Styron Magnumâ„¢ HPC 952 ABS, High Gloss

MAGNUM® ABS resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. MAGNUM ABS resin are available in a wide range of melt flow rates, impact strength and heat resistance for both high and low gloss applications manufactured by injection molding, sheet or profile extrusion and thermoforming.The sheet and thermoforming grades of MAGNUM ABS resins provide excellent high and low gloss aesthetics, good thermal color stability, heat and impact resistance and stiffness for uses such as luggage, tool cases, burial vault liners, signs and recreation vehicle applications. Offering ranges in melt flow rates from 1.0 to 4.0, sheet Izod impacts from 130 to 560 J/m and sheet flexural modulus from 1960 to 2070 MPa, MAGNUM ABS resins can fill a variety of needs.MAGNUM HPC 952 ABS resin is the stiffest grade in the high gloss, sheet product line. With a melt flow rate of 1.2 g/10 min., MAGNUM HPC 952 has very good impact strength, good tensile and flexural properties and a Gardner 60. Gloss of 65 - 95 % as measured on thermoformed parts.Data provided by Dow Chemical.This product line was spun off from Dow Chemical to Styron in 2010.