Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength, Ultimate | 950 MPa @Temperature 600 °C |
138000 psi @Temperature 1110 °F |
|
International Mold Steel DH21 Die Cast & Forging Steel DH21 is for aluminum die cast dies.Information provided by International Mold Steel |
|||
Tensile Strength, Ultimate | 949 MPa @Temperature -78.0 °C |
138000 psi @Temperature -108 °F |
|
Haynes Multimet® alloy, 12.7 mm (1/2 in.) thick plate, 1185°C heat treatment, water quenched Recommended for use in applications involving high stress at temperatures up to 816°C (1500°F), and moderate stresses up to 1093°C (2000°F). Excellent oxidation resistance, good ductilit.. |
|||
Tensile Strength, Ultimate | 950 MPa @Temperature 650 °C |
138000 psi @Temperature 1200 °F |
Precipitation Hardened prior to test |
Special Metals NIMONIC® Alloy PE11 A nickel-iron-chromium alloy precipitation hardened by titanium and aluminum and solid-solution strengthened by an addition of molybdenum. It was developed as a high-strength sheet alloy for use at.. |
|||
Tensile Strength, Ultimate | 950 MPa @Temperature 22.2 °C |
138000 psi @Temperature 72.0 °F |
|
Astaras ANVILOY® 1150 Tungsten Based High Temp Alloy Anviloy® 1150 is a tungsten-based material that was developed primarily for die-casting, aluminum permanent mold, and difficult extrusions. It is produced by a high temperature powder metallurgy pr.. |
|||
Tensile Strength, Ultimate | 951 MPa @Temperature 199 °C |
138000 psi @Temperature 390 °F |
Round bar 1" diameter, 310 HB |
EDRO #2 Prehardened 4130 Holder Block EDRO #2™ is a vacuum-degassed Chromium-Molybdenum-alloyed steel which is supplied in the hardened and tempered condition. EDRO #2™ is characterized by excellent machinability, good resistance to i.. |
|||
Tensile Strength, Ultimate | 951 MPa @Temperature 199 °C |
138000 psi @Temperature 390 °F |
Round bar 1" diameter, 310 HB |
EDRO #3 Prehardened Mold Quality P20 Alloy Steel EDRO #3™ is a vacuum-degassed, ladle refined, Cr-Ni-Mo- alloyed steel which is supplied in the hardened and tempered condition. EDRO #3™ is manufactured to consistently high quality standards with.. |
|||
Tensile Strength, Ultimate | 950 MPa @Temperature 22.2 °C |
138000 psi @Temperature 72.0 °F |
|
Astaras ANVILOY® 1150 Tungsten Based High Temp Alloy Anviloy® 1150 is a tungsten-based material that was developed primarily for die-casting, aluminum permanent mold, and difficult extrusions. It is produced by a high temperature powder metallurgy pr.. |