Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 16.2 µm/m-°C @Temperature 20.0 °C |
9.00 µin/in-°F @Temperature 68.0 °F |
|
Performance Alloys MoldStar® 18 (PAS 18) Bronze Mold Alloy Description: MoldStar® 18 bronze alloy provides good bearing qualities and resistance to wear, abrasion, fatigue, deformation and corrosion.Applications: SlidesGibsWear PlatesMold Locking DevicesSl.. |
|||
CTE, linear | 16.2 µm/m-°C @Temperature 20.0 °C |
9.00 µin/in-°F @Temperature 68.0 °F |
|
Performance Alloys MoldStar® 21 (PAS 21) Bronze Mold Alloy Description: MoldStar® 21 bronze alloy provides good bearing qualities and resistance to wear, abrasion, fatigue, deformation and corrosion.Applications: Lifter BladesSlidesGibsWear PlatesEjector S.. |
|||
CTE, linear | 16.2 µm/m-°C @Temperature -40.0 - 149 °C |
9.00 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
Quadrant EPP Duratron® PAI T5030 Polyamide-imide, glass reinforced, extruded (ASTM Product Data Sheet) |
|||
CTE, linear | 16.2 - 46.8 µm/m-°C | 9.00 - 26.0 µin/in-°F | Average value: 34.0 µm/m-°C Grade Count:4 |
Overview of materials for Polyamide-Imide, Glass Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyamide-Imide, Glass Filled". Each property range of values reported is minimum and maximum values of .. |
|||
CTE, linear | 16.2 µm/m-°C @Temperature 20.0 - 95.0 °C |
9.00 µin/in-°F @Temperature 68.0 - 203 °F |
|
HP Alloys Nitronic® 50 Austenitic Stainless, Level 4 Cold Worked Cold Worked applies to tensile values and are for 1/4 to 2 in. diameter samples; other properties are typical of this alloy.Nitronic® 50 Stainless Steel provides a combination of corrosion resist.. |
|||
CTE, linear | 16.2 µm/m-°C @Temperature 25.0 - 500 °C |
9.00 µin/in-°F @Temperature 77.0 - 932 °F |
|
Wieland Porta Maximum NF PFM Alloy All-purpose alloy for low-fusing high expanding ceramicsApplications: inlays/onlays, crowns, short span bridges, long span bridges, telescopic and milling works, removable partials, ceramic veneerin.. |
|||
CTE, linear | 16.2 µm/m-°C @Temperature 20.0 - 300 °C |
9.00 µin/in-°F @Temperature 68.0 - 572 °F |
|
Eagle Brass 715 Copper Nickel 30%, 1/2 Hard 715 exhibits excellent corrosion resistance, especially in marine applications. It has moderately high strength and has good creep resistance at elevated temperatures. The cost is relatively high co.. |
|||
CTE, linear | 16.2 µm/m-°C @Temperature 20.0 - 300 °C |
9.00 µin/in-°F @Temperature 68.0 - 572 °F |
|
Eagle Brass 715 Copper Nickel 30%, Extra Hard 715 exhibits excellent corrosion resistance, especially in marine applications. It has moderately high strength and has good creep resistance at elevated temperatures. The cost is relatively high co.. |
|||
CTE, linear | 16.2 µm/m-°C @Temperature 20.0 - 300 °C |
9.00 µin/in-°F @Temperature 68.0 - 572 °F |
|
Eagle Brass 715 Copper Nickel 30%, Hard 715 exhibits excellent corrosion resistance, especially in marine applications. It has moderately high strength and has good creep resistance at elevated temperatures. The cost is relatively high co.. |
|||
CTE, linear | 16.2 µm/m-°C @Temperature 20.0 - 300 °C |
9.00 µin/in-°F @Temperature 68.0 - 572 °F |
|
Eagle Brass 735 Nickel Silver 18%, Annealed 735 is used for coinage, name plates, zippers, flatware, and fashion jewelry.Information provided by Eagle Brass Company |
|||
CTE, linear | 16.2 µm/m-°C @Temperature 20.0 - 300 °C |
9.00 µin/in-°F @Temperature 68.0 - 572 °F |
|
Eagle Brass 735 Nickel Silver 18%, Extra Spring 735 is used for coinage, name plates, zippers, flatware, and fashion jewelry.Information provided by Eagle Brass Company |
|||
CTE, linear | 16.2 µm/m-°C @Temperature 20.0 - 300 °C |
9.00 µin/in-°F @Temperature 68.0 - 572 °F |
|
Eagle Brass 752 Nickel Silver 18%, 3/4 Hard Alloy C752 combines corrosion resistance with strength and a lustrous silver color. Applications include optical frames and parts, springs, surgical instruments, jewelry, resistors and contacts.Info.. |
|||
CTE, linear | 16.2 µm/m-°C @Temperature 20.0 - 300 °C |
9.00 µin/in-°F @Temperature 68.0 - 572 °F |
|
Eagle Brass 752 Nickel Silver 18%, Hard Alloy C752 combines corrosion resistance with strength and a lustrous silver color. Applications include optical frames and parts, springs, surgical instruments, jewelry, resistors and contacts.Info.. |
|||
CTE, linear | 16.2 µm/m-°C @Temperature 20.0 - 300 °C |
9.00 µin/in-°F @Temperature 68.0 - 572 °F |
|
Eagle Brass 762 Nickel Silver 12%, 1/2 Hard 762 is a nickel silver alloy that has excellent strength, stress relaxation resistance, and solderability. Due to it being extremely resistant to corrosion it doesn't tarnish easily and has a long s.. |
|||
CTE, linear | 16.2 µm/m-°C @Temperature 20.0 - 300 °C |
9.00 µin/in-°F @Temperature 68.0 - 572 °F |
|
Eagle Brass 762 Nickel Silver 12%, 1/4 Hard 762 is a nickel silver alloy that has excellent strength, stress relaxation resistance, and solderability. Due to it being extremely resistant to corrosion it doesn't tarnish easily and has a long s.. |
|||
CTE, linear | 16.2 µm/m-°C @Temperature 20.0 - 300 °C |
9.00 µin/in-°F @Temperature 68.0 - 572 °F |
|
Eagle Brass 762 Nickel Silver 12%, Extra Spring 762 is a nickel silver alloy that has excellent strength, stress relaxation resistance, and solderability. Due to it being extremely resistant to corrosion it doesn't tarnish easily and has a long s.. |
|||
CTE, linear | 16.2 µm/m-°C @Temperature 20.0 - 300 °C |
9.00 µin/in-°F @Temperature 68.0 - 572 °F |
|
Carlson 70 30 Cu Ni Copper-Nickel Alloy General DescriptionCarlson alloy 70 30 Cu Ni is a copper nickel alloy with excellent resistance to corrosion and erosion. It is strong and ductile. 70 30 Cu Ni is utilized in areas where high temp.. |
|||
CTE, linear | 16.2 - 20.0 µm/m-°C | 9.00 - 11.1 µin/in-°F | Average value: 18.3 µm/m-°C Grade Count:7 |
Overview of materials for Polycarbonate, 40% Glass Filled This property data is a summary of similar materials in the MatWeb database for the category "Polycarbonate, 40% Glass Filled". Specific grades with glass content between 35% and 44% are included. E.. |
|||
CTE, linear | 16.2 µm/m-°C @Temperature 20.0 - 95.0 °C |
9.00 µin/in-°F @Temperature 68.0 - 203 °F |
|
HP Alloys Nitronic® 50 Austenitic Stainless, Level 1 Cold Worked Cold Worked applies to tensile values and are for 0.25" to 4" diameter samples; other properties are typical of this alloy.Nitronic® 50 Stainless Steel provides a combination of corrosion resistanc.. |
|||
CTE, linear | 16.2 - 130 µm/m-°C | 9.00 - 72.2 µin/in-°F | Average value: 35.9 µm/m-°C Grade Count:17 |
Overview of materials for Polybutylene Terephthalate (PBT), Glass Filled, Impact Modified This property data is a summary of similar materials in the MatWeb database for the category "Polybutylene Terephthalate (PBT), Glass Filled, Impact Modified". Each property range of values reported.. |
|||
CTE, linear | 16.2 µm/m-°C | 9.00 µin/in-°F | |
Schmolz + Bickenbach MoldMAX XL® Copper Alloy Description: Brush Wellman’s MoldMAX XL® is a high strength copper mold alloy with good thermal conductivity. The alloy contains no beryllium and is available in sections as large as 12” thick. .. |