Thermal Properties | Metric | English | Comments |
---|---|---|---|
CTE, linear | 25.2 µm/m-°C @Temperature -40.0 - 149 °C |
14.0 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
Quadrant EPP Ketron® CM GF30 Compression Molded, 30% Glass Reinforces Polyethererther Ketone(ASTM Product Data Sheet) |
|||
CTE, linear | 25.2 µm/m-°C @Temperature -20.0 - 150 °C |
14.0 µin/in-°F @Temperature -4.00 - 302 °F |
ASTM E831 |
Polymer Resources PEI-G20 Polyetherimide, 20% Glass Reinforced Polyetherimide, 20% Glass ReinforcedProcess: Injection MoldingNotes: All physical, mechanical and thermal testing conducted on 1/8-inch thick, un-pigmented, test samples.Information provided by Poly.. |
|||
CTE, linear | 25.2 - 190 µm/m-°C | 14.0 - 106 µin/in-°F | Average value: 109 µm/m-°C Grade Count:18 |
Overview of materials for Polybutylene Terephthalate (PBT), Impact Grade This property data is a summary of similar materials in the MatWeb database for the category "Polybutylene Terephthalate (PBT), Impact Grade". Each property range of values reported is minimum and m.. |
|||
CTE, linear | 25.2 - 27.0 µm/m-°C | 14.0 - 15.0 µin/in-°F | Average value: 25.9 µm/m-°C Grade Count:5 |
Overview of materials for Polyetherimide (PEI), 20% Glass Fiber This property data is a summary of similar materials in the MatWeb database for the category "Polyetherimide, 20% Glass Fiber". Specific grades with glass content between 15% and 24% are included. E.. |
|||
CTE, linear | 25.2 µm/m-°C @Temperature 20.0 °C |
14.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
PolyOne Edgetek® SF-40GF-10 MN/000 Polyphenylene Sulfide (PPS), Glass/Mineral Filled
(discontinued **) Description/Features:Glass/Mineral ReinforcedUL 94 V0PolyOne First ChoiceInformation provided by PolyOne Corporation. |
|||
CTE, linear | 25.2 µm/m-°C @Temperature 20.0 °C |
14.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
PolyOne Edgetek® SF-47GF/000 Polyphenylene Sulfide (PPS), Glass Filled
(discontinued **) Description/Features:Glass Fiber ReinforcedUL 94 V0PolyOne First ChoiceInformation provided by PolyOne Corporation. |
|||
CTE, linear | 25.2 µm/m-°C @Temperature 22.8 - 260 °C |
14.0 µin/in-°F @Temperature 73.0 - 500 °F |
ASTM E831 |
Saint-Gobain Meldin® 7022 CM Compression Molded Graphite Filled Polyimide Melidin® 7022 CM is a compression molded polyimide that contains 40% graphite filler. This grade offers additional dimensional stability at elevated temperatures and the lowest CTE of any Meldin.. |
|||
CTE, linear | 25.2 µm/m-°C @Temperature 20.0 °C |
14.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Techmer ES Plaslube® J-50/20/SI/2 Polycarbonate, 20% GFR, 2% Silicone |
|||
CTE, linear | 25.2 µm/m-°C @Temperature -40.0 - 82.2 °C |
14.0 µin/in-°F @Temperature -40.0 - 180 °F |
ASTM D696 |
Styron EMERGEâ„¢ 8702 Polycarbonate EMERGEâ„¢ PC 8702 advanced resin is an ignition-resistant, 20% glass reinforced, polycarbonate resin. This resin contains no bromide, chloride, or phosphate additives. It is a medium flow PC re.. |
|||
CTE, linear | 25.2 µm/m-°C @Temperature 20.0 °C |
14.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Westlake Plastics Norylux™ Modified Polyphenylene Oxide 30% glass filled Norylux modified PPO is a strong, engineering plastic with outstanding mechanical, thermal, and electric properties. Low moisture absorption and low thermal expansion make Norylux one of the most d.. |
|||
CTE, linear | 25.2 µm/m-°C @Temperature 20.0 °C |
14.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Westlake Plastics Tempalux® 20% GF Polyetherimide An amorphous thermoplastic polyetherimide, stock shapes from ULTEM® resin possess a combination of useful characteristics, including high strength at elevated temperatures, high modulus, and broad .. |
|||
CTE, linear | 25.2 - 28.8 µm/m-°C @Temperature 25.0 - 125 °C |
14.0 - 16.0 µin/in-°F @Temperature 77.0 - 257 °F |
|
CMT Materials PROTOBLOCK Air Permeable Prototype Tooling Material PROTOBLOCK is a new composite material made of inorganic granules and epoxy resin engineered to form a micro-porous structure for use as prototype vacuum form or thermoform tooling. The material is.. |
|||
CTE, linear | 25.2 µm/m-°C @Temperature 20.0 °C |
14.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
Asahi Kasei Thermylene® P7-40FG-0790 40% Glass Fiber Reinforced, Heat Stabilized Information provided by Asahi Thermofil |
|||
CTE, linear | 25.2 µm/m-°C | 14.0 µin/in-°F | |
Aremco Aremco-Bond™ 2335 Ultra High Temperature Epoxy Ceramic-Filled, Low Expansion, High Lap-Shear Strength & Chemical Resistance, Low Outgassing. |
|||
CTE, linear | 25.2 µm/m-°C @Temperature 20.0 °C |
14.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
PolyOne Edgetek® NI-40GF/000 Nylon 6/10 - 40% Glass Fiber Reinforced
(discontinued **) Data provided by PolyOne. |
|||
CTE, linear | 25.2 µm/m-°C @Temperature -40.0 - 149 °C |
14.0 µin/in-°F @Temperature -40.0 - 300 °F |
ASTM E831 |
Quadrant EPP Duratron® PAI T4301 Polyamide-imide, extruded bearing grade (ASTM Product Data Sheet) |
|||
CTE, linear | 25.2 - 30.6 µm/m-°C | 14.0 - 17.0 µin/in-°F | Average value: 28.2 µm/m-°C Grade Count:3 |
Overview of materials for Polyetherimide (PEI), Aramid Fiber Filled This property data is a summary of similar materials in the MatWeb database for the category "Polyetherimide, Aramid Fiber Filled". Each property range of values reported is minimum and maximum valu.. |
|||
CTE, linear | 25.2 µm/m-°C @Temperature 20.0 °C |
14.0 µin/in-°F @Temperature 68.0 °F |
ASTM D696 |
PolyOne Edgetek® SF-45GF/000 Polyphenylene Sulfide (PPS), Glass Filled
(discontinued **) Description/Features:Glass Fiber ReinforcedUL 94 V0PolyOne First ChoiceInformation provided by PolyOne Corporation. |
|||
CTE, linear | 25.2 - 25.2 µm/m-°C @Temperature 60.0 - 138 °C |
14.0 - 14.0 µin/in-°F @Temperature 140 - 280 °F |
Average value: 25.2 µm/m-°C Grade Count:2 |
Overview of materials for Polybutylene Terephthalate (PBT), Glass + Mineral Filled This property data is a summary of similar materials in the MatWeb database for the category "Polybutylene Terephthalate (PBT), Glass + Mineral Filled". Each property range of values reported is min.. |