- HOME
- POLYMER SEARCH
- Polymer Property : Melt Flow = 70 g/10 min
Polymer Property : Melt Flow = 70 g/10 min Product List
Physical PropertiesTips: 30 items are displayed at most. For the rest of the results, please contact customer service.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 230 °C |
70 g/10 min @Load 4.76 lb, Temperature 446 °F |
Procedure A; ASTM D1238 |
| PolyOne Maxxam™ FR PP CONC 36 NAT S Polypropylene, Unspecified (PP, Unspecified) Maxxam™ FR flame-retardant polyolefin compounds and masterbatches meet stringent flammability performance requirements defined by industry agencies, including Underwriters Laboratories UL 94 V-2, V.. |
|||
| Melt Flow | 70 g/10 min | 70 g/10 min | ASTM D1238 |
| LyondellBasell Microthene® G MN70100 Low Density Polyethylene General DescriptionMicrothene G polyolefin powders are ground, irregularly-shaped particles designed for use in a broad range of specialty applications. Microthene G powders combine the unique prop.. |
|||
| Melt Flow | 70 g/10 min | 70 g/10 min | ASTM D1238 |
| LyondellBasell Microthene® G MN71400 Low Density Polyethylene General DescriptionMicrothene G polyolefin powders are ground, irregularly-shaped particles designed for use in a broad range of specialty applications. Microthene G powders combine the unique prop.. |
|||
| Melt Flow | 70 g/10 min @Load 1.20 kg, Temperature 300 °C |
70 g/10 min @Load 2.65 lb, Temperature 572 °F |
ASTM D1238 |
| LG Chemical Lupoy 1080-70 Polycarbonate Resin Description: LUPOY PC 1080-70 resin is designed for optical media discs applications. It exhibits an excellent physical property balance of heat resistance, transparency and impact strength.Main Ch.. |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 230 °C |
70 g/10 min @Load 4.76 lb, Temperature 446 °F |
Condition L; ASTM D1238 |
| LyondellBasell Hostacomâ„¢ BG751P Polypropylene Description: Hostacomâ„¢ BG751P very high melt flow, 1,600 MPa flexural modulus, UV-stabilized, natural, 20% calcium carbonate-filled, modified polypropylene resin has a unique balance of process.. |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 250 °C |
70 g/10 min @Load 4.76 lb, Temperature 482 °F |
ASTM D 1238 |
| SABIC Innovative Plastics Valox® 295 PBT Unreinforced PBTThis data was supplied by SABIC-IP for the Americas region. |
|||
| Melt Flow | 70 g/10 min @Load 5.00 kg, Temperature 266 °C |
70 g/10 min @Load 11.0 lb, Temperature 511 °F |
ASTM D1238 |
| SABIC Innovative Plastics Valox® 865 PBT (Europe-Africa-Middle East) VALOX 865 is a 30% glass fibre reinforced, non blooming flame retardant PBT+PET blend with an excellent surface appearance. Applications: External housings, steam irons, appliance housings and light.. |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 230 °C |
70 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Sanyo J-STAT 3180 Antistatic Additive Information provided by Tomen America, a US distributor of Pelestat. |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 190 °C |
70 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| A. Schulman POLYBATCH™ AC-20531L UV Absorber Concentrate DescriptionPOLYBATCH® AC-20531L is a UV absorber concentrate containing 20% active additive based in low density polyethylene. POLYBATCH® AC-20531L is designed for use in polyethylene blown and c.. |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 230 °C |
70 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
| Borealis RJ470MO Polypropylene, Transparent Random Copolymer RJ470MO is a specially modified highly-transparent polypropylene random copolymer with very high melt flow rate and is designed for high-speed injection molding and contains nucleating and demolding.. |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 190 °C |
70 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| A. Schulman POLYBATCH™ AC-20531L UV Absorber Concentrate DescriptionPOLYBATCH® AC-20531L is a UV absorber concentrate containing 20% active additive based in low density polyethylene. POLYBATCH® AC-20531L is designed for use in polyethylene blown and c.. |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 230 °C |
70 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
| Total PPC 11712 Polypropylene, Heterophasic Copolymer ATOFINA Propylene 11712 is a nucleated controlled-rheology heterophasic copolymer. PPC 11712 is characterized by good stiffness and impact resistance as well as low shrinkage and low warpage. It h.. |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 230 °C |
70 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
| Total PPC 12642 Polypropylene, Heterophasic Copolymer, Injection Molding Polypropylene PPC 12642 is a nucleated antistatic heterophasic copolymer with high Melt Flow index of 70 g/10 min and good mechanical properties.Polypropylene PPC 10641 has been developed for high s.. |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 190 °C |
70 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| A. Schulman POLYBATCH™ AC-20531L UV Absorber Concentrate DescriptionPOLYBATCH® AC-20531L is a UV absorber concentrate containing 20% active additive based in low density polyethylene. POLYBATCH® AC-20531L is designed for use in polyethylene blown and c.. |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 160 °C |
70 g/10 min @Load 4.76 lb, Temperature 320 °F |
cm<sup>3</sup>/10 min; ISO 1133 |
| EMS-Griltech Griltex® D 1500A Copolyamide Hotmelt Adhesive (Technical Applications) Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo.. |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 160 °C |
70 g/10 min @Load 4.76 lb, Temperature 320 °F |
cm<sup>3</sup>/10 min; ISO 1133 |
| EMS-Griltech Griltex® D 1516A Heat Stabilized Copolyamide Hotmelt Adhesive (Technical Applications) GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides for excellent r.. |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 160 °C |
70 g/10 min @Load 4.76 lb, Temperature 320 °F |
cm<sup>3</sup>/10 min; ISO 1133 |
| EMS-Griltech Griltex® D 1694A Copolyamide Hotmelt Adhesive (Apparel Interlinings) Description: GRILTEX adhesive products, either in pellet or powdered form, are used to coat apparel interlining substrates. Interlining substrates, coated with GRILTEX adhesive products, provides fo.. |
|||
| Melt Flow | 70 g/10 min @Load 5.00 kg, Temperature 280 °C |
70 g/10 min @Load 11.0 lb, Temperature 536 °F |
cm³/10min; ISO 1133 |
| DuPont Performance Polymers Rynite® RE19051 BK507 Polyethylene Terephthalate (PET) 40% Glass/Mineral Reinforced Flame Retardant Polyethylene Terephthalate Rynite RE19051 BK507 is a 40% glass and mineral reinforced flame retardant polyethylene terephthalate black resin.Information .. |
|||
| Melt Flow | 70 g/10 min @Load 10.0 kg, Temperature 220 °C |
70 g/10 min @Load 22.0 lb, Temperature 428 °F |
Melt Volume Rate (ml/10 min); ISO 1133 |
| Chi Mei Polylac® PA-756S ABS - High Flow Super high flow, medium impact |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 230 °C |
70 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Braskem TI4700P2 Impact Copolymer Polypropylene Description: Very high flexural modulus.Applications: Suggested uses include compounding, automotive interior trim, intricately designed parts, thinwalled parts, dairy containers, building and const.. |
|||
| Melt Flow | 70 g/10 min @Load 5.00 kg, Temperature 275 °C |
70 g/10 min @Load 11.0 lb, Temperature 527 °F |
ISO 1133 |
| Azoty Tarnow™ Tarnamid® T-27 MCS I Polyamide 6 - Impact Modified High impact resistance grade. Medium viscosity injection molding grade, also used for compounding, for production of monofilament, bristles and fibers.Tarnamid® has the following main properties:H.. |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 230 °C |
70 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Carmel Olefins CAPILENE® QW 73 AV Propylene Random Copolymer Description: CAPILENE® QW 73 AV is a high melt flow rate, controlled rheology polypropylene random copolymer for injection molding of clear articles. CAPILENE® QW 73 AV is clarified with antista.. |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 190 °C |
70 g/10 min @Load 4.76 lb, Temperature 374 °F |
"E"; ASTM D1238 |
| Aaron Industries AAROPRENE® ATPR 1000 80A Elastomeric Compound AAROPRENE® ATPR 1000 Series Elastomeric CompoundDurometer values may be specified. Color may be specified. |
|||
| Melt Flow | 70 g/10 min @Load 5.00 kg, Temperature 275 °C |
70 g/10 min @Load 11.0 lb, Temperature 527 °F |
ISO 1133 |
| BASF Ultramid® A3EG3 15% Glass Filled PA66 (Conditioned) Ultramid A3EG3 is a 15% glass fiber reinforced injection molding PA66 grade. It conforms to FDA requirements of 21 CFR 177.1500. |
|||
| Melt Flow | 70 g/10 min @Load 5.00 kg, Temperature 275 °C |
70 g/10 min @Load 11.0 lb, Temperature 527 °F |
ISO 1133 |
| BASF Ultramid® A3EG3 15% Glass Filled PA66 (Dry) Ultramid A3EG3 is a 15% glass fiber reinforced injection molding PA66 grade. It conforms to FDA requirements of 21 CFR 177.1500. |
|||
| Melt Flow | 70 g/10 min @Load 10.0 kg, Temperature 360 °C |
70 g/10 min @Load 22.0 lb, Temperature 680 °F |
ISO 1133 |
| BASF Ultrason E 2010 PES Ultrason E 2010 is an unreinforced, medium viscosity standard injection molding PES grade. It flows readily and offers outstanding heat resistance and dimensional stability. It conforms to FDA req.. |
|||
| Melt Flow | 70 g/10 min | 70 g/10 min | ASTM D1238 |
| Huntsman PE2075 Injection Molding Polyethylene
(discontinued **) Homopolymer and FDA compliant.Features: Very high flow rapid set-up characteristics, excellent clarity, and gloss.Applications: Injection molding: lids and difficult to fill applications.FDA Notes: .. |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 190 °C |
70 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
| A. Schulman POLYBATCH™ AC-20531L UV Absorber Concentrate DescriptionPOLYBATCH® AC-20531L is a UV absorber concentrate containing 20% active additive based in low density polyethylene. POLYBATCH® AC-20531L is designed for use in polyethylene blown and c.. |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 230 °C |
70 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
| Multibase Multi-Flex® A 6221 CUV A Black TPE Thermoplastic Elastomer Forms: PelletsProcessing Methods:Injection Molding Information provided by Multibase |
|||
| Melt Flow | 70 g/10 min @Load 2.16 kg, Temperature 235 °C |
70 g/10 min @Load 4.76 lb, Temperature 455 °F |
ASTM D1238R |
| UBE UBESTA® P3014U Powder Electronic Grade Nylon 12 Description: UBESTA Nylon 12 has an excellent termite resistance than other plastics. UBESTA contributes as a material for jacket and sheath which lay for telephone and telegram Communication System.. |
|||
Copyright © lookpolymers.com All Rights Reserved