- HOME
- POLYMER SEARCH
- Polymer Property : Vicat Softening Point = 212 °F
Polymer Property : Vicat Softening Point = 212 °F Product List
Thermal PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| Vicat Softening Point | 100 °C | 212 °F | Rate A, ASTM D1525 |
| Plaskolite West Optix® CA-1000 IG UC Clear High Impact Acrylic Resin High impact acrylic resin, injection molding and extrusion gradeApplications: A premium impact acrylic resin particularly suited for medical and food uses. This resin is suited for Gamma irradiatio.. |
|||
| Vicat Softening Point | 100 °C | 212 °F | |
| Polycasa Acryl® G 77 Acrylic, Injection Molding Grade Injection molding grade for record player covers, optical fibers, display windows, logos, condiment containers, desk organizers.Data was collected by ISO methods.Quinn Manufacturing Group rebranded .. |
|||
| Vicat Softening Point | 100 °C | 212 °F | Rate B/120; ISO 306 |
| SABIC Innovative Plastics Cycolac® S702S ABS (Europe-Africa-Middle East) CYCOLAC S702S is a high impact ABS combined with a good flow. This material is developed for enclosures and housings found in appliances and automotive industries. Cycolac S702S is anti-dust equiped.. |
|||
| Vicat Softening Point | 100 °C @Load 5.001 kg |
212 °F @Load 11.03 lb |
50°C/h; ISO 306 |
| Polykemi AB POLYabs P0P ABS, Plating Grade Information provided by Polykemi AB |
|||
| Vicat Softening Point | 100 °C @Load 1.00 kg |
212 °F @Load 2.21 lb |
50°C/h; ISO 306 |
| Polykemi AB POLYabs T00 GF20 ABS, Glass Fibre-Reinforced Information provided by Polykemi AB |
|||
| Vicat Softening Point | 100 °C | 212 °F | ASTM D1525 |
| Albis Plastics Cellulose Acetate Butyrate B9024 (UVI, Odor Mask Added), 13% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T.. |
|||
| Vicat Softening Point | 100 °C | 212 °F | ASTM D1525 |
| LyondellBasell Petrothene® NA345196 Low Density Polyethylene (Film Extrusion) ApplicationsPETROTHENE NA 345 is a series of homopolymer resins combining premium clarity with strength and stiffness. In addition, NA 345 exhibits good impact strength on both flat and creased fil.. |
|||
| Vicat Softening Point | 100 °C | 212 °F | ASTM D1525 |
| Lucky CF-920 Acrylic May be UV stabilized. General Lucky PMMA qualities: Transparent/elegant appearance, high heat and weather resistance, excellent chemical resistance and coloring capability. |
|||
| Vicat Softening Point | 100 °C | 212 °F | ASTM D1525 |
| KKPC Kuhmo HI 420T Transparent HIPS Key features: Translucent Extrusion. Common Uses: Transparent toys, glass cases, various products made by injection molding needing contact-movability.HIPS is a functional resin made by copolymeriza.. |
|||
| Vicat Softening Point | 100 °C @Load 5.00 kg |
212 °F @Load 11.0 lb |
|
| LATI Latiohm 36/07 PD01 G/20 ABS, 20% Glass Fiber Reinforced Semiconductive/dissipative product based on Acrylonitrile-Butadiene-Styrene copolymer (ABS). Glass fibers. Availability: Africa & Middle East; Asia Pacific; Europe; Latin America; North AmericaInfor.. |
|||
| Vicat Softening Point | 100 °C | 212 °F | Rate B/50; ISO 306 |
| SABIC Innovative Plastics XYLEX X8303CL PC+POLYESTER (Asia Pacific) PC+ POLYESTER, Transparent, Low processing Temperature, High flow with excellent impact, UV stabilized, OQ quality. For In Mold Decoration /Labeling. |
|||
| Vicat Softening Point | 100 °C | 212 °F | Rate B/120; ISO 306 |
| SABIC Innovative Plastics XYLEX X8303CL PC+POLYESTER (Asia Pacific) PC+ POLYESTER, Transparent, Low processing Temperature, High flow with excellent impact, UV stabilized, OQ quality. For In Mold Decoration /Labeling. |
|||
| Vicat Softening Point | 100 °C | 212 °F | Rate B/50; ISO 306 |
| SABIC Innovative Plastics XYLEX X8303CL PC+POLYESTER (Europe-Africa-Middle East) PC+ POLYESTER, Transparent, Low processing Temperature, High flow with excellent impact, UV stabilized, OQ quality. For In Mold Decoration /Labeling. |
|||
| Vicat Softening Point | 100 °C | 212 °F | Rate B/120; ISO 306 |
| SABIC Innovative Plastics XYLEX X8303CL PC+POLYESTER (Europe-Africa-Middle East) PC+ POLYESTER, Transparent, Low processing Temperature, High flow with excellent impact, UV stabilized, OQ quality. For In Mold Decoration /Labeling. |
|||
| Vicat Softening Point | 100 °C | 212 °F | B/50; ISO R306 |
| Samsung Cheil Industries Starex® MP-0670 ABS, Metal Plating Grade Information provided by Samsung Cheil Industries. |
|||
| Vicat Softening Point | 100 °C | 212 °F | B/50; ISO R306 |
| Samsung Cheil Industries Starex® SF-0950 MABS, Unreinforced Scratch Resistant Information provided by Samsung Cheil Industries. |
|||
| Vicat Softening Point | 100 °C | 212 °F | ISO 306 |
| SIDPEC EGYPTENE® LL 0205 AF LLDPE Film Applications:Heavy duty sacks, mulch filmsStretch film, liners, geomembraneFilm properties were measured on 38 micron film extruded at a blow up ratio of 2:1.Information provided by Interchim s.r.l... |
|||
| Vicat Softening Point | 100 °C | 212 °F | ASTM D1525 |
| PlastxWorld CEVIAN® SERG1 10% GF ABS Glass fiber reinforced and flame retarded ABS.These are typical values and are not intended for specification purposes. UL approved file No. is E47773. Information provided by PlastxWorld Inc. |
|||
| Vicat Softening Point | 100 °C | 212 °F | ASTM D1525 (A120) |
| Total Lotrene® Q2018H Linear Low Density Polyethylene, Blown Film Lotrene® Q2018 Series are Linear Low Density Polyethylene resins produced in a gas phase reactor using butene (C4) co-monomer. They are designed for film applications and can be used in pure form .. |
|||
| Vicat Softening Point | 100 °C | 212 °F | ASTM D1525 |
| Toyobo A2080A Thermoplastic Polyurethane Elastomer, Injection Grade Polycaprolactone type, featuring a good balance of mechanical strength and chemical resistance. Various grades of Toyobo polyurethane TPEs are used in auto parts, hoses, tubes, sporting goods, shoe.. |
|||
| Vicat Softening Point | 100 °C | 212 °F | ASTM D1525, ISO 306 |
| DuPont™ Bynel® 41E755 Anhydride Modified LLDPE BYNEL® Series 4100 resins are anhydride-modified, linear low-density polyethylene (LLDPE) resins. All 4100 series resins are available in pellet form for use in conventional extrusion and coextrusi.. |
|||
| Vicat Softening Point | 100 °C | 212 °F | ISO R-306; 49N |
| Diapolyacrylate Shinko-Lac® U400B Transparent ABS Shinko-Lac® is a registered trademark of Diapolyacrylate Company Limited. Information provided by Dayson Polymers. |
|||
| Vicat Softening Point | 100 °C | 212 °F | ASTM D1525 |
| C.O.I.M. LARIPUR® LPR9020 Standard Adipate Ester Polyurethane Description: The products of the LARIPUR® line are thermoplastic polyurethanes. These products combine the technology of thermoplastic products with the features of polyurethanes:Excellent abrasion.. |
|||
| Vicat Softening Point | 100 °C | 212 °F | |
| BASF Procom® X25H 650 Polypropylene Electrical and domestic appliances, housings where high gloss is required.Data was collected by ISO methods and provided by BASF. |
|||
| Vicat Softening Point | 100 °C | 212 °F | B |
| Plastcom SLOVALEN PH 61 GB 30 PP, 30% glass beads, mod. of mech. prop. FeaturesModified homopolymer PP for injection moulding, chemically reinforced with 30% glass beads, contains the modifier of mechanical properties. Increased strength in comparison with unfilled PP... |
|||
| Vicat Softening Point | 100 °C | 212 °F | ASTM D1525 |
| Ineos Nova 6100 Super High Impact Polystyrene
(discontinued **) Good balance of gloss and impact, High glossApplications: Thermoformed and molded packaging, Drink cups and lids, Structural foam, Custom sheetProperties were determined on injection molded specimen.. |
|||
| Vicat Softening Point | 100 °C | 212 °F | ASTM D1525 |
| Albis Plastics Cellulose Acetate Butyrate B902 (UV Inhibitor Added), 13% Plasticizer
(discontinued **) Amorphous Cellulose Acetate Butyrate (CAB)Characteristics: Dimensional Stability, Weatherability and Low Temp Impact StrengthApplications: Pens, Ski Goggles, Auto Trim, Skylights, Tool Handles and T.. |
|||
| Vicat Softening Point | 100 °C | 212 °F | |
| Americas Styrenics Styron® 425 High Impact Polystyrene
(discontinued **) STYRON® 425 impact polystyrene resin is typically used in thin section parts, hot drink cups and cassettes. It offers heat resistance, easy flow, fast cycling, and excellent tensile and flex proper.. |
|||
| Vicat Softening Point | 100 °C | 212 °F | ASTM D1525 |
| Ineos Nova 6110 Super High Impact Polystyrene
(discontinued **) Good balance of gloss and impact, High glossApplications: Thermoformed and molded packaging, Drink cups and lids, Structural foam, Custom sheetProperties were determined on injection molded specimen.. |
|||
| Vicat Softening Point | 100 °C | 212 °F | ASTM D1525 |
| DuPont Bynel® 4107 Anhydride-Modified LLDPE Adhesive Resin
(discontinued **) Bynel® Series 4100 resins are anhydride-modified, linear low-density polyethylene (LLDPE) resins. All 4100 Series resins are available in pellet form for use in conventional extrusion and coextrusi.. |
|||
Copyright © lookpolymers.com All Rights Reserved