Mechanical Properties | Metric | English | Comments |
---|---|---|---|
Tensile Strength at Break | 13.4 MPa | 1940 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Wire & Cable 1604-xx27FRD Polyvinyl Chloride, Flexible (PVC, Flexible) Typical Properties of Molded Slab (0.075); Not to be Construed as Specifications.Information provided by PolyOne |
|||
Tensile Strength at Break | 13.4 MPa @Temperature 23.0 °C |
1940 psi @Temperature 73.4 °F |
Die C2 hr; ASTM D412 |
PolyOne OnFlex™ HFFR 315-01 Thermoplastic Elastomer (TPE) OnFlex™ HFFR 315-01 a is non-halogen flame retardant material designed for flexible power cord insulation, cable jackets, and ribbon cables. New Product. Commercial specifications have not been est.. |
|||
Tensile Strength at Break | 13.4 MPa | 1940 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ HC 2165 Polyvinyl Chloride, Flexible (PVC, Flexible) Geon HC 2165 is a 65 Shore A non-phthalate flexible vinyl compound made from FDA sanctioned ingredients. HC 2165 can be used for extrusion and injection molding healthcare applications.NOTE: All ing.. |
|||
Tensile Strength at Break | 13.4 MPa | 1940 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ HC 2165G Polyvinyl Chloride, Flexible (PVC, Flexible) Geon HC 2165G is a 65 Shore A non-phthalate, gamma-stable flexible vinyl compound made from FDA sanctioned ingredients. HC 2165G can be used for extrusion and injection molding healthcare applicatio.. |
|||
Tensile Strength at Break | 13.4 MPa | 1940 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible 90451 Polyvinyl Chloride, Flexible (PVC, Flexible) Automotive OEM approval(s).Information provided by PolyOne |
|||
Tensile Strength at Break | 13.4 MPa | 1940 psi | Type IV, 510 mm/min; ASTM D638 |
PolyOne Geon™ Vinyl Flexible MD403KB Polyvinyl Chloride, Flexible (PVC, Flexible) Information provided by PolyOne |
|||
Tensile Strength at Break | 13.4 MPa | 1950 psi | ASTM D1414 |
Greene Tweed CHEMRAZ® 520 Perfluoroelastomer Chemraz® 520 is recommended for a wide variety of semiconductor equipment dry processing applications where seal reliability with minimal contaminations is required. Additionally, Chemraz 520 of.. |
|||
Tensile Strength at Break | 13.4 MPa | 1950 psi | |
Shin-Etsu Silicones FE-361TU Fluorosilicone Elastomer ShinEtsu FE361 TU is one of a series of high tensile, high tear translucent fluorosilicone compounds. It is designed to process well in molding applications. It can be blended with other members of .. |
|||
Tensile Strength at Break | 13.4 MPa | 1950 psi | ASTM D638 |
Teknor Apex APEX® 3701-70NT Polyvinyl Chloride, Flexible Features: Non-DEHP Plasticizer; Ethylene Oxide Sterilizable; High Heat Resistance Uses: Medical/Healthcare Applications Processing Method: Extrusion Forms: PelletsInformation Provided by Teknor Apex.. |
|||
Tensile Strength at Break | 13.4 MPa | 1950 psi | ASTM D412 |
Teknor Apex Monprene® MP-2264B Thermoplastic Elastomer Uses: Closures; Consumer Applications; Gaskets; Handles; Kitchenware; Medical/Healthcare Applications; Packaging; Safety Equipment; Sporting Goods; Toothbrush Handles; Tubing; Writing Instruments Fo.. |
|||
Tensile Strength at Break | 13.4 MPa | 1950 psi | Press Cure 7 minutes @ 177°C, Post Cure 24 hours @ 260°C |
3M Dyneon™ FT 2430 Fluoroelastomer 3M™ Dyneon™ Fluoroelastomer FT 2430 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formul.. |
|||
Tensile Strength at Break | 13.4 MPa | 1950 psi | AVG; ASTM D412 Method A |
Seals Eastern 5717 Fluorocarbon-Elastomer FKM. General service.Information provided by Seals Eastern, Inc. |