Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : Deflection Temperature at 1.8 MPa (264 psi) = 374 °F Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
120°C/h; ISO 75/1
Polykemi AB SCANMID 6 B32^ E F30 Nylon 6, Glass Fiber Reinforced, Modified
Information provided by Polykemi AB
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
DIN 53461
Qualchem Danamid FGF-30 Polyamide 6, 30% Glass Fiber
Reinforced with glass fiber.Information provided by Qualchem Zrt.
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
Flatw 80*10*4 sp=64mm; ISO 75/Af
SABIC Innovative Plastics LNP COLORCOMP E1000 PEI (Europe-Africa-Middle East)
LNP* COLORCOMP* E1000 is a compound based on Polyetherimide resin.
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
ISO 75-1/-2
DSM Akulon® K224-PG2U (Dry) 13% Glass Reinforced, Impact Modified Nylon 6 (North America)  (discontinued **)&l
Description: The Akulon portfolio is engineered for optimum performance to suit different processing techniques and end use markets.Unfilled Extrusion ResinsAkulon resins are available with melt vis..
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
ASTM D648
Fiberfil® M-2500 BK Nylon 6, 15% Glass Reinforced, 25% mineral Filled, post industrial
Information provided by FIBERFIL Engineered Plastics
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
ISO 75-1, -2
Lanxess Durethan® BG 30 X W1 000000 Nylon 6, Glass Fiber Reinforced
PA 6, 30% glass fibers/glass spheres, injection molding, low tendency to warp, weather stabilizedInformation provided by LANXESS.
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
ISO 75-1/-2
Lanxess Durethan® BKV 115 H2.0 901510 Copolyamide, 15% Glass Fiber
CoPA, injection molding grade, 15% glass fibers, elastomer-modified, electroplateable, higher notched impact strength and also higher energy absorption under biaxial impact load than BKV 15, even in..
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
LATI Laticonther 62 CPG/750 PA 6, Glass Fiber Reinforced
High thermal conductivity product based on Polyamide 6 (PA6). Special filler. Glass fibers. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInformation provided..
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
ISO 75/Af
Solvay TECHNYL® eXten D238 V30 Nylon 6,10, 30% glass fiber, DRY
Description: TECHNYL® eXten D 238 V30 is a PA6,10 30% glass fiber reinforced and impact modified suitable for injection molding. TECHNYL® eXten D 238 V30 is based on a partially bio-sourced po..
Deflection Temperature at 1.8 MPa (264 psi) 190 °C

@Thickness 6.40 mm
374 °F

@Thickness 0.252 in
unannealed; ASTM D648
SABIC Innovative Plastics ULTEM ATX200R PEI+PCE
High flow Polyetherimide blend with internal mold release. ECO Conforming, UL94 V0 Listing.
Deflection Temperature at 1.8 MPa (264 psi) 190 °C

@Thickness 6.40 mm
374 °F

@Thickness 0.252 in
unannealed; ASTM D648
SABIC Innovative Plastics ULTEM AUT195 PEI+PCE
High flow Polyetherimide blend for automotive lighting applications where highly metallized, reflective surfaces are required. Haze onset temperature of 195C (SABIC test method).
Deflection Temperature at 1.8 MPa (264 psi) 190 °C

@Thickness 6.40 mm
374 °F

@Thickness 0.252 in
unannealed; ASTM D 648
SABIC Innovative Plastics Ultem HATX200 PEI+PCE (Asia Pacific)
High flow Polyetherimide blend. ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (ISO 10993 or USP Class VI), food contact compli..
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
Edgew 120*10*4 sp=100mm; ISO 75/Ae
SABIC Innovative Plastics ULTEM HU1000E PEI (Asia Pacific)
Transparent, standard flow Polyetherimide (Tg 217C) with internal mold release. ECO Conforming. For medical devices and pharmaceutical applications. Healthcare management of change, biocompatible (..
Deflection Temperature at 1.8 MPa (264 psi) 190 °C

@Thickness 3.20 mm
374 °F

@Thickness 0.126 in
unannealed; ASTM D648
SABIC Innovative Plastics Valox® IQNH4550 PBT (Asia Pacific)
Valox* iQNH4550 resin is a non-brominated/non-chlorinated flame retardant product based on an environmentally sustainable Valox iQ* PBT resin. Post-consumer recycle (PCR) usage is 31% based on EPEAT..
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
ISO 75
Wellman Wellamid® MRGF30/10 42H-N 30% Mineral/10% Glass Fiber Reinforced Nylon 6, Heat Stabilized
Typical Applications: Lawn and garden equipment, automotive trim, bezels, wheel covers, window frames, gas tank filler housings, brackets, metalized lighting reflectors for automotive, automotive co..
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
dry; ISO 75-1/-2
DSM Stanyl® TS350 PA46 FR(17)
Unreinforced, Flame Retardant
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
ISO 75-1/-2
DSM Stanyl® TW300 Nylon 46 (European and Asian Grade) (Dry)
Stanyl is a high performance polyamide providing good performance and value across a broad range of automotive and electronic applications. Stanyl offers:Highest mechanical properties at high temper..
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
dry; ISO 75-1/-2
DSM Stanyl® TW341-N PA46
Heat Stabilized, Lubricated
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
ISO 75-1/-2
DSM Stanyl® TW371 (DAM) Nylon 46 Heat Stabilized, PTFE Lubricated (North America)
Information provided by DSM Engineering Plastics.
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
ISO 75
Eurotec® Tecodur® PB70 GR17 BK002 FA20 PBT, 17% glass fiber reinforced, flame retardant - halogen (RoHS compliant), black
Information provided by Eurotec®
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
ISO 75-1/-2
DSM Stanyl® TW341 Nylon 46 (European and Asian Grade) (Dry)
Stanyl is a high performance polyamide providing good performance and value across a broad range of automotive and electronic applications. Stanyl offers:Highest mechanical properties at high temper..
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
cond.; ISO 75
Azoty Tarnow™ Tarnamid® T-27 GF30 FRV0 Polyamide 6 - Flame Retarded, Reinforced
Flame retarded grades, flammability class V0, reinforced with 30% glass fibers, without addition of any halogen compounds, red phosphorus and asbestos, doesn't release any toxic gases during burning..
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
ASTM D648
Chang Chun Plastic Longlite PM T310 Impact Phenolic Molding Compound
ASTM Grade per ASTM D700 is 13.Information provided by Dowell Trading Company Ltd.
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
ISO data
BASF Capron® 8331G HS Blend Impact Modified, 14% Glass-Filled Nylon 6 (Dry)  (discontinued **)
Capron 8331G HS Blend is a 14% glass fiber reinforced, heat stabilized, polyamide 6 molding compound developed for applications requiring improved toughness in combination with a balance of strength..
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
Edgew 120x10x4, sp=100 mm; ISO 75/Af
Eurostar Staramide BG3H PA6, 15% Glass Filled, Injection Molded
BG3H is a Heat Stabilized, 15% Glass Fiber Reinforced Polyamide 6 Injection Molding ResinInformation provided by Polymer Technology & Services, the North American exclusive supplier.
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
Flatw 80*10*4 sp=64mm; ISO 75/Af
SABIC Innovative Plastics LNP Stat-kon PX98038 PA 6 (Europe-Africa-Middle East)
LNP* STATKON* PX98038 is a compound based on PA6 resin containing Carbon Fiber, Glass Fiber, Flame Retardant. Added features include : Flame Retardant, Electrically Conductive, Heat Stabilized.This ..
Deflection Temperature at 1.8 MPa (264 psi) 190 °C
374 °F
dry; ISO 75-1/-2
DSM Stanyl® TE300 PA46
Heat Stabilized
Copyright © lookpolymers.com All Rights Reserved