Songhan Plastic Technology Co.,Ltd.
 POLYMER SEARCH

Polymer Property : CTE, linear = 15.59 µm/m-°C Product List

Thermal Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.
Thermal Properties Metric English Comments
CTE, linear 15.59 µm/m-°C

@Temperature 100 °C
 8.661 µin/in-°F

@Temperature 212 °F
Special Metals INCOLOY® 25-6HN Super-Austenitic Stainless Steel
INCOLOY alloy 25-6HN is a super-austenitic stainless steel containing 6% molybdenum and with properties enhanced by its content of nitrogen. Its high content of nickel results in thermal stability ..
CTE, linear 15.59 µm/m-°C

@Temperature 24.0 - 500 °C
 8.661 µin/in-°F

@Temperature 75.2 - 932 °F
 Mean
Special Metals INCONEL® 706 Precipitation Hardening Alloy, Cold Rolled Sheet, 2 Part Heat Treatment, 0.040 inch (1.02 mm) Thickness
Tensile strength (ultimate and yield), shear strength, and elongation values reported here are typical for Cold Rolled Sheet, 2 Part Heat Treatment, 0.040 inch (1.02 mm) Thickness samples. Density a..
CTE, linear 15.59 µm/m-°C

@Temperature 24.0 - 500 °C
 8.661 µin/in-°F

@Temperature 75.2 - 932 °F
 Mean
Special Metals INCONEL® 706 Precipitation Hardening Alloy, Cold Rolled Sheet, 3 Part Heat Treatment, 0.040 inch (1.02 mm) Thickness
Tensile strength (ultimate and yield), shear strength, and elongation values reported here are typical for Cold Rolled Sheet, 3 Part Heat Treatment, 0.040 inch (1.02 mm) Thickness samples. Density a..
CTE, linear 15.59 µm/m-°C

@Temperature 24.0 - 500 °C
 8.661 µin/in-°F

@Temperature 75.2 - 932 °F
 Mean
Special Metals INCONEL® 706 Precipitation Hardening Alloy, Cold Rolled Sheet, 3 Part Heat Treatment, 0.062 inch (1.57 mm) Thickness
Tensile and bearing strengths (ultimate and yield) and elongation values reported here are typical for Cold Rolled Sheet, 3 Part Heat Treatment, 0.062 inch (1.57 mm) Thickness samples. Density and m..
CTE, linear 15.59 µm/m-°C

@Temperature 24.0 - 500 °C
 8.661 µin/in-°F

@Temperature 75.2 - 932 °F
 Mean
Special Metals INCONEL® 706 Precipitation Hardening Alloy, Cold Rolled Sheet, Solution Treated
Tensile strength (ultimate and yield), and elongation values reported here are typical for Cold Rolled Sheet, Solution Treated samples. Density and magnetic permeability are typical of annealed INCO..
CTE, linear 15.59 µm/m-°C

@Temperature 24.0 - 500 °C
 8.661 µin/in-°F

@Temperature 75.2 - 932 °F
 Mean
Special Metals INCONEL® 706 Precipitation Hardening Alloy, Forged Disc, 2 Part Heat Treatment
Tensile strength (ultimate and yield), reduction of area, and elongation values reported here are typical for Forged Disc, 2 Part Heat Treatment samples. Density and magnetic permeability are typica..
CTE, linear 15.59 µm/m-°C

@Temperature 24.0 - 500 °C
 8.661 µin/in-°F

@Temperature 75.2 - 932 °F
 Mean
Special Metals INCONEL® 706 Precipitation Hardening Alloy, Forged Disc, 3 Part Heat Treatment
Tensile strength (ultimate and yield), reduction of area, and elongation values reported here are typical for Forged Disc, 3 Part Heat Treatment samples. Density and magnetic permeability are typica..
CTE, linear 15.59 µm/m-°C

@Temperature 24.0 - 500 °C
 8.661 µin/in-°F

@Temperature 75.2 - 932 °F
 Mean
Special Metals INCONEL® 706 Precipitation Hardening Alloy, Forged Disc, Solution Treated
Tensile strength (ultimate and yield), reduction of area, and elongation values reported here are typical for Forged Disc, Solution Treated samples. Density and magnetic permeability are typical of ..
CTE, linear 15.59 µm/m-°C

@Temperature 24.0 - 500 °C
 8.661 µin/in-°F

@Temperature 75.2 - 932 °F
 Mean
Special Metals INCONEL® 706 Precipitation Hardening Alloy, Hot Finished Flat, 2 Part Heat Treatment, 1.250 inch (31.8 mm) Thickness
Tensile strength (ultimate and yield), shear strength, compressive strength, reduction of area, and elongation values reported here are typical for Hot Finished Flat, 2 Part Heat Treatment, 1.250 in..
CTE, linear 15.59 µm/m-°C

@Temperature 24.0 - 500 °C
 8.661 µin/in-°F

@Temperature 75.2 - 932 °F
 Mean
Special Metals INCONEL® 706 Precipitation Hardening Alloy, Hot Finished Rod, 3 Part Heat Treatment, 0.562 inch (14.3 mm) Diameter
Tensile strength (ultimate and yield), shear strength, reduction of area, and elongation values reported here are typical for Hot Finished Rod, 3 Part Heat Treatment, 0.562 inch (14.3 mm) Diameter s..
CTE, linear 15.59 µm/m-°C

@Temperature 24.0 - 500 °C
 8.661 µin/in-°F

@Temperature 75.2 - 932 °F
 Mean
Special Metals INCONEL® 706 Precipitation Hardening Alloy, Hot Finished Rod, 3 Part Heat Treatment, 8.0 inch (203 mm) Diameter
Tensile strength (ultimate and yield), compressive strength, reduction of area, and elongation values reported here are typical for Hot Finished Rod, 3 Part Heat Treatment, 8.0 inch (203 mm) Diamete..
CTE, linear 15.59 µm/m-°C

@Temperature 24.0 - 500 °C
 8.661 µin/in-°F

@Temperature 75.2 - 932 °F
 Mean
Special Metals INCONEL® 706 Precipitation Hardening Alloy, Cold Rolled Sheet, 2 Part Heat Treatment, 0.062 inch (1.57 mm) Thickness
Tensile and bearing strengths (ultimate and yield) and elongation values reported here are typical for Cold Rolled Sheet, 2 Part Heat Treatment, 0.062 inch (1.57 mm) Thickness samples. Density and m..
CTE, linear 15.59 µm/m-°C

@Temperature 24.0 - 500 °C
 8.661 µin/in-°F

@Temperature 75.2 - 932 °F
 Mean
Special Metals INCONEL® 706 Precipitation Hardening Alloy, Hot Finished Rod, 2 Part Heat Treatment, 0.562 inch (14.3 mm) Diameter
Tensile strength (ultimate and yield), shear strength, reduction of area, and elongation values reported here are typical for Hot Finished Rod, 2 Part Heat Treatment, 0.562 inch (14.3 mm) Diameter s..
Copyright © lookpolymers.com All Rights Reserved