Polymer Property : Tensile Stress = 2.28 MPa Product List

Mechanical Properties

Tips: 30 items are displayed at most. For the rest of the results, please contact customer service.

Mechanical Properties	Metric	English	Comments
Tensile Stress	2.28 MPa @Strain 100 %, Temperature 23.0 °C	331 psi @Strain 100 %, Temperature 73.4 °F	Die C2 hr; ASTM D412
PolyOne Versaflex™ OM 6160-1 Thermoplastic Elastomer (TPE) Versaflex™ OM 6160-1 is specifically designed to bond to a variety of standard and modified nylon materials, including those which are glass-filled, heat stabilized and/or impact modified. - Excell..
Tensile Stress	2.28 MPa @Strain 100 %, Temperature 23.0 °C	331 psi @Strain 100 %, Temperature 73.4 °F	Die C2 hr; ASTM D412
PolyOne Versaflex™ OM 6160-9 Thermoplastic Elastomer (TPE) Versaflex™ OM 6160-9 is specifically designed to bond to a variety of standard and modified nylon materials, including those which are glass-filled, heat stabilized and/or impact modified. - Excell..
Tensile Stress	2.28 MPa @Strain 300 %, Temperature 23.0 °C	331 psi @Strain 300 %, Temperature 73.4 °F	Die C2 hr; ASTM D412
PolyOne Dynaflex™ G2755-1000-00 Thermoplastic Elastomer (TPE) Dynaflex™ G2755-1000-00 is an easy processing TPE designed for injection molding and extrusion applications that require FDA compliance. - Good Ozone and UV Stability - Overmold Adhesion to Polypro..
Tensile Stress	2.28 MPa @Strain 300 %	331 psi @Strain 300 %	510 mm/min; ASTM D412A
PolyOne Elastamax™ HTE 1105 Styrene Butadiene Block Copolymer (SBC) Information provided by PolyOne
Tensile Stress	2.28 MPa @Strain 100 %	330 psi @Strain 100 %	ASTM D412
Teknor Apex Telcar® TL-1050-75 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets P..
Tensile Stress	2.28 MPa @Strain 100 %	330 psi @Strain 100 %	ASTM D412
Teknor Apex Telcar® TL-91-T3056D-75 Thermoplastic Elastomer Uses: Automotive Applications; Automotive Exterior Parts; Automotive Exterior Trim; Automotive Interior Parts; Blow Molding Applications; General Purpose; Grommets; Weatherstripping Forms: Pellets ..
Tensile Stress	2.28 MPa @Strain 149.65 %, Temperature 100 °C	331 psi @Strain 149.65 %, Temperature 212 °F	TPE; ISO 11403-1 -2
DuPont Performance Polymers Hytrel® 3078 Polyester Elastomer TPC-ET (Unverified Data**) 30 Shore D High Performance Polyester Elastomer with Non-discoloring Stabilizer Hytrel 3078 is a very low modulus grade with nominal hardness of 30D. It contains non-discoloring stabilizer. It can b..
Tensile Stress	2.28 MPa @Strain 0.100 %, Temperature 40.0 °C	331 psi @Strain 0.100 %, Temperature 104 °F	50%RH; ISO 11403-1 -2
DuPont Performance Polymers Zytel® HTN FE8200 NC010 Polyphthalamide (PPA) (Unverified Data**) Unreinforced Toughened PPA High Performance Polyamide Zytel HTNFE8200 NC010 is an unreinforced toughened heat stabilized lubricated high performance polyamide resin for injection molding. It is also..
Tensile Stress	2.28 MPa @Strain 149.65 %, Temperature 100 °C	331 psi @Strain 149.65 %, Temperature 212 °F	TPE; ISO 11403-1 -2
DuPont Performance Polymers Hytrel® 3078FG Polyester Elastomer TPC-ET (Unverified Data**) 30 Shore D High Performance Polyester Elastomer Developed for Food Contact ApplicationsInformation provided by DuPont Performance Polymers