Styron Magnumâ„¢ 9030 ABS, High Gloss

MAGNUM® ABS resins are thermoplastic materials which provide an excellent balance of processability, impact resistance and heat resistance as imparted by the various polymer compositions. MAGNUM ABS resin are available in a wide range of melt flow rates, impact strength and heat resistance for both high and low gloss applications manufactured by injection molding, sheet or profile extrusion and thermoforming.The MAGNUM 9000 series of high gloss ABS resins are designed to offer a wide range of impact strengths and melt flow rates to meet the needs of the durables injection molding markets. The 9000 series products offer typical Izod impact strength values from 210 to 400 J/m and melt flow rates ranging from 2.5 to 7.0 g/10min. The gloss values are typically greater than 95% on the 60. Gardner scale for the highest gloss resins and greater than 90% for those products having a broader range of gloss.MAGNUM 9030 ABS resin is one of the highest gloss resins combined with the highest impact strength and lowest melt flow rate in the 9000 series. MAGNUM 9030 is used primarily in injection molding applications like floor care equipment where this level of impact resistance is required.Data provided by Dow Chemical.This product line was spun off from Dow Chemical to Styron in 2010.