Physical Properties | Metric | English | Comments |
---|---|---|---|
Specific Gravity | 0.990 g/cc | 0.990 g/cc | 23/23°C; ASTM D792 |
RheTech Products G13P100-347UV 13% Glass Fiber Reinforced Polypropylene, UV Stabilized, 109D Medium Pewter Applications: Dome lamp housingsFuel filler pocketInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Specific Gravity | 0.990 g/cc | 0.990 g/cc | 23/23°C; ASTM D792 |
RheTech Products G13P100-553UV 13% Glass Fiber Reinforced Polypropylene, UV Stabilized, (GM 501F) Dark Smoke Gray Applications: Interior trimAir ducts - distributionFuel filler pocketInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Specific Gravity | 0.990 g/cc | 0.990 g/cc | 23/23°C; ASTM D792 |
RheTech Products HP520-00 12% Talc Reinforced High Performance Polypropylene Copolymer, Non-UV Stabilized, Natural Applications: Interior trimCenter consolesGlove box binsInjection molding conditions reported in table.Information provided by RheTech Products. |
|||
Specific Gravity | 0.990 g/cc | 0.990 g/cc | 20/20°C |
LyondellBasell Glycol Ether DE Diethylene glycol ethyl ether Information provided by Lyondell. |
|||
Specific Gravity | 0.990 g/cc | 0.990 g/cc | ASTM D792 |
LG Chemical LUPOL GP2100 PP+GF10% Description: Injection Molding, PP+GF10%, General PurposeApplication: Electrical & Electronic, Automotive PartsCAS: 9003-07-0 and 65997-17-3Information provided by LG Chemical |
|||
Specific Gravity | 0.990 - 1.01 g/cc | 0.990 - 1.01 g/cc | |
Michelman® Michem® Clean 1188 Cleaning solution Description: Cleaning solution for Indigo WS6600Usage: Michem® Clean 1188 is the recommended cleaning solution for Michem® In-Line Primer 030 priming solution. This cleaner should be added to .. |
|||
Specific Gravity | 0.990 - 1.01 g/cc | 0.990 - 1.01 g/cc | |
Michelman® Michem® Emulsion 94340 Nonionic polypropylene emulsion Description: Nonionic polypropylene emulsionUsage: Michem® Emulsion 94340 a phenol free additive, is best used in floor polish and overprint varnish formulations when a high degree of slip resist.. |
|||
Specific Gravity | 0.990 - 1.01 g/cc | 0.990 - 1.01 g/cc | |
Michelman® VaporCoat® 1500 Description: Water, oil and moisture resistant product for paperUsage: VaporCoat® 1500 is a coating which provides excellent water, oil and grease resistance along with excellent MVTR properties... |
|||
Specific Gravity | 0.990 g/cc | 0.990 g/cc | |
LG Chemical NBR 6250 High Acrylonitrile Polymer Description: NBR 6250 is a copolymer of butadiene and acrylonitrile manufactured by advanced emulsion polymerization technology of Goodyear and LG Chem. NBR 6250 is a non staining, medium mooney, an.. |
|||
Specific Gravity | 0.990 g/cc | 0.990 g/cc | ASTM D792 |
SABIC Innovative Plastics LNP LUBRICOMP ML003S PP LNP* LUBRICOMP* ML003S is a compound based on Polypropylene resin containing 15% PTFE. Added features include: Heat Stabilized, Wear Resistant. |
|||
Specific Gravity | 0.990 g/cc | 0.990 g/cc | ASTM D792 |
SABIC Innovative Plastics NORYL PPX PPX7200 PPE+PP+PS (Europe-Africa-Middle East) PP+PPE+PS. Improved chemical resistance and surface aesthetics in injection molded applications. NSF61-capable. UL-94 HB listed. |
|||
Specific Gravity | 0.990 - 0.996 g/cc | 0.990 - 0.996 g/cc | ASTM D792 |
A. Schulman POLYFORT™ FPP 2181HU High Flow, Fortified, Impact Resistant Polypropylene DescriptionPolyfort® FPP 2181HU is a high flow, fortified, impact resistant polypropylene, stabilized for UV resistance, and available in automotive matched colors. Information provided by A. Schul.. |
|||
Specific Gravity | 0.990 g/cc | 0.990 g/cc | ASTM D792 |
A. Schulman POLYFORT™ FPP 1902HU Talc Fortified Polypropylene DescriptionPolyfort® FPP 1902 HU is a 10% talc fortified polypropylene. It exhibits high flow and is stabilized for UV resistance. Information provided by A. Schulman. |
|||
Specific Gravity | 0.990 g/cc | 0.990 g/cc | ISO 1183/1 |
A. Schulman FORMION™ FI 392 Ionomer Information provided by A. Schulman. |
|||
Specific Gravity | 0.990 g/cc | 0.990 g/cc | ASTM D792 |
Teknor Apex Telcar® TL-2069B Thermoplastic Elastomer Uses: Caps; Food Packaging; Liners Pellets Processing Method: Extrusion; Injection Molding; Press Molding Injection Notes: Injection Rate: Moderate-Fast Extrusion Notes: Screw Speed: 30 to 100 rpmIn.. |
|||
Specific Gravity | 0.990 g/cc @Temperature 25.0 °C |
0.990 g/cc @Temperature 77.0 °F |
|
Dow Corning 60 PRINTERS' SOLUTION 60% active emulsion of silanol-terminated polydimethylsiloxane fluid.Information provided by Dow Corning |
|||
Specific Gravity | 0.990 g/cc @Temperature 25.0 °C |
0.990 g/cc @Temperature 77.0 °F |
|
Dow Corning FZ-2110 Dow Corning® FZ-2110 is a silicone polyether supplied at 100% solids that can be dispersed in water-based formulations and compatible with solvent-based formulations. This product demonstrates anti.. |
|||
Specific Gravity | 0.990 g/cc @Temperature 25.0 °C |
0.990 g/cc @Temperature 77.0 °F |
|
Dow Corning FZ-2233 Its primary function is to produce water-in-silicone and water-in-silicone and oil emulsions with a creamy and rich appearance but leaving a light, non greasy after feel on the skin. The addition le.. |
|||
Specific Gravity | 0.990 g/cc | 0.990 g/cc | |
Dow Corning SYL-OFF® 7923 CATALYST EMULSION Syl-Off® 7923 Catalyst Emulsion is a 40% solids emulsion of vinyl functional polymer and platinum catalyst in water. A high performance catalyst recommended where fast cure speed is required.Inform.. |
|||
Specific Gravity | 0.990 g/cc @Temperature 25.0 °C |
0.990 g/cc @Temperature 77.0 °F |
|
Dow Corning SYL-OFF® PMCP7923 Catalyst Emulsion Syl-Off® 7923 Catalyst Emulsion is a 40% solids emulsion of vinyl functional polymer and platinum catalyst in water. A high performance catalyst recommended where fast cure speed is required.Inform.. |
|||
Specific Gravity | 0.990 g/cc @Temperature 25.0 °C |
0.990 g/cc @Temperature 77.0 °F |
|
Dow Corning SYL-OFF® PMCP7950 Emulsion Coating Syl-Off® 7950 Emulsion Coating is a 40% solids emulsion of a vinyl endblocked silicone polymer in water. The coating is pre-formulated with crosslinker. Provides premium release performance and fas.. |
|||
Specific Gravity | 0.990 g/cc @Temperature 25.0 °C |
0.990 g/cc @Temperature 77.0 °F |
|
Dow Corning SYL-OFF® PMCPSL 9104 Coating Syl-Off® SL 9104 Coating is a solvent-free silicone release coating for polyester substrates, providing excellent long-term anchorage to a wide range of both primed and unprimed polyester films.Inf.. |
|||
Specific Gravity | 0.990 g/cc @Temperature 25.0 °C |
0.990 g/cc @Temperature 77.0 °F |
|
Dow Corning TM-1950 EMULSION Dow Corning® TM-1950 Emulsion and Dow Corning® TM-1951 Emulsion are water-based silicone products with excellent dilution stability, which provide release of tissue paper from felt, fabric and wir.. |
|||
Specific Gravity | 0.990 g/cc @Temperature 25.0 °C |
0.990 g/cc @Temperature 77.0 °F |
|
Dow Corning XIAMETER® PMCPMEM-0008 Emulsion Is chemically equivalent to DOW CORNING® 8 EMULSION. A non-ionic, 35% active emulsion based on medium viscosity polydimethylsiloxane.Information provided by Dow Corning |
|||
Specific Gravity | 0.990 g/cc | 0.990 g/cc | ASTM D471; ISO 2781 |
Advanced Polymer Alloys DuraGrip™ DGR 6060 NC Thermoplastic Elastomer (TPE) DuraGrip® DGR 6060NC is designed to be a general purpose Thermoplastic Elastomer (TPE) that is easy to use in injection molding and extrusion processes. DGR 6060NC has an
excellent soft touch feel,.. |
|||
Specific Gravity | 0.990 g/cc | 0.990 g/cc | ISO 2782 |
AlphaGary Evoprene™ 084 Standard SBS Thermoplastic Elastomer Compound The Evoprene™ Standard is a styrene-butadiene -styrene based thermoplastic elastomer.Applications: extruded door, window and furniture seals and rubbing strips, mats, bump stops, grommets, coat han.. |
|||
Specific Gravity | 0.990 g/cc | 0.990 g/cc | ISO 2782 |
AlphaGary Evoprene™ G 927 SEBS Thermoplastic Elastomer Evoprene™ G compounds are styrene – ethylene butylene –styrene base thermoplastic elastomer with related hydrogenated block copolymers. These polymers are fully saturated so the resistance to oxi.. |
|||
Specific Gravity | 0.990 g/cc | 0.990 g/cc | Part B |
Resinlab® UR3001 Clear Two Part Urethane Encapsulant Resinlab™ UR 3001 is a clear, two component, room temperature curing urethane encapsulating system. It is designed to cure completely at room temperature. UR 3001 provides excellent environmental p.. |