Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 565 MPa @Temperature 260 °C |
81900 psi @Temperature 500 °F |
|
Haynes Hastelloy® G-30® alloy, all-weld metal, GTAW weld 3.2 mm diameter filler wire HASTELLOY® G-30® alloy is a high chromium nickel-base alloy which shows superior corrosion resistance in commercial phosphoric acids as well as many complex environments containing highly oxid.. |
|||
Tensile Strength, Ultimate | 565 MPa @Temperature 760 °C |
81900 psi @Temperature 1400 °F |
|
Haynes Hastelloy® W alloy, gas metal arc welds, aged 1000 hours at 650°C (1200°F) Solid solution-strengthened developed as a filler metal for welding of dissimilar alloys. Applications include excellent dissimilar welding characteristics in the gas turbine, aerospace, and chemica.. |
|||
Tensile Strength, Ultimate | 565 MPa | 82000 psi | |
Universal Wire Works 410 Stainless Steel Electrode Universal 410 is a 12% straight chromium electrode used for the welding of type 410 stainless steel in the fabrication of equipment that demands corrosion resistance, good strength and ductility. Al.. |
|||
Tensile Strength, Ultimate | 565 MPa | 82000 psi | |
Universal Wire Works 502 E8018-B6 Stainless Steel Electrode Universal 502 electrodes are used for the welding of types 501 and 502 straight chromium steels. Principal applications are in the fabrication of equipment for the oil and chemical industries where .. |
|||
Tensile Strength, Ultimate | 565 - 621 MPa | 82000 - 90000 psi | |
Eagle Brass 230 Red Brass, Extra Spring CDA 230 is known for having an electrical conductivity of 37% IACS, red color, corrosion resistance, excellent formability and moderate strength. Typical uses include costume jewelry, eyelets, faste.. |
|||
Tensile Strength, Ultimate | >= 565 MPa | >= 81900 psi | |
AK Steel Full Hard Only, Grade 80 Cold Rolled Carbon Steel, Structural Steel (SS) Information provided by AK Steel |
|||
Tensile Strength, Ultimate | 565 MPa | 81900 psi | |
ATI Allegheny Ludlum AL 412™ Dual Phase 12% Cr Low carbon, nickel containing, dual phase 12% Cr stainless steel alloy. Characteristics: superior toughness to ferritic alloys, high strength, high corrosion resistance.Information provided by Alleg.. |
|||
Tensile Strength, Ultimate | 565 MPa @Temperature 371 °C |
81900 psi @Temperature 700 °F |
|
Carpenter Gall-Tough® Stainless Data provided by Carpenter Technology Corporation.6.4 mm diameter tensile specimens from center of 25.4 mm diameter bar annealed 1066°C 1 hour, water quenched, and ground.Threshold Galling Stress 1.. |
|||
Tensile Strength, Ultimate | 565 MPa @Temperature 23.0 °C |
81900 psi @Temperature 73.4 °F |
|
ATI Allegheny Ludlum Stainless Steel Free Machining Grade Type 416, Tempered at 760°C (UNS S41600) Allegheny Ludlum's 416 is a free-machining stainless steel specifically designed to exhibit improved machinability. These modifications retain, in so far as possible, the good mechanical properties.. |
|||
Tensile Strength, Ultimate | 565 MPa | 81900 psi | |
ATI Allegheny Ludlum Stainless Steel Chromium-Nickel Type 305, 0% Cold Rolled (UNS S30500) This alloy is one of the most familiar and most frequently used alloy in the stainless steel family. It may be best used in applications where the following properties are important: resistance to .. |
|||
Tensile Strength, Ultimate | 565 MPa @Temperature 649 °C |
81900 psi @Temperature 1200 °F |
at 649°C after aging |
Haynes Hastelloy® N, 1.14 mm sheet, aged 10000 hours at 649°C (1200°F) Applications include containers for molten fluoride salts. Good oxidation resistance to hot fluoride salts at 705-870°C (1300-1600°F), good oxidation resistance in air.Data provided by the manufac.. |