether, Glass Filler This property data is a summary of similar materials in the MatWeb database for the category "Polystyrene + Polyphenylene Ether, Glass Filler". Each property range of values reported is minimum and ..