Physical Properties | Metric | English | Comments |
---|---|---|---|
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
NOVA Chemicals Novapol® HB-L354-A HDPE Blow Molding Resin Good balance of physical and molding properties-high toughness, Excellent processability on high-speed, multiple-head blow molding lines, UL-94HB listedApplications: Household chemical bottles, Indu.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
Chevron Phillips HiD® 9354 HDPE Natural Pipe Resin
(discontinued **) Resin Type: gas phase linear hexane copolymerApplications: corrugated pipe applicationsInformation provided by Chevron Phillips Chemical Company. |
|||
Melt Flow | 0.30 g/10 min | 0.30 g/10 min | ±30% |
Kazanorgsintez 15313-003 High Pressure Polyethylene Production Method: HDPE is produced by high pressure ethylene polymerization in tubular reactors. Application: Intended for production of bags, pipes, fittings, articles designed for food contac.. |
|||
Melt Flow | 0.30 - 0.70 g/10 min | 0.30 - 0.70 g/10 min | ±18% |
Kazanorgsintez 298-285 High Density Polyethylene Composite Production Method: Compositions are achieved by ethylene copolymerization by gaseous-phase method at low pressure using complex catalysts on carrier material. Application: HDPE compositions 296-.. |
|||
Melt Flow | 0.30 g/10 min | 0.30 g/10 min | ASTM D1238 |
LyondellBasell Petrothene® LR732031 High Density Polyethylene ApplicationsPETROTHENE LR 7320-31 is a high density polyethylene resin that exhibits an excellent balance of stiffness and environmental stress crack resistance. This resin has outstanding extrusio.. |
|||
Melt Flow | 0.30 g/10 min | 0.30 g/10 min | ASTM D1238 |
Hyosung Topilene B200P PP B200P Applications: Industrial pipesCharacteristics: Chemical resistanceInformation provided by Hyosung Corporation |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 374 °F |
|
Imerys ImerPlastâ„¢ 15L Recycled Polyolefin for Pipe Extrusion Polyolefin/Mineral CompoundInformation provided by Imerys. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
Ineos TC46-25 HDPE TC46-25 is a natural high density polyethylene copolymer designed specifically for telecommunications ducting to meet or exceed the material requirements in ASTM F2160, UL 651B and MEMA TC-7. TC46-.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 230 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
Inno-Comp INNOPOL® CS 4-8000 Polypropylene Random Copolymer INNOPOL® CS 4-8000 is a polypropylene random copolymer. This grade is available in nature and custom colored form.INNOPOL® CS 4-8000 is highly suitable for pressure pipe manufacturing, includi.. |
|||
Melt Flow | 0.30 g/10 min @Load 5.00 kg, Temperature 200 °C |
0.30 g/10 min @Load 11.0 lb, Temperature 392 °F |
ASTM D1238 |
Techmer ES Plastiblend® ABS E Availability: North AmericaForms: PelletsFeatures: High ViscosityProcessing Method: Blow Molding and ExtrusionInformation provided by TP Composites, Inc. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 230 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
Borealis Beta-PPR™ RA7050 Polypropylene-Random-Copolymer for Pressure Pipe Systems Beta-PPR RA7050 is a PP-RCT, a Polypropylene-Random-Copolymer with an enhanced Crystalline structure brought about by a special ß-nucleation and with an improved Temperature resistance. Proof of t.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 230 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
Teknor Apex TELCAR® 1050-80 Thermoplastic Elastomer Information provided by Teknor Apex Company |
|||
Melt Flow | 0.30 g/10 min @Load 5.00 kg, Temperature 190 °C |
0.30 g/10 min @Load 11.0 lb, Temperature 374 °F |
ISO 1133 |
Borealis Bormed™ LE6609-PH LDPE for Pharmaceutical Blow Molding Bormed LE6609-PH is a LD-polyethylene produced in a high-pressure process intended for blow molding of soft and flexible packages for pharmaceutical products.Bormed LE6609-PH can be used in "blow-fi.. |
|||
Melt Flow | 0.30 g/10 min @Load 5.00 kg, Temperature 190 °C |
0.30 g/10 min @Load 11.0 lb, Temperature 374 °F |
ISO 1133 |
Borealis Borstar® HE3474-LS Blue HDPE Compound for The Coextrusion of Identifying Stripes On Black HD Pipe for Drinking Water Borstar HE3474-LS is a bimodal, high density polyethylene compound designed for coextrusion of blue identifying stripes. It is fully stabilized against thermal degradation and the die build-up duri.. |
|||
Melt Flow | 0.30 g/10 min @Load 5.00 kg, Temperature 190 °C |
0.30 g/10 min @Load 11.0 lb, Temperature 374 °F |
ISO 1133 |
Borealis Borstar® HE3494-LS Dark Blue High Density Polyethylene for Drinking Water Pipes Borstar HE3494-LS is a yellow-orange, cadmium free, high density polyethylene compound classified as a MRS 10.0 material (PE100) produced with the advanced Borstar technology. It includes a combina.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 230 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
Borealis RA130E-2491 Polypropylene Random Copolymer RA130E-2491 is a high molecular weight, low melt flow rate polypropylene random copolymer (PP-R) compound and is blue colored. Applications: domestic water, heating, relining, plumbing, and industr.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 374 °F |
Condition E; ASTM D1238 |
Formosa Plastics Formolene® HB4903 Blow Molding HDPE Hexene CopolymerApplications: High performance blow molding applications, fuel tanks, seating, garbage cans, sheet, large industrial containers.Formolene HB4903 is a high performance copolymer that .. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 230 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 446 °F |
ISO 1133 |
Total PPC 1640 Polypropylene, Heterophasic Copolymer, Non-pressure Pipes Polypropylene PPC 1640 is a nucleated heterophasic (block) copolymer with a Melt Flow index of 0.3 g/10 min. This resin has a long-term heat stabilization package. It exhibits high stiffness in co.. |
|||
Melt Flow | 0.30 g/10 min @Load 5.00 kg |
0.30 g/10 min @Load 11.0 lb |
ISO 1133 |
Total Xsene® XS10 B HDPE, pipe, injection molding FINATHENE® XS10 B is a high density polyethylene based on C6 hexene as co-monomer and is produced by the Fina Double Loop Technology™. FINATHENE® XS10 B is a high performance black compound speci.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
Chevron Phillips MarFlex® HHM TR-130 MDPE Film Resin Medium density resin provides overall balance of tensile, impact, and tear properties in film. It is suited for merchandise, produce, and trash bags. Processing performance is excellent on high st.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
ExxonMobil Enable™ 27-03HH Metallocene Polyethylene Resin (European Grade) Product Description: Enable 27-03HH is a metallocene ethylene-hexene copolymers. Enable mPE resins offer an outstanding balance between processing and film properties, including tensile, impact and .. |
|||
Melt Flow | 0.30 g/10 min @Load 5.00 kg, Temperature 200 °C |
0.30 g/10 min @Load 11.0 lb, Temperature 392 °F |
Procedure A Condition G; ASTM D1238 |
Diamond Polymers ABS 3501E Natural 1000 S Description: Extrusion Grade, High ImpactInformation provided by Diamond Polymers, Inc. |
|||
Melt Flow | 0.30 g/10 min | 0.30 g/10 min | Condition 190/2.16; ASTM D1238 |
Chevron Phillips Marlex® HHM 4903 High Density Ethylene Hexene Copolymer High Density Ethylene Hexene CopolymerCustomer Benefits: A high performance copolymer that can measure up to the most demanding application. Specifically formulated to provide toughness and durabil.. |
|||
Melt Flow | 0.30 g/10 min | 0.30 g/10 min | ASTM D1238 |
Aclo Accucomp ABS ABS892DL High Heat Grade |
|||
Melt Flow | 0.30 g/10 min | 0.30 g/10 min | ASTM D1238 |
Aclo Accutech ABS ABS834G10L Glass Reinforced |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 230 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 446 °F |
ASTM D1238 |
Braskem TI4003F Impact Copolymer Polypropylene Description: Extra High Izod Impact, Very High Flexural Modulus, Good Low Temperature Drop ImpactApplications: Suggested Uses Include Blow Molding, Extrusion, Profiles, PipeThis resin meets the requ.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
Bapolene® 345F Medium Density Polyethylene Film Resin Description: Bapolene 345F is a medium molecular weight film resin with excellent tensile, impact, and tear properties. Applications: Merchandise bags, produce and trash bags.Bapolene® and Bapolan®.. |
|||
Melt Flow | 0.30 g/10 min @Load 5.00 kg, Temperature 190 °C |
0.30 g/10 min @Load 11.0 lb, Temperature 374 °F |
ASTM D1238 |
Braskem HF 0147 HDPE Blown Film Extrusion Polyethylene 38µm film gauge, obtained in 75mm extruder, die gap 1.0mm, output 1.75 kg/h-cm with 2:1 BUR. Applications: Grocery and T-shirt bags; merchandise bags; frozen-food bags. Information provided by Bras.. |
|||
Melt Flow | 0.30 g/10 min @Load 2.16 kg, Temperature 190 °C |
0.30 g/10 min @Load 4.76 lb, Temperature 374 °F |
ASTM D1238 |
ExxonMobil Paxon™ AM55-003 Blow Molding Resin
(discontinued **) AM55-003 is a blow molding grade high density polyethylene copolymer containing an excellent antistat additive. It provides a good combination of stiffness and stress crack resistance. AM55-003 co.. |