Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Zone 2 = 190 °C Product List

Processing Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Processing Properties Metric English Comments
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Celcon® M25UV POM, UV Resistant  (Unverified Data**)
Celcon® M25UV is an acetal copolymer developed as a natural UV light stabilized low flow, high molecular weight grade. It has been formulated as a natural acetal that does not discolor, yet maintai..
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Celcon® M270UV POM, UV Resistant  (Unverified Data**)
Celcon® M270UV is an acetal copolymer developed as a natural UV light stabilized lower molecular weight, high-flow grade designed for superior moldability in multi-cavity or hard to fill injection ..
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Hostaform® C 2521 LS POM, UV Resistant  (Unverified Data**)
Stiff-flowing grade for injection molding and extrusion, UV resistantInformation provided by Celanese
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Hostaform® C 2521 XAP² ™ POM  (Unverified Data**)
POM copolymerlow EmissionInformation provided by Celanese
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Hostaform® C 27021 POM  (Unverified Data**)
Chemical abbreviation according to ISO 1043-1: POMInjection molding grade with high flowInformation provided by Celanese
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Hostaform® C 36021 POM  (Unverified Data**)
Hostaform® C 36021 is an unfilled acetal copolymer grade formulated for high flow while retaining a good balance of mechanical properties.High flow, unfilled, for fast cycle & thin wallsInformation..
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Hostaform® LM25 POM, Specialty  (Unverified Data**)
Hostaform® LM25 is a 2.5 melt flow acetal copolymer which is capable of being permanently marked by a laser. Parts molded from Hostaform® LM25 can be lasermarked with bar-codes, identification num..
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Hostaform® MR130ACS POM, Specialty  (Unverified Data**)
Hostaform® acetal copolymer grade MR130ACS is a general purpose acetal with improved acid stabilization. Hostaform® MR130ACS demonstrates improved performance over standard acetals after intermit..
Zone 2 170 - 190 °C
338 - 374 °F
Extrusion Molding
LG Chemical KEYFLEX BT 3140D Ester Type TPE
Description: Injection Molding, TPC-ET, Specialty, Low Melting Temperature, Low ModulusApplication: Masterbatch Carrier, Cable Compound BaseCAS: 37282-12-5Information provided by LG Chemical
Zone 2 180 - 190 °C
356 - 374 °F
Injection Molding
Kolon ELLAS K-260D Thermoplastic Polyurethane
ApplicationsExtrusion: Antenna, Heel TipInjection: Hose, Tube, SheetIndustry Parts Information provided by API-Kolon.
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Celcon® GB25 POM, 25% Glass Reinforced
Celcon« GB25 acetal copolymer is a 25% glass bead filled grade for low shrinkage and warp resistance in large, flat and thin walled parts.Information provided by Celanese
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Celcon® GC25TF POM, 25% Glass Reinforced
Celcon« GC25TF is a 25% glass coupled acetal copolymer formulated for higher flow in thin walled and small parts. Celcon GC25TF is also exceptionally resistant to fuel. It offers excellent resista..
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Celcon® M90-45H POM, UV Resistant
Celcon« M90-45H is an acetal copolymer which has been stabilized to give protection against property and color degradation in interior applications where UV exposure is anticipated.Information prov..
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Hostaform® C 2521 POM, Unfilled
Chemical abbreviation according to ISO 1043-1: POMInformation provided by Celanese
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Hostaform® MT12U03 POM, Medical Technology
Hostaform« MT12U03 is a special grade developed for medical industry applications containing low residual monomers and no animal products. Hostaform« MT12U03 is a moderately high flow grade for fa..
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Hostaform® S 27063 XAP2® POM
Description: Easy flowing elastomer-containing injection molding type based on HOSTAFORM C 27021; with higher impact strength and reduced emissions. Burning rate ISO 3795 and FMVSS 302 < 100 mm/min ..
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Celcon® LW90 POM, Tribological
Celcon« LW90 is a nominal 9 melt flow rate based material specifically formulated for high speed, low wear applications against metals. LW90 conforms to applicable FDA regulations governing food co..
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Celcon® M140 POM, Unfilled
Celcon« acetal copolymer grade M140 is a moderately high flow general purpose injection molding grade. It is designed for use in applications requiring some enhanced flow characteristics over the s..
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Celcon® M90™ POM, Unfilled
Celcon acetal copolymer grade M90Ö is a medium viscosity polymer providing optimum performance in general purpose injection molding and extrusion of thin walled tubing and thin gauge film. This gr..
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Celcon® UV25Z POM, UV Resistant
Celcon« UV25Z is a nominal 2.5 melt flow rate acetal copolymer which has been specially stabilized to prevent discoloration and deterioration of mechanical properties from ultraviolet light exposur..
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Hostaform® C 13021 POM, Unfilled
Chemical abbreviation according to ISO 1043-1: POMInformation provided by Celanese
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Celcon® M450 POM  (Unverified Data**)
Celcon® acetal copolymer grade M450 is an extremely low viscosity grade for optimal cycle performance in very thin walls or long, narrow flow paths in injection molding.Very high flow, fast cycling..
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Hostaform® S 27072 WS 10/1570 POM, Impact Modified  (Unverified Data**)
Chemical abbreviation according to ISO 1043-1: POM-HIEasy flowing, elastomer-containing injection molding grade; black; weathering resistantInformation provided by Celanese
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Hostaform® S 9243 XAP² ™ POM, Impact Modified  (Unverified Data**)
POM copolymer, modifiedImpact modified, low emissionInformation provided by Celanese
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Hostaform® S 9362 XAP² ™ POM, Impact Modified  (Unverified Data**)
Preliminary Data SheetImpact modified, improved modulus and weld line, low emissionInformation provided by Celanese
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Celcon® LW90-F2 POM, Tribological
Celcon« LW90-F2 is an acetal copolymer formulated with a nominal 9 melt flow rate base polymer and a standard level of polytetrafluoroethylene filler (PTFE). It is designed for use in wear applicat..
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Hostaform® C 9021 GV1/30 GT POM, 26% Tribological
Chemical abbreviation according to ISO 1043-1: POMInformation provided by Celanese
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Hostaform® C 9021 GV3/20 POM, 20% Glass Reinforced
Chemical abbreviation according to ISO 1043-1: POMInformation provided by Celanese
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Hostaform® C 9021 XAP® POM, Unfilled
POM copolymerInformation provided by Celanese
Zone 2 180 - 190 °C
356 - 374 °F
Celanese Celcon® M90AW POM, Tribological
Celcon« M90AW is a low wear grade designed for gears and other low wear applications, especially where reducing noise and wear in low load-high velocity applications. Celcon« M90AW is an option ..
Copyright © lookpolymers.com All Rights Reserved