- HOME
- POLYMER SEARCH
- Thermoset
- Rubber or Thermoset Elastomer (TSE)
- Dow Corning HS II BASE & 10:1 CLAY CATALYST
Dow Corning HS II BASE & 10:1 CLAY CATALYST
| Category | Polymer , Thermoset , Rubber or Thermoset Elastomer (TSE) , Silicone , Silicone Rubber |
| Manufacturer | Dow Corning |
| Trade Name | |
| Port | Ningbo port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Dow Corning HS II BASE & 10:1 CLAY CATALYST.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
High strength silicone mold making rubber, suited for the art foundry industry that typically uses sulfur-based clays. HS II Base with HS II 10:1 Clay Catalyst is recommended for use with polyesters, plaster, wax and cement and can be used with polyurethane.Information provided by Dow Corning
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Specific Gravity | 1.21 g/cc @Temperature 25.0 °C |
1.21 g/cc @Temperature 77.0 °F |
|
| Viscosity | 20000 cP | 20000 cP | dynamic |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Shore A | 22 | 22 | |
| Tensile Strength, Ultimate | 3.10 MPa | 450 psi | |
| Elongation at Break | 325 % | 325 % | |
| Tear Strength | 21.0 kN/m | 120 pli |
| Descriptive Properties | Value | Comments |
|---|---|---|
| Mix Ratio (X:1) | 10 | Base to Catalyst ETN |
| Working Time (min) | 45 |
Users viewing this material also viewed the following:
Copyright © lookpolymers.com All Rights Reserved