- HOME
- POLYMER SEARCH
- Thermoplastic
- Nylon
- Nylon 12
- Techmer ES HiFill® PA12
Techmer ES HiFill® PA12
| Category | Polymer , Thermoplastic , Nylon , Nylon 12 |
| Manufacturer | Techmer ES |
| Trade Name | HiFill® |
| Port | Shanghai port,China |
| Trade Terms | FOB, CFR, CIF |
| Payment Terms | L/C, T/T, Western Union |
| Download PDF | Techmer ES HiFill® PA12.pdf  |
| Price | EMAIL US sales@lookpolymers.com |
Material Notes:
Availability: North AmericaForms: PelletsFeatures: Low ViscosityTPCI# 8807105Information provided by TP Composites, Inc.
| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 1.02 g/cc | 0.0368 lb/in³ | ASTM D792 |
| Water Absorption | 0.70 % @Time 86400 sec |
0.70 % @Time 24.0 hour |
ASTM D570 |
| Linear Mold Shrinkage, Flow | 0.017 cm/cm @Thickness 3.17 mm |
0.017 in/in @Thickness 0.125 in |
ASTM D955 |
| Mechanical Properties | Metric | English | Comments |
|---|---|---|---|
| Hardness, Rockwell R | 106 | 106 | ASTM D785 |
| Tensile Strength, Yield | 65.5 MPa | 9500 psi | ASTM D638 |
| Elongation at Break | 20 % | 20 % | ASTM D638 |
| Flexural Strength | 75.8 MPa | 11000 psi | ASTM D790 |
| Flexural Modulus | 1.72 GPa | 250 ksi | ASTM D790 |
| Izod Impact, Notched | 0.374 J/cm @Thickness 3.17 mm |
0.700 ft-lb/in @Thickness 0.125 in |
ASTM D256 |
| Thermal Properties | Metric | English | Comments |
|---|---|---|---|
| CTE, linear, Parallel to Flow | 126 µm/m-°C | 70.0 µin/in-°F | ASTM D696 |
| Deflection Temperature at 0.46 MPa (66 psi) | 132 °C | 270 °F | Unannealed; ASTM D648 |
| Deflection Temperature at 1.8 MPa (264 psi) | 77.8 °C | 172 °F | Unannealed; ASTM D648 |
| Electrical Properties | Metric | English | Comments |
|---|---|---|---|
| Volume Resistivity | 1.00e+11 ohm-cm | 1.00e+11 ohm-cm | ASTM D257 |
| Dielectric Strength | 25.6 kV/mm | 650 kV/in | Method A (Short-Time); ASTM D149 |
Users viewing this material also viewed the following:
- Rogers Corporation Bisco™ HT-1500 Solid Silicone Rubber
- SABIC Innovative Plastics Cycoloy® C1204HF PC+ABS (Asia Pacific)
- Multibase Multi-Flex® D 6500 TPO Thermoplastic Polyolefin Elastomer
- Hexcel® HexWeb® CR-PAA™ 3/8-5052-0.004 Phosphoric Acid Anodized Aluminum Honeycomb
- ExxonMobil LDPE LD 156BW Low Density Polyethylene Resin
- ExxonMobil Oppalyte™ 35MW647 OPP Film
- DuPont Performance Polymers Rynite® FR530 BK507 Polyethylene Terephthalate (PET) (Unverified Data**)
- Esstech V-117-1190 Barium Borosilicate Glass
- Amco PRIMATOP HDPE 006964 Blow Molding Polyethylene
Copyright © lookpolymers.com All Rights Reserved